Installed my Pilo Intake
This is my first performance mod. Yippee!
The Pilo sounds great and improves throttle response. You can tell the engine is hungrier. :razz: Here's a pic: http://www.mini2.com/gallery/personal/16585/40210.jpg |
Did you do the cowl mod? Does yours press against the bonnet? Do you have a sound clip? :lol:
|
Looks good, countrym. :smile: I don't think mine came with that Pilo decal
on the side... (not that it matters.hehe). I too did not cut out the crowl wall behind the cone. |
Originally Posted by gravedgr
Did you do the cowl mod? Does yours press against the bonnet? Do you have a sound clip? :lol:
|
Looks really good!
|
Originally Posted by countrym
No, no, and no. I might do the cowl mod eventually. I'm a one-thing-at-a-time guy. The fit is perfect, no rubbing. And I'm too low tech for sound clip action. Sorry!
|
Originally Posted by gravedgr
No worries. I have one too and I'm just getting anxious to get it installed on the car. :lol:
One piece of advice: tilt the shield back and to the left and hook on the battery connector before you put the shield in place. The battery cable isn't long enough to hook it over the receiver after everything's screwed in place. |
countrym - mind taking a few more pics? I was almost ready to buy the alta one but when I saw yours, it looks pretty good... especially since it's cheaper than the alta, right? thanks.
|
Originally Posted by countrym
One piece of advice: .... The battery cable isn't long enough to hook it over the receiver after everything's screwed in place.
|
Here's another pic as requested:
http://www.mini2.com/gallery/personal/16585/40211.jpg And here's what it looks like before you install it: http://www.mini2.com/gallery/personal/16585/40209.jpg |
>and hook on the battery connector before you put the shield in place
aww, shucks, I thought my battery cable was just too short. I have it mounted with 3M mounting tape onto the metal bracket. :smile: Learning something new every day... |
Originally Posted by countrym
I predict you'll like it immensely. It adds a nice harmony to the supercharger's melody. :wink:
One piece of advice: tilt the shield back and to the left and hook on the battery connector before you put the shield in place. The battery cable isn't long enough to hook it over the receiver after everything's screwed in place. |
Car looks great!!. Especially since you got that awsome intake in it :grin: Hope you are enjoying it. Let me know if there is anything else that you guy's need!
|
Originally Posted by MiniPilo
Car looks great!!. Especially since you got that awsome intake in it :grin: Hope you are enjoying it. Let me know if there is anything else that you guy's need!
|
The Pilo intake was my first mod too.....which led to a Pilo ignition system.....
which led to a B&M short shifter.....which led to a Helix 15% pulley.....which led to an M7 device.....which led to non run-flat tires.....which led to Greenstuff break pads.....which led to an adjustable rear sway bar.....just to mention the performance mods. Hope you enjoy! :wink: |
All times are GMT -7. The time now is 05:00 AM. |
© 2024 MH Sub I, LLC dba Internet Brands