2013 unknown manual drivetrain issue - North American Motoring

Go Back  North American Motoring > 2nd Generation MINIs > Stock Problems/Issues
2013 unknown manual drivetrain issue >

2013 unknown manual drivetrain issue

Stock Problems/Issues Discussions related to warranty related issues and repairs, or other problems with the OEM parts and software for MINI Clubman (R55), Cooper and Cooper S(R56), and Cabrio (R57).

2013 unknown manual drivetrain issue


Old 04-04-2018, 02:10 PM
mel64 is offline
Thread Starter
Join Date: Apr 2018
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
2013 unknown manual drivetrain issue

First timer here looking for answers. 2013 R55 S 6-spd "free revs" with N18. Thinking it was clutch related I had clutch, pressure plate, flywheel bolts and metal sleeve all replaced. Mechanic had 38 yrs of experience. MINI will not engage/accelerate after 30+ minutes but after it cools down (heat related some how? - no smells) I can engage clutch/drivetrain and it'll move. Dual mass clutch seems to be holding together per mechanic. Don't know what to ask outlook for at this point. Fluids looked really clean. Nearest MINI dealer is NIW 2+ hours away. Any suggestions would be greatly appreciated.
Reply With Quote
Old 04-16-2018, 06:06 AM
MiniToBe is offline
6th Gear
iTrader: (2)
Join Date: Jan 2015
Location: Philadelphia PA
Posts: 2,446
Thanked 122 Times in 118 Posts
give it back to the mechanic who did the work and let them fix it. 38yr of experience and doesnt know? (why use this card to lure customers and then say, "oh, mini is different")

any how, when you say after it warms up it wont engage, can you elaborate?
do you mean to say it goes into gear but wont move? or it wont go into gear like something is blocking it?
Reply With Quote
Old 04-17-2018, 05:49 PM
sawicki is offline
2nd Gear
Join Date: Mar 2018
Location: Western Mass
Posts: 70
Thanks: 0
Thanked 8 Times in 8 Posts
Could be output shaft but if that was the case heat soak wouldnt matter. Manual transmissions are pretty basic. Try getting the front end off the ground and see if it still free revs.
Reply With Quote
Old 04-18-2018, 06:38 AM
mel64 is offline
Thread Starter
Join Date: Apr 2018
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
I meant to say it won't move, never an issue with engagement. I've heard only the N18 motor takes a special tool to "pre-load" the self-adjusting pressure plate. I also noticed on the old pressure plate there is what appeared to be a star shaped adjustment wheel similar to what was on the old drum brakes. This condition happened before replacement, hence the replacement but continues after also. The car was bought used, if the previous owner had it replaced and didn't use this special $335 tool what would the byproduct be? What does this tool and adjustment wheel actually do? To me, this seems to be the issue but not even a MINI dealer can/will tell me and MINIUSA is of no help, not us MINI of Birmingham, AL.
Reply With Quote
Related Topics
Thread Starter
Last Post
Philip Rushing
R50/R53 :: Hatch Talk (2002-2006)
08-28-2007 09:08 AM
R56 :: Hatch Talk (2007+)
06-05-2007 09:38 AM
General MINI Talk
03-07-2007 07:50 PM
Tires, Wheels, & Brakes
01-27-2006 05:44 PM
08-27-2003 11:53 PM

Forum Jump

Thread Tools
Search this Thread
  • Ask a Question
    Get answers from community experts
Question Title:
Your question will be posted in: