**The OFFICIAL THREAD** for Bytetronik FullAccess Tuning Kit - R50/R52/R53
8 Attachment(s)
The Bytetronik FullAccess (FA53) Tuning Kit is a comprehensive tuning solution for the MINI R50/52/53 owners, providing owner the capability to fully adjust the mappings inside their stock ECUs. The FA Kit contains both hardware and software components to perform the following:
*Unique = This feature only works in the ECU in which FA has been loaded. **Universal = This feature works on all R50/R52/R53 (So customer with FA can clear the Trouble Codes and Adaptation values for their buddy's R53, eventhough their buddy's ECU does not have FA loaded). ================================================== Hardware: The MINIport OBD-2 device plugs directly to the vehicle's OBD port and enables the FA Software to communicate directly with the car's ECU.Hardware and Software Specifications: Attachment 171318
Attachment 171319 Innovate 2.5mm Serial cable (Part #3812) - transfers data from the MTX-L AFR Kit to the MINIPort for AFR Logging: Attachment 171320 Innovate 2.5mm Serial cable (Part #3789) - transfers data from the LC-1 AFR Kit to the MINIPort for AFR Logging Attachment 171321 Software: The FullAccess (FA53) software is a Bytetronik proprietary software designed specifically for the MINI R53 platform. It’s about 10MB in size and can easily be installed on any Windows Platform (Windows 2000 or newer with a minimum of 512MB of RAM). The FA53 has an easy to use GUI for user to easily navigate through the various levels of tasks and commands, and when connected to the MINIport, it allows users to flash and configure their ECUs. FullAccess Software Graphic User Interface (GUI)!!! http://www.bytetronik.com/fa-sft2.jpg http://i63.servimg.com/u/f63/13/73/96/67/screen11.jpg A) Installing FullAccess onto ECU (On the intial Installation on a new ECU - only need to do this one time): Initial Installation Time: ~ 9 Minutes Saves Stock Rom (512kb): Yes Saves the Stock Tune (64kb): Yes B) Change Map (Flashing a map into the ECU): ~ 35 to 45 Seconds (Depending on PC Performance) C) Uninstalling FA53 (Returning ECU back to Stock): ~ 5 minutes ================================================== ================ Data Logging = 45+ Channels Being Recorded by FullAccess:
================================================== ================ With this Tuning Kit, you have complete control over your ecu so you are not limited by anyone or tied down to any particular tuner. So here are your options:Who Can Tune your ECU?
================================================== ================ Warranty and Support: FA Software support => entitles the customer/dealer with unlimited support with the operations of the FA hardware and software and FREE unlimited future releases. ================================================== ================FA Hardware support => One (1) Year Warranty on the MINIPort from mfg defects. Dealers and Support Network: (These dealers will be able to provide support and products in your area) USA: (via website or through our dealers)
U.K: Japan:
================================================== ================ ***WARNING*** The FullAccess Tuning Kit is a Proprietary Tuning Software licensed to be used by the buyer/purchaser. Any tampering of the FA software or hardware will void support from Bytetronik and our dealers. These unauthorized access include the following:
***WARNING*** |
Pricing and Capabilities of FA53
4 Attachment(s)
FA Package Pricing and Support Levels:
Attachment 171322 This is how the DataViewer displays the selected channels. In this example, we displayed the Short Term Mixture, Short Term Correction, O2 Sensor Pre-CAT and Fuel Injector Pulse: Attachment 171323 FA Logs are also compatible with Vitural Dyno Software: Graph your BEFORE and AFTER logs and see the Delta without needing a dyno. Attachment 171324 DataViewer's Play-Back function in action: OBD2 Extension Cable: This little gizmo has a 90-degree connector to your OBD port and is invaluable. We use it more time than you care to count. You can safely relocate your OBD Port to a much friendlier location inside your MINI (NOTE: for the initial loading of FullAccess into your ECU, plug DIRECTLY to your OBD2 Port). Use this extension cable for data-logging and reflash operations ONLY. Attachment 171325 As has been previously mentioned, the FA Tuning Kit is a tool - A Very Powerful Tool!!! The analogy I can think of is the purchasing of a firearm; in the right hands, this could be a life-saving tool. But if it's mishandled, you can cause great damage with it. If you're not sure what to do, ask questions. We have a Tech Support Forum designed specifically for this. If you don't want to tune your MINI and don't have anyone to turn to, think about subscribing to our Level II Support - Custom Remote Mapping. ----------------------------------------------------- Level I Support: General Software/Hardware support (Free to all FA customers):
================================================== == With FA53, these are some of the accomplisments that have been achieved:
|
FAQ Section.
11 Attachment(s)
***WARNING: FullAccess Tuning Software only allows users to edit and upload maps inside the R53 ecu - it does NOT tune for you or teach you how to tune... to become a better tuner, you will need lots of reading and perhaps some ecu tuning classes. ***WARNING: DEMO Video for FA53: (General operations & Clearing Fault Code) DEMO Video #2: Map adjusments, saving changes, reflashing tune. ==============FAQ SECTION============
=============================================== ***Data Logger FAQ*** D1. How do I Data Log my MINI? Answer: Just plug the MINIPort into your OBD2 port. When you see the rainbow lights blinking rapidly then the Logger is working and writing to the MicroSD card.D2. How do i retrieve the log from my MicroSD card? Answer: As soon as you plug in the mini-USB cable to MINIPort, the lights turn solid color and MINIPort is now a storage device. It will show up on your PC as a "removable storage device."D3. How long should i log? Answer: It's best to do relatively small logs so you can analyse it more easily. Larger logs will contain more info, but it will also mean a lot more stuff to scroll through to find what you're actully looking to log. D4. Can i keep the MINIPort plugged in to the OBD2 port all the time? Answer: Yes, but this practice is not recommended for two reasons: 1) Your OBD Port is ALWAYS HOT, thus the MINIPort will always be on; this in turn will drain the car's battery; 2) When the MINIPort is kept powered on, it will still log a bunch of "0000000000"... this will make your log file grow while not providing any meaningful data. D5. So what's the best way to log? Answer: Decide what is it that you'd like to log... if you want to log start-up parameters, then plug in the MINIPort to OBD port before you put the key in the ignition. If you want to log cruising speed, then plug it in while you're driving on the freeway. D6. How do i break up the logs to make them smaller? Answer: When you physically disconnect MINIPort from the OBD Port, this disruption of power will put a cap to the current logging session. The next time you plug it into the OBD port, then it will automatically create a new log for the current session. D7. How do i know which one is the most recent? Answer: The most recent log is the one with the highest numeric number (Log10.csv is newer than Log9.csv). D8. Should I remove the SD card from the MINIPort and retrieve the logs? Answer: NO. The SD card is designed to be a permanent component of the MINIPort. It's NOT designed to be a removal storage. If you need to retrieve the logs from the SD card, simply connect the USB cable to the MINIPort and you will be able to retrieve the log quite easily. =============== ECU Tutorial 101 ================= Attachment 171327 Attachment 171328 Attachment 171329 Attachment 171330 Attachment 171331 Attachment 171331 Attachment 171333 Attachment 171334 Attachment 171335 Attachment 171336 |
Newer version of FA (with updated map list)
We are working on a Newer Release of FA53 (Finalizing it as we speak). Here are some of the maps that we are adding with this update.
NOTE: Some software numbers will have more new maps than others. If you update your software # to the latest update from BMW/MINI, then these newer maps will be visible to your FA. http://i43.servimg.com/u/f43/13/73/96/67/screen34.jpg http://i43.servimg.com/u/f43/13/73/96/67/screen35.jpg http://i43.servimg.com/u/f43/13/73/96/67/screen36.jpg http://i43.servimg.com/u/f43/13/73/96/67/screen37.jpg http://i43.servimg.com/u/f43/13/73/96/67/screen38.jpg http://i43.servimg.com/u/f43/13/73/96/67/screen39.jpg |
We have just released FA53 Version 3580 on the Tech Forum. Current FA owners can sign on and download this version :)
|
***New Feature Added for FA53 and FA-LITE (non-CARB version) Customer***
Symptoms: For FA customers who wants extra-sensitive throttle responses (and instant torque the moment the gas pedal is depressed) but couldn't do so b/c it was triggering LIMP Mode, we have found a solution for this. In typical Limp Mode fashing, the ECU would kick into safe mode (generating a DTC) and prevent the car from reving pass 2500 RPM. Solution #1 - "Soft By-pass": the CEL Light would come on but LIMP Mode is disabled... and the CEL will disappear after you cycle the key (no DTC is generated). In this mode, DTC is triggered but NOT logged - LIMP Mode is disabled. Solution #2 - "Complete Disable" (Recommened for Track MINIs ONLY) => This would completely disable the CEL as and LIMP Mode (no DTC is generated). ***Recommended for Track MINI ONLY*** but it's available to FA customers who subscribe to our CRM Tuning service. |
Launch Control Feature added (see our Tech Forum for the parameters):
https://www.northamericanmotoring.co...ml#post3676958 |
FA53 back in stock... go to our website for more details...
|
Limited Special!!!
***Limited SPECIAL Offer*** FA53 (Self-tuning) Kit + one set of Bosch 550cc Injectors = $850 shipped for CONTI-USA. ***Limited SPECIAL Offer*** |
How to reset your FA53 Self-Tuning Kit for resell...
The procedure as follows for the Resetting of your FA53 Self-Tuning Kit so it can be resold to be used on another R53:
Regards, BT Support Team. |
2015 Year-end Package Deal!!!
***2015 Year-end Package Deal*** ***2015 Year-end Package Deal*** |
For 2016, we are now offering Dealer Kits with attractive pricing. PM for additional info. BT Team.
|
FA Year End Package Sale!!!
We are currently offering two FA53 Packages for the R53:
|
All times are GMT -7. The time now is 12:42 PM. |
© 2024 MH Sub I, LLC dba Internet Brands