North American Motoring - Search Results

 
Showing results 1 to 50 of 191
Search took 0.01 seconds.
04-17-2019, 07:22 AM
Replies: 15
Views: 1,353

the engine was damaged from before, it just...

the engine was damaged from before, it just finally let go
if you were running that much meth and it failed, the tune is way off
04-16-2019, 06:53 PM
Replies: 15
Views: 1,353

he's running a bigger turbo on a tune that...

he's running a bigger turbo on a tune that deadens the knock sensor, it's going to break. We see it all the time
Rods/pistons are a minimum. Water meth with that stage 3 will make it last longer....
04-10-2019, 08:57 PM
Replies: 10
Views: 873

where is the OP located? If you are in SoCal you...

where is the OP located? If you are in SoCal you can swing by and get a ride in some cars to get an idea of how much power etc you want/need
04-08-2019, 03:57 PM
Replies: 7
Views: 478

the problem on those tunes they deaden the knock...

the problem on those tunes they deaden the knock sensor from pulling timing. It's why so many are broken. Then the "flashers" say the engine is made of glass.......if the car is tuned properly the...
Forum: JCW Garage
04-04-2019, 09:58 AM
Replies: 9
Views: 861

would be nice if it sounds totally different....

would be nice if it sounds totally different. Most BMW's are lacking in exhaust note
04-04-2019, 09:18 AM
Replies: 5
Views: 796

It's on our website, same tool we use for all of...

It's on our website, same tool we use for all of the Mini's
1st gen, 2nd gen and 3rd gen

we will be getting a car this weekend to work on that has a bigger turbo on an N18 and dyno tuning it....
04-04-2019, 08:32 AM
Replies: 5
Views: 796

Why am I getting an update for the post and no...

Why am I getting an update for the post and no post?
I can see the post in my email...............Mods?
04-02-2019, 07:33 AM
Replies: 5
Views: 796

We will be working on a Mini with a bigger turbo...

We will be working on a Mini with a bigger turbo soon for the N18 since there seems to be so many problems with the other tuners out there and cars not making power. Hope to have a solution for all...
03-30-2019, 06:04 AM
Replies: 25
Views: 10,027

4032 is a great material. The perception in the...

4032 is a great material. The perception in the industry is that it is not as strong as 2618. The truth is that in equal conditions the 4032 is not as forgiving as 2618 due to its higher silicon...
03-28-2019, 07:15 AM
Replies: 37
Views: 2,202

this is the turbo we sell, it comes directly from...

this is the turbo we sell, it comes directly from Germany, they are hard to get. They make another 40hp over the JCW turbo, spool fast and are trouble free...
03-27-2019, 10:20 AM
Replies: 37
Views: 2,202

whenever I see parts sold as "borg warner" and...

whenever I see parts sold as "borg warner" and it's below the cost price..........it makes me wonder
03-04-2019, 10:50 AM
Replies: 29
Views: 3,323

the main problem is: fuel trimming with stock ecu...

the main problem is: fuel trimming with stock ecu
plus you don't know for sure how much ethanol you have in the tank which will lead to blown engines

my system, it always knows and makes...
03-04-2019, 07:31 AM
Replies: 29
Views: 3,323

its stand alone only. It's a full motorsport ecu...

its stand alone only. It's a full motorsport ecu with traction control, launch control, boost control, knock control, closed loop control..........etc etc
It has multi-fuel capabilities to run the...
Forum: JCW Garage
03-03-2019, 04:02 PM
Replies: 33
Views: 3,273

13.5psi is normal anywhere near sea level. You...

13.5psi is normal anywhere near sea level. You can do the calcs for altitude
Forum: JCW Garage
03-03-2019, 03:48 PM
Replies: 33
Views: 3,273

it's because your blower is dead

it's because your blower is dead
03-03-2019, 03:46 PM
Replies: 41
Views: 1,989

really? I have seen you attack me on most threads...

really? I have seen you attack me on most threads when my name is mentioned.....Hi pot , meet kettle
regardless, there will never be a real challenge on these topics because everyone is scared to...
03-03-2019, 01:40 PM
Replies: 29
Views: 3,323

The only real way to do it safely and correctly. ...

The only real way to do it safely and correctly. We have developed a flex fuel kit which will allow you to dump anything in the tank from pump gas to E100 and the car will run correctly. No more...
02-27-2019, 10:36 AM
Replies: 37
Views: 2,202

These are made in Germany and can take some time...

These are made in Germany and can take some time to get here. They are a fantastic upgrade turbo that will not cause issues. It's the only turbo we sell that is a direct bolt on. You get what you pay...
02-27-2019, 09:29 AM
Replies: 37
Views: 2,202

You would be 100% incorrect, I'm the only one...

You would be 100% incorrect, I'm the only one actually developing proper fixes for fueling, flex fuel and engine control. It will be done correctly, (not adding port injection) This is a costly and...
02-25-2019, 02:12 PM
Replies: 10
Views: 1,143

never a problem getting everyone to Helix in...

never a problem getting everyone to Helix in Philly.....just a suggestion
02-20-2019, 05:13 PM
Replies: 5
Views: 1,496

The Powerbrake kit is now available in RED,...

The Powerbrake kit is now available in RED, BLACK, and the Grey you see. We have sold quite a few of these kits now and the overwhelming response has been fantastic. We have the rear rotors now to...
02-11-2019, 07:54 AM
Replies: 2
Views: 601

We use the Supertech rods/pistons with zero issues

We use the Supertech rods/pistons with zero issues
01-15-2019, 08:22 AM
Replies: 102
Views: 20,016

stop deleting posts.......it's relevant to this...

stop deleting posts.......it's relevant to this nonsense.....the poster isn't capable of following the timeline.....it's obvious he couldn't have logged the data with bytronik because it wasn't...
01-14-2019, 07:32 PM
Replies: 102
Views: 20,016

Still no posted logs or the dyno from the guy who...

Still no posted logs or the dyno from the guy who calls people a liar.........but here he is....going on and on and still doesn't know how his cam gear works

here is a post from his bytronik guys...
01-13-2019, 11:42 AM
Replies: 102
Views: 20,016

thanks for the kind words in a sea of posts of...

thanks for the kind words in a sea of posts of people who don't want to see the truth in a real head to head battle. It's just smear tactics, If they truly believed what they wrote they would take...
01-13-2019, 11:17 AM
Replies: 102
Views: 20,016

I'll talk to the 2 Mini techs who have both heads...

I'll talk to the 2 Mini techs who have both heads and dyno'd. The thumper one was tuned by bytronik
I'm 100% confident you don't want to show the power you can make with those parts, I've asked for...
01-11-2019, 10:05 AM
Replies: 102
Views: 20,016

as was the boost which was drastically in your...

as was the boost which was drastically in your favor.......a pound of boost typically equates to about 8hp . You can continue to spin this 7 ways to Sunday, it doesn't change the facts. The heads...
01-10-2019, 03:45 PM
Replies: 102
Views: 20,016

you and the truth don't match well

you and the truth don't match well
01-10-2019, 09:10 AM
Replies: 102
Views: 20,016

I know you are new to testing because if you...

I know you are new to testing because if you truly understood testing on a roller dyno that 2.8 ft. lbs of torque is well within the acceptable range of standard deviation.(Just look at the thumper...
01-09-2019, 06:18 PM
Replies: 102
Views: 20,016

I'm 100% calm I'm not the one posting false...

I'm 100% calm
I'm not the one posting false claims and acting like they are facts. He still doesn't even know how the ACG works. I'll work on getting 2 Mini techs at a dealership to post
1 bought...
01-09-2019, 03:37 PM
Replies: 102
Views: 20,016

nothing says "clown" more than you locking...

nothing says "clown" more than you locking threads and deleting posts that you can't take the heat on.....
when you want to have a real test of theories.......get your boy to build an engine and we...
01-09-2019, 11:01 AM
Replies: 102
Views: 20,016

Ok, so in all the threads you say small ports are...

Ok, so in all the threads you say small ports are better, so now it's, " well your car has bigger valves".........you can't have it both ways. Either your head porting solution works or it doesn't....
12-20-2018, 08:52 AM
Replies: 102
Views: 20,016

https://cimg6.ibsrv.net/gimg/www.northamericanmoto...

https://cimg6.ibsrv.net/gimg/www.northamericanmotoring.com-vbulletin/817x685/rmw_vs_thumper_5bfcf05b58de9e4593f6fe3f2f15ed9edea7fef6.jpg
Here is what real dyno graphs look like
the one that is...
12-20-2018, 08:48 AM
Replies: 102
Views: 20,016

So now I'm cooking the tunes? You know that's...

So now I'm cooking the tunes? You know that's slander right?
I have never , ever detuned a car that had someone else's parts on it........NEVER



the reason for this is: I'm the only one with...
12-17-2018, 05:56 PM
Replies: 102
Views: 20,016

I'm not sure why you can't see the difference in...

I'm not sure why you can't see the difference in performance
the thumper head even had more boost going to it........you can't even make this stuff up

why don't you get Mike Pinson to post up a...
11-04-2018, 07:06 AM
Replies: 20
Views: 3,716

not sure who told you that about heat soak,...

not sure who told you that about heat soak, because your intercooler is on top of the engine, heat rises........I think you get the point

does it run cooler than the M45 or sprintex at same boost...
11-02-2018, 08:48 AM
Replies: 20
Views: 3,716

I think it would be cheaper for you to have one...

I think it would be cheaper for you to have one made locally
the jig would cost more than that for me to do it, let alone the fabrication hours
this is exactly why I am telling you find 10 people...
11-02-2018, 08:26 AM
Replies: 20
Views: 3,716

not worth going through the fabrication work for...

not worth going through the fabrication work for 1
you can get me 10 people that want them and we have a deal
11-02-2018, 07:30 AM
Replies: 20
Views: 3,716

I don't think any of the kits out there fit the...

I don't think any of the kits out there fit the automatic without modifications to the intake tube as the Auto is different
09-19-2018, 03:06 PM
Replies: 13
Views: 5,596

all my kits are race kits NO A/C

all my kits are race kits
NO A/C
08-23-2018, 09:59 AM
Replies: 7
Views: 477

knowing what I've read from you , I'm 100%...

knowing what I've read from you , I'm 100% confident you did do it...... but did you jump out of a plane without a parachute?
there is a reason why the factory put 380s in the car with just a 11%...
08-23-2018, 07:07 AM
Replies: 4
Views: 513

#1 goes where the chain is, then 2, 3, 4, 5

#1 goes where the chain is, then 2, 3, 4, 5
08-22-2018, 05:46 PM
Replies: 4
Views: 513

the cam caps are line bored to each and every...

the cam caps are line bored to each and every head
you can't just swap them
08-22-2018, 05:13 PM
Replies: 247
Views: 64,538

working with SWIFT to make some custom springs...

working with SWIFT to make some custom springs for the rears as these are a weird design and nothing on the shelf for them at the moment. High quality but I am a huge SWIFT spring fan.......
once...
08-22-2018, 09:24 AM
Replies: 7
Views: 477

actually you do with a 17% pulley can you do...

actually you do with a 17% pulley

can you do it without? Sure
you can also jump out of a plane without a parachute too...
08-09-2018, 07:20 AM
Replies: 20
Views: 3,716

all depends on pulley size and your tuning ...

all depends on pulley size and your tuning
20-40whp
08-08-2018, 02:41 PM
Replies: 20
Views: 3,716

I have a front mount intercooler kit coming for...

I have a front mount intercooler kit coming for the base TVS900 kit. Will allow you to make up to 350whp
08-02-2018, 03:51 PM
Replies: 14
Views: 1,480

you really need to get a life

you really need to get a life
08-02-2018, 02:17 PM
Replies: 14
Views: 1,480

anybody that truly understands tuning would know...

anybody that truly understands tuning would know that my tune is nothing like a Shark tune , nor is it a Lean JCW map
it's quite entertaining that a person would say that when I was the 1st tuner...
Forum: 1st Gear
07-31-2018, 07:57 AM
Replies: 27
Views: 848

anyone can build a car to race how many can...

anyone can build a car to race
how many can build them to win?

this is exactly why I don't post much anymore, everyone is an expert without the hardware to back up their claims
Showing results 1 to 50 of 191
 


 
Forum Jump

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.