North American Motoring

North American Motoring (https://www.northamericanmotoring.com/forums/)
-   Stock Problems/Issues (https://www.northamericanmotoring.com/forums/stock-problems-issues-9/)
-   -   who rebuilds mini's rack+pinion steering (https://www.northamericanmotoring.com/forums/stock-problems-issues/111979-who-rebuilds-minis-rack-pinion-steering.html)

tikka1969 Aug 26, 2007 12:16 PM

who rebuilds mini's rack+pinion steering
 
saw a post here about someone that rebuilds the rack and pinions on the mini's.he also chrom plates the area where the seal sits to prevent it from leaking.sombody has to have seen this.please help.the search feature on the site is not helping at all.

AnnJones Aug 26, 2007 04:41 PM

Steering rack
 
A week or two After driving thru water deeper than I would like, my boots filled with P S fluid.

Had a local shop inspect it. Their verdict, rust on the shaft had destroyed the inner seals.

Rather than pay Mini $900 to replace the power steering rack with a stock unit, the shop removed the rack and sent it off to Chicago If I remember correctly.
The place they sent it to hard chromed the shaft, remachined it. installed new seals, and returned it to local shop. It only took a week using overnight shipping. It has been fine ever since. Doing this was not much more money than what the dealer wanted.
I got rained on last week and now the power windows stopped working. LOL!

I will look to see if I have any info on the facility that did the rebuild....

Ann

tikka1969 Aug 27, 2007 03:35 AM

yep that's it.thanks Ann.you know,i to drove thrue water.yes a little deep.but i dought that is the exact cause.it was probabily corroding before the seal was installed.another design flaw.oh,how maney miles do you have on it when the rack started leaking .the dealer would not tell me what he could do for me untill they inspected it(to make sure that i didn't do anything to it and make sure it was in for regular service bla bla bla) and that i pay a 125.00 inspection fee.can't say i felt very trusting after my conversation with him.i wonder if your conversation the same mine did(with the dealer)thanks again. Mike

Mpower510 Mar 28, 2010 07:46 PM

Anybody know of the place that works on rack's & pinions?

Thanks


All times are GMT -7. The time now is 08:57 PM.


© 2026 MH Sub I, LLC dba Internet Brands