FS:: Turbocharger and Inlet Tube
#1
Turbocharger and Inlet Tube
Category: Drivetrain
Price: $450
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): R55, R56, R57, R58, R59
Location (Region): SouthEast
Item Condition: Used
- $450 - Turbocharger - 11657595678 - From my 2013 MCS, N18 Engine - 24800 miles, also allowed to cool down before shutting off engine. Comes from an engine that burns ZERO oil.
- $50 - Inlet Tube - 13717627501 - From the above 2013 MCS Turbocharger - Rubber seal is in great condition - The whole piece is in great condition.
Paypal only and all prices INCLUDE shipping to the lower 48 states or local pickup in Raleigh, NC.
----
#3
Yes I do. It was a straight forward install. Swapped to the Detroit Tuned oil feed line while I had everything apart.
I'll be getting the manic tune reflashed soon.
I'll be getting the manic tune reflashed soon.
#5
Just an opinion but I would keep the stock tube (pull out the rubber sleeve) and use it as nothing else fits better. Especially if using a GFB BOV as there is no room with a silicone inlet hose.
I just went back to it after a year of dealing with the silicone inlet hose.
I just went back to it after a year of dealing with the silicone inlet hose.
#6
Turbocharger and Inlet Tube
Originally Posted by Indimanic
Just an opinion but I would keep the stock tube (pull out the rubber sleeve) and use it as nothing else fits better. Especially if using a GFB BOV as there is no room with a silicone inlet hose.
I just went back to it after a year of dealing with the silicone inlet hose.
I just went back to it after a year of dealing with the silicone inlet hose.
Trending Topics
#8
Moderator
iTrader: (3)
Just an opinion but I would keep the stock tube (pull out the rubber sleeve) and use it as nothing else fits better. Especially if using a GFB BOV as there is no room with a silicone inlet hose.
I just went back to it after a year of dealing with the silicone inlet hose.
I just went back to it after a year of dealing with the silicone inlet hose.
#9
Intake tube
Is the intake tube still available.. My has a crack at the clamp area and looking to replace.. If you may have info of aftermarket you could share that would be great as well..
Ron
Ron
Thread
Thread Starter
Forum
Replies
Last Post
ECSTuning
Vendor Announcements
0
10-01-2015 12:13 PM