North American Motoring - Brembo's and R-90's

North American Motoring (https://www.northamericanmotoring.com/forums/)

- Tires, Wheels, & Brakes (https://www.northamericanmotoring.com/forums/tires-wheels-and-brakes-36/)

- - Brembo's and R-90's (https://www.northamericanmotoring.com/forums/tires-wheels-and-brakes/87246-brembos-and-r-90s.html)

tjmarrone

Dec 19, 2006 02:36 PM

Brembo's and R-90's

Anyone running a Brembo BBK with R-90 rims? Are spacers required and if so how thick? Lastly, where would you recommend to buy spacers and of what material?

Thanks, T. J.

JCW Driver

Dec 21, 2006 07:27 PM

I doubt it will fit, but I could not say for sure. My S-lites took 20 mil spacers. :eek2:

H&R makes a good spacer. Trax is the model

http://www.hrsprings.com/site/index.html

Quote:

TRAK+ Wheel Spacers:

Kit DR 5mm 1024562 $ 49.95
Kit DR 15mm 3024562 $ 95.00
Kit DR 20mm 4024562 $ 99.95
Kit DRA 25mm 5024562 $ 149.95
Kit DRA 30mm 6024562 $ 179.95 Kit

dkstone

Dec 21, 2006 09:40 PM

Quote:

Originally Posted by tjmarrone (Post 1278316)

Anyone running a Brembo BBK with R-90 rims? Are spacers required and if so how thick? Lastly, where would you recommend to buy spacers and of what material?

Thanks, T. J.

Will require 10mm per wheel, 10mm are hard to come by since most only carry 5mm, 15mm, 20mm and so on, so buy 2 10mm spacer kits from Turner each kit has 2 5mm spacers from H&R, that is what I have been using for the past 3 years

JCW Driver

Dec 21, 2006 10:16 PM

If you can get away with 8mm, there is option. Mini-Madness (George) sells 8mm, in addition to the 15 and 5. You should have a 2-3mm gap between the wheel spoke and the caliper, at a minimum. Less than that can cause problems as the wheels deflect under load.

http://www.mini-madness.com/index.as...ROD&ProdID=132

http://www.mini-madness.com/ProductI...el-spacers.jpg

All times are GMT -7. The time now is 11:49 PM.