MINI Spinners!
#1
MINI Spinners!
36122469709
We now have MINI Floating Logo (like Rolls Royce) Center Caps. These are for the F54-F60 Cars that take the normal center cap with exposed lugs. We even tested it to fit on Team Dynamics wheels also.
We had a video on IG of the spinning of the caps, but IG is down and not working right now.
https://www.ecstuning.com/b-genuine-...d/36122469709/
Like this but for MINI:
They have a video now:
We now have MINI Floating Logo (like Rolls Royce) Center Caps. These are for the F54-F60 Cars that take the normal center cap with exposed lugs. We even tested it to fit on Team Dynamics wheels also.
We had a video on IG of the spinning of the caps, but IG is down and not working right now.
https://www.ecstuning.com/b-genuine-...d/36122469709/
Like this but for MINI:
They have a video now:
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Last edited by ECSTuning; 02-06-2020 at 11:13 AM.
The following users liked this post:
ArchiMark (08-24-2019)
#4
JCW ones are on back order. When they come in we will let you know. These are genuine MINI, they dont fit the older Gen 1 and Gen 2 wheels unless you run team dynamic wheels. I talked to MINI and they are not making the older JCW logo design in anything new :(
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#5
Looks like the https://www.ecstuning.com/b-genuine-...h/36136786764/ will fit over the floating versions above as they are 50mm is you cannot wait for the Back ordered official JCW ones.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#6
Back in stock
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#7
Just an update we have the JCW ones now! 36122469710
https://www.ecstuning.com/b-genuine-...d/36122469710/
https://www.ecstuning.com/b-genuine-...d/36122469710/
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Trending Topics
#8
Back in stock!
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#10
Yes, I tried them on my R58's team dynamic wheels. Snaps in.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#11
Amazing! Any chance I could get a picture of this? I’d love to see what they look like. I saw another post on forum where a user said their normal F56 JCW caps didn’t fit their TD wheels. If they do fit I’m excited! The caps are really the only reason i haven’t pulled the trigger on these wheels yet.
#12
Give me some time and I will snap a pic.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#14
Added the video to the top^^ for the OEM wheels of them in action.
I tried them again as when these came out we tested them and they fit pretty snug on the Team Dynamics Wheels. Now they are a hair loose, so MINI must have changed the original design and made them easier to get off the oem MINI F54-F60 MINI wheels with 5x112 bolt pattern.
They snap in but move like a hair around. I bet with some electrical tape wound around the tabs a couple times they would stay in.
Look good installed. When I tilled the Team Dynamics wheel they stayed in but have a little gap.
Tilted forward.
I tried them again as when these came out we tested them and they fit pretty snug on the Team Dynamics Wheels. Now they are a hair loose, so MINI must have changed the original design and made them easier to get off the oem MINI F54-F60 MINI wheels with 5x112 bolt pattern.
They snap in but move like a hair around. I bet with some electrical tape wound around the tabs a couple times they would stay in.
Look good installed. When I tilled the Team Dynamics wheel they stayed in but have a little gap.
Tilted forward.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Last edited by ECSTuning; 02-06-2020 at 11:14 AM.
#16
Yep, welcome.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#18
They do not. Just F54-F60 factory wheels with the exposed lugs. Or any aftermarket wheel that has the same size cap as the F54-F60 factory wheels.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#19
I might use this as an excuse to pick up some nice TD wheels but I actually really like the 19" JCW wheels we have. What a bummer!
#20
Yep, if we here anything for the old platform MINIs we will let you know.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
The following users liked this post:
MiniAndo (03-27-2020)
#22
According my research these are 56mm...
https://shop.mini.co.uk/mini-uk/en_G...-4/PID_647776/
5minutes earlier i measured my cousins R56 cooper with stock wheel.
https://www.team-bhp.com/carpics/Min...-cooper-09.jpg
I measured this caps and the cestercup hole is 56mm..
So why doesnt fit?
Whats wrong with that?
https://shop.mini.co.uk/mini-uk/en_G...-4/PID_647776/
5minutes earlier i measured my cousins R56 cooper with stock wheel.
https://www.team-bhp.com/carpics/Min...-cooper-09.jpg
I measured this caps and the cestercup hole is 56mm..
So why doesnt fit?
Whats wrong with that?
The following users liked this post:
hoonu (05-29-2023)
#23
These are for the F56+ wheels https://www.ecstuning.com/Search/Sit...h/36122469710/
Fit the team dynamics just barely but will not fit the R50-R61 Wheels.
Fit the team dynamics just barely but will not fit the R50-R61 Wheels.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Thread
Thread Starter
Forum
Replies
Last Post
Eurothrasher
MINI Parts for Sale
3
07-24-2016 07:28 AM
Eurothrasher
MINI Parts for Sale
30
03-30-2016 07:45 AM