North American Motoring

North American Motoring (https://www.northamericanmotoring.com/forums/)
-   Stock Problems/Issues (https://www.northamericanmotoring.com/forums/stock-problems-issues-9/)
-   -   Won't shift into 2nd, 4th or 6th (https://www.northamericanmotoring.com/forums/stock-problems-issues/155119-wont-shift-into-2nd-4th-or-6th.html)

thejamesgang Sep 28, 2008 09:24 AM

Won't shift into 2nd, 4th or 6th
 
Wife's '03 MCS, built May 2003.

Recently started having issues shifting into the bottom gears on the range. Used to feel one notch and then going into gear, now if you don't pull hard you'll grind it and miss. It feels like there isn't enough shifter throw, almost like something is stopping it from going all the way down.

Found out during searching that there was a TSB for frozen shift cables (which the car has always had during the winter) but didn't know it could be fixed before the warranty runs out. There's 61K on the odometer.

I also read about this possibly being a clutch issue, I have positive engagement about halfway up from the floor and have never had any other troubles with it.

Any thoughts?

Thanks
Josh

k-huevo Sep 28, 2008 10:33 AM

Shifter cables don’t last forever it’s true and yours sound sticky since there is a noticeable difference in the cold, but first look at the clutch slave for leaks; if none can be seen externally, pull back the plunger dust boot. Also, if the slave has never been bled, give that a try.

thejamesgang Sep 29, 2008 07:38 AM

Why would the clutch slave have something to do with only going into 3 gears?

If the clutch is disengaging in 1st, 3rd, and 5th, it would be reasonable to assume that it's doing the same for the other 3 gears, wouldn't it?

Warped1966 Sep 29, 2008 01:47 PM

I would suspect that the shift cable is out of adjustment. With the car NOT running have someone try to put it into 1st, 3rd and 5th. Watch where the shifter cables attach to a linkage at the transmission. It will be very apparent which one is the correct cable. There should be some sort of adjustment. Experiment! If the cable is broken, get a new one. Good luck!

jhiggs26 Sep 29, 2008 08:02 PM

Sounds like shift cable problem Josh.

See pics below for shift cable actuation of gearbox. My money is on a problem with your right cable!

Jeremy

Neutral.
http://photos-b.ak.facebook.com/phot...59465_8082.jpg
1st Gear.
http://photos-c.ak.facebook.com/phot...59466_8403.jpg
2nd Gear.
http://photos-d.ak.facebook.com/phot...59467_8680.jpg
3rd Gear.
http://photos-e.ak.facebook.com/phot...59468_8964.jpg
4th Gear.
http://photos-f.ak.facebook.com/phot...59469_9251.jpg
5th Gear.
http://photos-g.ak.facebook.com/phot...59470_9539.jpg
6th Gear.
http://photos-h.ak.facebook.com/phot...59471_9830.jpg
Reverse Gear.
http://photos-a.ak.facebook.com/phot...859472_128.jpg

tony2004s Aug 18, 2016 11:26 AM

Do you know why pics are not opening? I have this same exact problem on my mini cooper it won't shift into bottom gears. thanks

ZippyNH Aug 18, 2016 11:34 AM

Links are from a poster from 2008....
Very old threads start to get less useful....
But it sounds like you found some good info that you can use to get your car fixed.

Tim H (WarDoc) Aug 18, 2016 11:35 AM


Originally Posted by tony2004s (Post 4236010)
Do you know why pics are not opening?

Really old thread with the pics hosted on a external website that no longer appear to be there.


All times are GMT -7. The time now is 10:26 PM.


© 2026 MH Sub I, LLC dba Internet Brands