When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
looks like Helix has really dotted their i's and crossed their t's. Nice, some of the most comprehensive information I've seen to date from a tuner\manufacturer.
I bought one of their 2nd Gen intercoolers and was impressed with the quality and dyno numbers. I'm in for one of the new 3rd Gen DDC as of this evening. Now, if I can just forget about it for the next two months. I hate waiting.
This flow analysis was written by Albert Raczynski, a mechanical engineer at Machined Concepts. It's a very thorough review and test of good end tank design. It's long, so apologies to your screen for the data dump, but for those who are interested, it's great reading. You'll probably have to click the image and maximize to make it out.
Interesting article. I see why you went with the cast end tanks now. I'll never be able to explain it to anyone though, other than "it flows more better!"
Thanks for the link.
Mini JCW team is using Forge, should be quality product. But this Helix DDC is a very interesting product being the pioneer with different fins density.
Any intercooler expert out there to help me decide?
One of the things we have worked hardest on is the design of our end tanks. We created 6 revisions, if you include the core volume increase that we designed after testing our first prototype. We have learned that the two most important aspects of good tank design are flow and volume. The shape of the radii from ferrule to core has a huge impact on laminar smoothness, and thus intercooler efficiency. Take a look at our first iteration of the end tank, here pictured with our final version (with the greater core volume), R1 vs.R6.
R1 has basically a faceted design which is easier to render in SolidWorks, but creates turbulence inside the tank under pressure. In R6 we have aerodynamically smoothed the tanks considerably. The CFD velocity renderings confirm the increased flow and reduced turbulence.
Incidentally, look at the shape of our competitions’ tanks. They look, and no doubt flow, a lot more like R1, than R6.
The second aspect of end tank design that’s vital for reduced pressure drop is overall tank volume. This is the downfall of many intercoolers: too much volume within the tank, creating a plenum effect and promoting turbulence. Throughout our revisions, we worked very hard to reduce the volume. Remember that we, for other reasons (see my original post), increased the core volume in our second iteration. The surface area of the core at the end tank went up 65.5%. With our efforts to reduce end tank volume, our R6 iteration only increased 7.87%.
Hey everyone! My name is Ryan and I am the engineer at Helix Motorsports. Typically, I stay behind the scenes developing new products for 1st, 2nd and 3rd Gen MiINIs (I've got some interesting stuff coming down the pipeline), but I want to briefly go over some of the steps we took to ensure that our intercoolers stand alone in engineering and performance.
There are two major parts to an intercooler: the end tanks and the core. Our end tanks are computer-designed cast aluminum (see our blog for more on the design process), which we carefully inspect and manually shape when necessary, to ensure a smooth surface for airflow. If you look at the photo below, you can see how our end tanks have uniform walls with no lips or rough edges to ensure airflow enters and exits our core smoothly.
Our basic premise in designing this cooler was to get a significant, repeatable temperature drop, without having a huge loss in boost pressure as a side-effect. The core of an intercooler utilizes two sections, the charge air and the ambient air. The charge air comes from the turbos, pressurized, through the inside of the intercooler, and into the engine. The ambient air flows crosswise through the core, and as the car moves, it cools the charge air through heat exchange. To get the best heat exchange, you need maximum surface area. This is done with corrugated fins, both on the ambient side (what you see when you look at the face of the intercooler), and through the core. The smaller and denser the fins are, the better heat exchange you get. Unfortunately, it's not quite that easy. There are two negatives with high fin density: it's expensive and it reduces boost pressure, like an aerodynamic drag on the charge. To balance cooling efficiency with pressure drop, we decided to use two different fin densities. The ambient side has a very high fin density, where the charge side has lower density. The Dual Density core helps ensure there is minimal pressure drop through the core while maintaining maximum cooling efficiency.
When designing this intercooler, I wanted to minimize the overall complexity of the mounting tabs without compromising strength. The OEM design had extra bracing and supports due to the plastic material used. Our aluminum end tanks have much greater strength and additional bracing was not needed. Not only does this save weight, but it allows for an easier casting and installation process.
For our 3rd Gen Mini intercoolers, we decided to go with non-polished end tanks. While the polished tanks are shiny, there is less surface area, so it actually has a slight negative effect on heat exchange. With any type of thermal exchange system, surface area is key in maximizing the efficiency of heat exchange. Turbulent airflow actually helps increase heat exchange efficiency and having a slightly rough surface will help aid in thermal transfer. You can read more about how turbulent airflow aids in forced convection scenarios here (Bahrami, M. Forced Convection. SFU). Although the end tanks are just a fraction of the total heat exchange, we decided to go for maximum performance over shiny tanks.
You can place your order for a Helix 3rd Gen Mini DDC Intercooler here.
If you have any questions please let us know by sending us an email at sales@helix13.com or by calling us at 267-335-4337.
03-01-2016, 03:17 PM
