Originally Posted by JDTHESHERIFF (Post 4458445)

WOW.... that's a great price! I was charged $800 and I thought that was a goog price. Between all the stainless 2.5 and 3" price, plus a Race bullet muffler. At startup it's loud till the idle dies down. Around town, on the throttle, its LOUD and ANGY, Now...I have the 8 speed automatic (I can't drive a manual because i almost lost my left foot in the line of duty Law Enforcement in 05, and then had my right leg amputated and re attached in 2011 in an accident. I have very little use of left leg and didn't want hand controls. So I learned to drive with my left foot on brake and right foot on gas. I use a Pedal Commander to adjust the sensitivity of the throttle very sensitive so it doesn't take much movement of my right foot to accelerate). On the highway between 60-80, I'm under 2000rpm, and you can barely here it. Plus...I have an open K&N typhoon intake, and Forge hard pipes that remove the plastic intake muffler (all heat shielded to avoid heat sink) So...it roars from both ends and burples and pops. Add in a DINAN ELITE TUNER and MAD CUSTOMS transmission tuner, the intake, exhaust, transmission tuner, pedal commander, exhaust w/o 2nd cat; and it can MOVE and ROAR! I left in the resonator to avoid interior drone and tuned out the fake Active Sound Design, have the HK premium entertainment system with BAVSOUND Woofers under the seat; and it is pleasant at highway speeds. I will try to get sound clips, but trust me, it's a LOUD little wagon when it wants to be.

Originally Posted by JDTHESHERIFF (Post 4468933)

Madnessautoworks TCU auto flas. Makes a noticeable difference on top of RPM tune, puts more torque down to wheels, smooths out shifts, quickly runs through gears at higher RPMS. Had it with my Dinan Elite prior and made big difference there. ALL4 had to be special ordered, but worth it,
http://mc.madnessautoworks.com/shop/...roduct_id=1884

Originally Posted by ZiaMan24 (Post 4469026)

According to their website, my car is not compatible. It looks like I will have to do a special order for mine as well.

If I'm not trying to push the car particularly hard, do you think this product is right for me? My regular driving feels ok, but when I try to push the accelerator a little bit harder in normal mode, it feels like the transmission is lugging about or has hesitation or something. When the transmission is in sport mode, everything is fine because it holds the gears longer and revs higher obviously - but it feels smoother in this mode.

Does it effect the auto start/stop? I like that the engine turns off when I'm sitting at long red lights. And does it effect other driving modes like eco?

Originally Posted by MINIMac1115 (Post 4472913)

Just installed the red grille trim today and added the black gloss bonnet emblem cover. All 6 door handles are covered. Not thrilled about the barn door handle covers. They don’t fit exactly ($30 on Amazon) and there’s some chrome that pokes through at certain angles.

Originally Posted by MINIMac1115 (Post 4472913)

Just installed the red grille trim today and added the black gloss bonnet emblem cover. All 6 door handles are covered. Not thrilled about the barn door handle covers. They don’t fit exactly ($30 on Amazon) and there’s some chrome that pokes through at certain angles.

https://cimg4.ibsrv.net/gimg/www.nor...37c65321f.jpeg
https://cimg6.ibsrv.net/gimg/www.nor...42a976a9b.jpeg
https://cimg7.ibsrv.net/gimg/www.nor...809dedc96.jpeg

Originally Posted by ECSTuning (Post 4473674)

51142465246 This is the new factory black line clubman logos. There are great for the price.

https://www.ecstuning.com/Search/Sit...h/51142465246/

https://c1552172.ssl.cf0.rackcdn.com/1333755_x800.webp


These are the new badges: 51142465240 and 51142465239

https://www.ecstuning.com/Search/Sit...54_black_line/

https://c1552172.ssl.cf0.rackcdn.com/1322340_x450.jpg

Originally Posted by ZiaMan24 (Post 4473673)

Can you provide the link for the door handle covers?
I purchased really expensive ones from OutMotoring, and their quality seems the same. I need to get a replacement for one of my barn doors, but don't want to pay so much again.

Originally Posted by ZiaMan24 (Post 4473678)

Are the "CLUBMAN" letters covers or are they supposed to replace the OEM logo?

Originally Posted by bpvk (Post 4466154)

So glad I found this forum. Here's some pics of my '17 F54 S All4. Debadged, 2.5" lift, big fat tires, remus exhaust.



https://cimg5.ibsrv.net/gimg/www.nor...f25c17477a.jpg