Category: Wheels & Tires
Price: $200
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): R50, R52, R53, R55, R56, R57, R58, R59, R60
Location (Region): Midwestern
Item Condition: Used

Selling a set of four Mini-specific adapters made by Adaptec. 4x100 to 5x112. Good for Mercedes and Audi wheels, along with all aftermarket 5x112. Two 25mm and two 30mm thick. Lug AND hubcentric. These adapters also adapt the center bore to 66.56, perfect for the majority of 5x112 wheels, however could still be machined down for a smaller centerbore.

Includes all pieces needed, everything in great condition, ready to install. Asking $200 shipped. Adaptec charges $375 + shipping for any set of adapters they make. Also comes with lifetime warranty. Happy to answer any questions, just PM me. Thanks!

 

bump. Shoot me an offer if interested!

 

Hello, do you still have the adapters and are they the same as the following:

https://cimg5.ibsrv.net/gimg/www.nor...4e6138485c.jpg

https://www.northamericanmotoring.co...dest-look.html

I purchased the 2nd set of BBS's from Jacob and looking to get them mounted. Check out his post and tell me if they will fit, thanx

 

Your adapters are 5x114.3, these are 5x112 so unfortunately no they are not going to be the same unless your second set of BBS's are 5x112.

 

i see these have a hubring on them for the 5-112 wheel, but what about on the inside. these dont need a hubcentric ring for the "mini" hub which is 56.1 to fit snug? I never understood these adapters so that's why im asking.

 

If you look on the back side of the adapters, you'll see its simply flat with the hub hole. This hole diameter is 56.1, so will fit as snug as possible without a hub ring. Then on the front side, that hub hole now has a flange around it, thus requiring the aftermarket 5x112 wheel to have a larger hub. In this case, 66.6 because that's what the majority of 5x112 wheels have for a hub bore.

 

PM sent

 

Hi, are the adapters still available? If not, can you tell me where you bought the adapters at because I wanna run some 5x112 wheels I have on my R56.

 

I know this is a long shot but are the adapters still available?

 

Three year old thread. Most likely not. They aren't hard to find from a google search. Good luck.