FS:: 2005 R52 Cooper S Convertible in WV
#1
2005 R52 Cooper S Convertible in WV
Year: 2005
Make: MINI
Model: Convertible
Price: $6500
Mileage: 55000
Color: Blue
Private or Dealer Listing: Private Listing
Location (Region): NorthEast
We've put about 5000 miles on the car.
After replacing the harmonic balancer, I thought I would be done for awhile with the repairs. Before parking the car (in our garage) for the winter, the convertible top decided to stop opening. It's a common problem but I'm not sure I want to invest the time to repair it myself.
So, I'm offering the car for sale in Charleston, WV. I have all the service records from the prior owner.
#2
What are the last 7 of the Vin? This will allow people to check the build specs of the car. Any other issues outside of the top?
Thanks, Jim
Thanks, Jim
The following users liked this post:
barry304 (01-15-2018)
#4
Looks great and it looks like a great price.
Before you throw in the towel, check in the trunk to make sure that the latches to lock down the top are in tight and that the parcel shelf is down and installed correctly. I saw a YouTube video on this and a few days later, I could not open mine. Two minutes in a parking lot and I was able to get it working.
Before you throw in the towel, check in the trunk to make sure that the latches to lock down the top are in tight and that the parcel shelf is down and installed correctly. I saw a YouTube video on this and a few days later, I could not open mine. Two minutes in a parking lot and I was able to get it working.
The following users liked this post:
barry304 (01-15-2018)
#6
Thanks everyone for the comments. Here is the VIN for the car:
WMWRH33455TF81954
The symptom I experience with the top isn't that the motor doesn't work, but that only one side pulls away from the A pillar. Would that be the same symptom if the latches weren't secure?
Currently, the passenger airbag light is on. Also, there was an aftermarket LED RPM meter on the dash that doesn't work even though it gets power (it looked like a factory install).
These additional pictures aren't the best. Sorry.
Great info,
Barry
WMWRH33455TF81954
The symptom I experience with the top isn't that the motor doesn't work, but that only one side pulls away from the A pillar. Would that be the same symptom if the latches weren't secure?
Currently, the passenger airbag light is on. Also, there was an aftermarket LED RPM meter on the dash that doesn't work even though it gets power (it looked like a factory install).
These additional pictures aren't the best. Sorry.
Great info,
Barry
Last edited by barry304; 01-15-2018 at 07:44 PM. Reason: Adding some pictures
#7
Allot depends on how handy you are with a wrench. The ECS guy is a Vert owner and will hopefully chime in here.
The following users liked this post:
ECSTuning (01-22-2018)
Trending Topics
#8
The RPM meter looks like the rare factory JCW accessory, not aftermarket. It's interesting the car also has a factory cup holder base on the drivers side downtube. Did it still have the cupholder attached when you got the car?
Looks like it has a body colored factory aero kit, too.
Looks like it has a body colored factory aero kit, too.
#10
Also Illuminated SILL COVERS!!!!!
#11
Not to seem opportunistic, but I'd be happy to sell the seller/buyer convertible cables for a very reasonable price. Hopefully this helps the sale.
If one side is retracting, that sounds like a broken cable, which are very expensive new. Its not a challenging repair if you're halfway handy.. there are youtube videos for help.
If one side is retracting, that sounds like a broken cable, which are very expensive new. Its not a challenging repair if you're halfway handy.. there are youtube videos for help.
The following users liked this post:
gsfent (01-18-2018)
#12
I wonder if those odd black ***** are attachment points for a roof rack.
#13
sounds like the latch system is only working on one side, my guess is one of the cables pulled out of the latch and they will need a new set of those green cables/latches.
54347174761
https://www.northamericanmotoring.co...tible-top.html
Did they check these first?
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#14
Thanks all for chiming in. I'm not sure about the black *****. I'm guessing some kind of car cover as well. I have made no changes to the car. The cupholder base was there but only one cupholder came with the car. I'm still interested in selling but I've been busy lately.
Thread
Thread Starter
Forum
Replies
Last Post
NorthWestEuro
MINI Parts for Sale
20
12-12-2016 01:02 PM
DustinDallas
R52 :: Cabrio Talk (2005-2008)
65
03-20-2005 07:14 PM