North American Motoring

North American Motoring (https://www.northamericanmotoring.com/forums/)
-   SCCA Solo and ProSolo (https://www.northamericanmotoring.com/forums/scca-solo-and-prosolo-199/)
-   -   D Stock R56 front sway bar (https://www.northamericanmotoring.com/forums/scca-solo-and-prosolo/117874-r56-front-sway-bar.html)

ken o 10-24-2007 11:56 AM

R56 front sway bar
 
Do they make a small front bar for the R56?

Does anyone know the size difference from the MC and MCS from bar?

ken o 10-24-2007 01:29 PM

Found this: stock sway bar is 17mm, sport suspension sway bar is 18mm. I think this is R56. Would 1mm be noticeable?

PistWalrus 01-22-2008 12:03 PM

Yes it is, try to drive a car with and without.

clayhorste 01-22-2008 07:39 PM

I am curious about this topic. I have been in other FWD circles and they too tend to limit the front swaybar on FWD cars. Others tend to beef them up saying that the reduction in roll is of more benefit than the balance that you would gain by going smaller. Has anyone experimented with going larger?

C2Ron 01-28-2008 07:11 PM

sway bar size
 
I've started with large bars, and have always evolved to smaller ones. Basically, you just get too much lifting of the unloaded wheel with a big bar.


All times are GMT -7. The time now is 06:04 PM.


© 2024 MH Sub I, LLC dba Internet Brands