R56 service / brake lights etc reset procedure
Posted by ONED on MINI2
OK Folks the info you have all been waiting for - sorry it took so long to compile - but have managed to get round all those R56 service light resets. The main one people are asking for is the Brake indicator reset after changing pads and fitting a new sensor, but the procedure is the same for all service indicator resets.;) Please do not reset any of your service lights if you have TLC cover for this work. I take no responsibility for how this info may be used!:rolleyes: Anyway...... To enter the service Menu: Insert Key Do not press clutch / brake Press Start button Wait until the Car / revelant Service symbol disappears on the Rev counter display Immediately after the symbol goes out - Press and hold Both buttons on the Rev Counter Continue to hold - the system Will run a dash light check:cool::rolleyes: Continue to hold Display will then show VIN / Menu, - continue to hold through this until the time Reappears on the display. Now release Only the Right hand Button (trip reset) for about a second, and then press and hold again (whilst still holding the LH button) After another second of 2 the display will show the Front Brake Symbol You Are Now in the Service Menu:D Use the BC Button (on indicator stalk) to scroll through to the relevant symbol - eg Rear Brakes To Reset the warning indicator light - Press & Hold the BC Button at the revelant symbol until RESET appears - then press and hold again until the process is complete. Turn Off and On the Ignition again - Warning should now have gone!;) Good Luck ! Mods can you please add a copy of this Info to the FAQ & DIY Section, and can you also Sticky this? |
WOW,!!!!, That is fantastic info for us DIYs, Thanks.:nod: :thumbsup: (I will recommend that it be made a STICKEY )
|
sorry, but what is 'TLC cover', do you mean the regular service plan?
|
Thanks!
|
I did this just to watch the guages swoop! Co0L!!
|
Good stuff.... !!
|
That rocks! This car is more and more like a video game every day. The above reminds me of entering the left-left-right-right-up-down-up-down-B-A-Start code on Contra/Life Force :D
|
Twister,
A BIG Thanks! You saved me half a day to take it into the dealership just to have them reset it (and possibly even charging me) after I had all ready done all the work. Great post! |
Thanks Twister. Another happy customer!
|
Yes indeed, thank you VERY much Twister, another happy customer here as well! (who thinks of these silly code sequences??!)
now to go on a search to see how to reset the low washer fluid indicator :roll: |
"now to go on a search to see how to reset the low washer fluid indicator "
This is one of the easiest resets around: take a quart of washer fluid and put it in the reservoir. Not only does this reset the light, it allows you to clean the glass without exiting the car. (At least I assume it resets the light...I've never had mine go on, heh, heh). |
Haa! You would think! But alas, the reservoir is full and yet the warning light remains :(
|
Yoiks!
A trip to the dealer when you need washer fluid? Yoiks! |
I take some pictures to be more helpfull this DIY
To enter the service Menu: Insert Key (Do not press clutch / brake) Press Start button https://www.northamericanmotoring.co....jpg%5B/IMG%5Dhttp://img151.imageshack.us/img151/8...0816575451.jpg Wait until the Car / revelant Service symbol disappears on the Rev counter displayImmediately after the symbol goes out - Press and hold Both buttons on the Rev Counter http://img144.imageshack.us/img144/2...0846595349.jpgContinue to hold - the system Will run a dash light check. http://img7.imageshack.us/img7/6776/dsc000886677461.jpg http://img5.imageshack.us/img5/7065/dsc000896697655.jpg Continue to hold. Display will then show VIN / Menu, http://img151.imageshack.us/img151/1...0866637914.jpg Continue to hold through this until the time Reappears on the display.Now release Only the Right hand Button (trip reset) for about a second, and then press and hold again (whilst still holding the LH button) After another second of 2 the display will show the Front Brake Symbol You Are Now in the Service Menu.Use the BC Button (on indicator stalk) to scroll through to the relevant symbol - eg Rear BrakesTo Reset the warning indicator light - Press & Hold the BC Button at the revelant symbol until RESET appears - then press and hold again until the process is complete.Turn Off and On the Ignition again - Warning should now have gone!;) |
I have the Rear Brake Pad light on.
http://img5.imageshack.us/img5/676/dsc000926757528.jpg I tried to reset it with this DYI but I can't. I tryed to do it with the Front Brake and nothing. So I reset a simbol that looks like this: (O). Front Brakes Reset Ok, but rear it is impossible.... Any suggestion???? |
ummm, i dont think it works on a 08 up mini, does it???? i just tried it and it goes through the gauges check and then it goes back into the normal exclamation mark ..no VIN nowhere :(
|
Originally Posted by Argencooper
(Post 2740753)
I have the Rear Brake Pad light on.
http://img5.imageshack.us/img5/676/dsc000926757528.jpg I tried to reset it with this DYI but I can't. I tried to do it with the front brake and nothing. So I reset a symbol that looks like this: (O). Front Brakes Reset Ok, but rear it is impossible.... Any suggestion???? |
Originally Posted by MiniPOLACK
(Post 2767698)
ummm, i dont think it works on a 08 up mini, does it???? i just tried it and it goes through the gauges check and then it goes back into the normal exclamation mark ..no VIN nowhere :(
|
in the instruction it says to continue holding both buttons until VIN appears.
|
Originally Posted by MiniPOLACK
(Post 2768337)
in the instruction it says to continue holding both buttons until VIN appears.
|
damn it.... still no luck ....wth is wrong with my car...funny thing is i tried the same thing on my friends 07 and other 08 models ( 3 cars total) and had no luck getting that VIN on...when i put the key into ignition and press start i have that huge exclamation mark on and it doesnt want to disappear , i waited the longest like 5mins
|
Originally Posted by MiniPOLACK
(Post 2768462)
damn it.... still no luck ....wth is wrong with my car...funny thing is i tried the same thing on my friends 07 and other 08 models ( 3 cars total) and had no luck getting that VIN on...when i put the key into ignition and press start i have that huge exclamation mark on and it doesnt want to disappear , i waited the longest like 5mins
|
LLOOOLLLLLL i just choked on my food........somebody edit the procedure please .....open door was the problem ...LOL
thank you a million Oxy..i hope God will reward you with plenty of children :P |
Originally Posted by MiniPOLACK
(Post 2768472)
i hope God will reward you with plenty of children :P
|
hmmm... ok so i reseted everything possible, or so i thought...i still have that dreaded "service" light on every time i start the car, what gives?
|
All times are GMT -7. The time now is 06:42 PM. |
© 2024 MH Sub I, LLC dba Internet Brands