From last December/January
 

Here's some of mine:

Attachment 195216

Attachment 195217

Looks great, I think tinted windows are a must for the Paceman. The lines look better. In my opinion.

https://www.northamericanmotoring.co...405_120651.jpg

My new baby

Sent from my iPhone using NAMotoring

My new to me s all4.

https://www.northamericanmotoring.co...-744767012.jpg

Nice Shot.

Here's my R61S Bright White
 

So I see it's been a while for this thread, I figured let's post a pic anyway.
This my 4 Mini, had an 03, 10, 14 and now my 15. Here's a pic from the dealer that I sent my wife when trying to convince her.
Gotta take some better pics and post.

Very nice Light white Paceman , looks like with the new factory DRL LED fog lights also. I really like those.

Thanks ECS!
Have a question to see if anyone could help. Looking for just the rear body kit of the JCW for the Paceman. I saw a thread on this but couldn't get anything out of it, it was old, link didn't take me anywhere. Or looking for a body kit that goes around the pipes in the rear like the JCW. I would like to find something in carbon fiber really, but I think that's a little far fetch. Any help would be cool.

The factory one would be you best best. The problem is the JCW rear bumper fits the tip inside. If I were you I would go with the whole aero kit . I looks super nice. Then get some 1080 3M Carbon fiber and warp the sections. The wrap should work well because the rear bumper does vent the air around the exhaust. Does not get too hot. On the rear the exhuast tip come off for trh cooper S and the tip are all ready mounted in the bumper, the exhaust pip just hangs close to those.

https://www.northamericanmotoring.co...aust-tips.html


https://cimg1.ibsrv.net/gimg/www.nor...611041c8db.jpg


51119810623KT1 & 51119810623KT

https://www.ecstuning.com/Mini-2015-Cooper_Paceman-R61-S-Hatchback-L4_1.6L_N18B16A/Exterior/Body/


Diagram:

http://www.realoem.com/bmw/enUS/show...diagId=51_9334


Looks like this in light white.


https://cimg3.ibsrv.net/gimg/www.nor...0c6c62ad64.jpg


https://cimg8.ibsrv.net/gimg/www.nor...e5b92e245f.jpg



There is a PDC version and w/o PDC version, that's the factory Parking distance control on the rear bumper if you ordered it.


3M wrap

https://www.ecstuning.com/Mini-2015-Cooper_Paceman-R61-S-Hatchback-L4_1.6L_N18B16A/Search/SiteSearch/3m_Wrap/


https://cimg6.ibsrv.net/gimg/www.nor...1dcc32b201.jpg



Let me know if you just want the rear section.

Here's my '13, bought it last year with only 1900 miles on it.

JCW rear aero kit
 

ECS,
Thanks for all that!
I think for the price I will only be interested in just the rear section right now.
Also that first pic of the pipes, is that a JCW? It doesn't look like one, why does it appear to be surrounded by a smooth grey plastic rather than the regular black plastic? I ask only because I've been told that the black plastic can't be wrapped in vinyl, vinyl wrap doesn't adhere to it.
That pic with the grey seems like the way to go. Does ECS have just that rear section in the light white color?

You are welcome. No version already painted. Its the lighting and bad pic. Its black and textured a bit, the 3M will stick if prep'd and cleaned with alcohol, just to make sure no tire shine has been put on there.

You reuse the upper part of the bumper and the center piece on you old one that is painted.

Diagram : http://www.realoem.com/bmw/enUS/show...34#51119810623


# 3 51129810643

https://www.ecstuning.com/Search/Sit...h/51129810643/

#4

https://www.ecstuning.com/Search/Sit...h/51129810630/

#9

https://www.ecstuning.com/Search/Sit...h/51129813169/

https://www.ecstuning.com/Search/Sit...h/51129813170/

#10

https://www.ecstuning.com/Search/Sit...h/51129810641/

https://www.ecstuning.com/Search/Sit...h/51129810642/


#11

https://www.ecstuning.com/Search/Sit...h/51129813173/

https://www.ecstuning.com/Search/Sit...h/51129813174/

Nice pic look very warm, what memorial is that ?

This is a few of my jcw paceman

https://cimg7.ibsrv.net/gimg/www.nor...f064b556f.jpeg


https://cimg1.ibsrv.net/gimg/www.nor...97a57d6d2.jpeg


https://cimg2.ibsrv.net/gimg/www.nor...f61e669c4.jpeg


https://cimg3.ibsrv.net/gimg/www.nor...26fd80337.jpeg

You have a nicely modified and lowered Paceman, Rare to see like that in the US here. What coilovers are you running ?

Thanks it's not popular over here either I find I hard to get things for it and Iv got BC coilovers lowers about 3 inches

Welcome, Allot of the CM stuff might cross over, just never tested by the aftermarket companies. So keep a eye out for that. Of course front end ~ same as CM, rear end is different though on trim and such.

Megans and KW are the other two options here in the states.

https://www.ecstuning.com/Mini-2013-...ion/Coilovers/

You have a very nice Paceman , keep it up. :)

I did look at other coilovers but the BC ones had adjustable dampers and they are easy to fit

I'm currently building an install it's all under Perspex

https://cimg1.ibsrv.net/gimg/www.nor...290e8326d.jpeg

Iv got a few countryman bits fitted at the front more to come

https://cimg6.ibsrv.net/gimg/www.nor...685121249.jpeg

Nice , looks like forge Caps ? And what strut tower brace is that ?

Yes forge caps and it's a wiechers strut brace from Germany
https://cimg2.ibsrv.net/gimg/www.nor...8a266c3d1.jpeg

What are your wheels specs? They look like 18" but can't tell. Love to see wheels that aint all extreme "hellaflush".

Mine? Just stock 19" x 7.5" y-spokes

That's hauling :)


Yes those are the Y spokes/ R139's , 19" x 7.5 largest size stock wheels. 36109809485

https://www.ecstuning.com/Mini-2013-Cooper_Paceman-R61-S_All4-Hatchback-L4_1.6L_N18B16A/Wheels/OEM_Alloys/


Very unique on the Paceman