R60 Bigger cup holders for 2011-2012 owners
#51
I just checked and the dash parts aren't supposed to ship until September! Oh well, not the end of the world, and the prices were really good.
New cupholder console---------------Est Ship Date: 08/01/2013
Rubber insert, drink holder-----------Est Ship Date: 08/01/2013
Trim ring, gearshift--------------------Est Ship Date: 09/03/2013
Trim ring, mickey----------------------Est Ship Date: 09/03/2013
Air outlet, left--------------------------Est Ship Date: 09/09/2013
Air outlet, right------------------------Est Ship Date: 09/09/2013
New cupholder console---------------Est Ship Date: 08/01/2013
Rubber insert, drink holder-----------Est Ship Date: 08/01/2013
Trim ring, gearshift--------------------Est Ship Date: 09/03/2013
Trim ring, mickey----------------------Est Ship Date: 09/03/2013
Air outlet, left--------------------------Est Ship Date: 09/09/2013
Air outlet, right------------------------Est Ship Date: 09/09/2013
#52
I just checked and the dash parts aren't supposed to ship until September! Oh well, not the end of the world, and the prices were really good.
New cupholder console---------------Est Ship Date: 08/01/2013
Rubber insert, drink holder-----------Est Ship Date: 08/01/2013
Trim ring, gearshift--------------------Est Ship Date: 09/03/2013
Trim ring, mickey----------------------Est Ship Date: 09/03/2013
Air outlet, left--------------------------Est Ship Date: 09/09/2013
Air outlet, right------------------------Est Ship Date: 09/09/2013
New cupholder console---------------Est Ship Date: 08/01/2013
Rubber insert, drink holder-----------Est Ship Date: 08/01/2013
Trim ring, gearshift--------------------Est Ship Date: 09/03/2013
Trim ring, mickey----------------------Est Ship Date: 09/03/2013
Air outlet, left--------------------------Est Ship Date: 09/09/2013
Air outlet, right------------------------Est Ship Date: 09/09/2013
Michael
Last edited by pyrrhusmj; 07-16-2013 at 07:02 PM.
#53
I just checked and the dash parts aren't supposed to ship until September! Oh well, not the end of the world, and the prices were really good.
New cupholder console---------------Est Ship Date: 08/01/2013
Rubber insert, drink holder-----------Est Ship Date: 08/01/2013
Trim ring, gearshift--------------------Est Ship Date: 09/03/2013
Trim ring, mickey----------------------Est Ship Date: 09/03/2013
Air outlet, left--------------------------Est Ship Date: 09/09/2013
Air outlet, right------------------------Est Ship Date: 09/09/2013
New cupholder console---------------Est Ship Date: 08/01/2013
Rubber insert, drink holder-----------Est Ship Date: 08/01/2013
Trim ring, gearshift--------------------Est Ship Date: 09/03/2013
Trim ring, mickey----------------------Est Ship Date: 09/03/2013
Air outlet, left--------------------------Est Ship Date: 09/09/2013
Air outlet, right------------------------Est Ship Date: 09/09/2013
#54
I'm swapping out my 2011/2012 air vents/mickey for the 2013 version that is much less obtrusive. There is a thread about it with pictures here: https://www.northamericanmotoring.co...d.php?t=243440
#56
#57
Just received an email from my parts mgr....everything is in...
Fred,
Friday afternoon I received the last piece of the order for the center console. I have the center piece with the cup holders, the trim for the shifter and the inserts for the cup holders.
As far as a rear cargo box/rack I have not heard of such a beast. The only thing I now of hooking into the two tow hooks on the rear is the bike rack. I will keep my ears open about it though.
Thank you,
Darin W. Stricker
Parts Manager
NC BMW/MINI
Great Team over at New Country
Fred,
Friday afternoon I received the last piece of the order for the center console. I have the center piece with the cup holders, the trim for the shifter and the inserts for the cup holders.
As far as a rear cargo box/rack I have not heard of such a beast. The only thing I now of hooking into the two tow hooks on the rear is the bike rack. I will keep my ears open about it though.
Thank you,
Darin W. Stricker
Parts Manager
NC BMW/MINI
Great Team over at New Country
#58
Just received an email from my parts mgr....everything is in...
Fred,
Friday afternoon I received the last piece of the order for the center console. I have the center piece with the cup holders, the trim for the shifter and the inserts for the cup holders.
As far as a rear cargo box/rack I have not heard of such a beast. The only thing I now of hooking into the two tow hooks on the rear is the bike rack. I will keep my ears open about it though.
Thank you,
Darin W. Stricker
Parts Manager
NC BMW/MINI
Great Team over at New Country
Fred,
Friday afternoon I received the last piece of the order for the center console. I have the center piece with the cup holders, the trim for the shifter and the inserts for the cup holders.
As far as a rear cargo box/rack I have not heard of such a beast. The only thing I now of hooking into the two tow hooks on the rear is the bike rack. I will keep my ears open about it though.
Thank you,
Darin W. Stricker
Parts Manager
NC BMW/MINI
Great Team over at New Country
#59
#60
2nd Gear
iTrader: (-1)
Join Date: Jul 2012
Location: NYC
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
just finished change out my cup holder, it took me 15mins to compete it.. most of the time I used on removeing the charger cover ( the orange thing ) from the cup holder....
I used my old ashtray as a coin holder and put it in the old cup holder..
so now I have a question for any 2013 owner.... does the 2013 come with ashtray that fits into the bigger cup holder? ??
Also the Shifter Trim Ring (51-16-9-810-002) that OP posted is in BLACK color not grey if anyone care..
I used my old ashtray as a coin holder and put it in the old cup holder..
so now I have a question for any 2013 owner.... does the 2013 come with ashtray that fits into the bigger cup holder? ??
Also the Shifter Trim Ring (51-16-9-810-002) that OP posted is in BLACK color not grey if anyone care..
#62
just finished change out my cup holder, it took me 15mins to compete it.. most of the time I used on removeing the charger cover ( the orange thing ) from the cup holder....
I used my old ashtray as a coin holder and put it in the old cup holder..
so now I have a question for any 2013 owner.... does the 2013 come with ashtray that fits into the bigger cup holder? ??
Also the Shifter Trim Ring (51-16-9-810-002) that OP posted is in BLACK color not grey if anyone care..
I used my old ashtray as a coin holder and put it in the old cup holder..
so now I have a question for any 2013 owner.... does the 2013 come with ashtray that fits into the bigger cup holder? ??
Also the Shifter Trim Ring (51-16-9-810-002) that OP posted is in BLACK color not grey if anyone care..
#63
Picked up my parts today for the larger cup upgrade install.........
Center Trim Panel (51-16-9-811-185) $27.48
Shifter Trim Ring (51-16-9-810-002) $14.34
Cup Holder Rubber Disc Inserts (51-16-9-811-184) $5.69 each
Ofcourse I should of looked a bit closer before dis-assembling
Center Trim Panel, Part # (51-16-9-811-185 is for a non-nav. console....
Oh well, did a bit of house cleaning while everything was apart
I believe the correct part # for the center console with connected/Nav.
(Joy Stick) is 51-16-9-811-186, but I will confirm that with parts tomorrow..
Other than that it fit like a glove...the cup holders are noticeable larger without the spring like clips of the older style, but with new bendable rubber tabs...
By chance anyone install a center console with the connected/Nav. Joy Stick...
Center Trim Panel (51-16-9-811-185) $27.48
Shifter Trim Ring (51-16-9-810-002) $14.34
Cup Holder Rubber Disc Inserts (51-16-9-811-184) $5.69 each
Ofcourse I should of looked a bit closer before dis-assembling
Center Trim Panel, Part # (51-16-9-811-185 is for a non-nav. console....
Oh well, did a bit of house cleaning while everything was apart
I believe the correct part # for the center console with connected/Nav.
(Joy Stick) is 51-16-9-811-186, but I will confirm that with parts tomorrow..
Other than that it fit like a glove...the cup holders are noticeable larger without the spring like clips of the older style, but with new bendable rubber tabs...
By chance anyone install a center console with the connected/Nav. Joy Stick...
#64
Got mine today and 15 mins later it was in nice and snug!!
Have to say its the single best mod I have ever done to just about any car I have owned. Not only does my Klean Kanteen fit, which isn't really even that wide at all, but also my BIG SIGG (1.5L) water bottle and my sons Camelbak water bottle (those two are pretty wide).
Original:
SIGG:
Camelbak:
Don't have a pic of the Klean Kanteen, but it is smaller in diameter then the two pictured.
I really like the dark ring as well. Really makes me want to change out the Mickey and the air vents
Have to say its the single best mod I have ever done to just about any car I have owned. Not only does my Klean Kanteen fit, which isn't really even that wide at all, but also my BIG SIGG (1.5L) water bottle and my sons Camelbak water bottle (those two are pretty wide).
Original:
SIGG:
Camelbak:
Don't have a pic of the Klean Kanteen, but it is smaller in diameter then the two pictured.
I really like the dark ring as well. Really makes me want to change out the Mickey and the air vents
#65
Got mine today and 15 mins later it was in nice and snug!!
Have to say its the single best mod I have ever done to just about any car I have owned. Not only does my Klean Kanteen fit, which isn't really even that wide at all, but also my BIG SIGG (1.5L) water bottle and my sons Camelbak water bottle (those two are pretty wide).
Original:
SIGG:
Camelbak:
Don't have a pic of the Klean Kanteen, but it is smaller in diameter then the two pictured.
I really like the dark ring as well. Really makes me want to change out the Mickey and the air vents
Have to say its the single best mod I have ever done to just about any car I have owned. Not only does my Klean Kanteen fit, which isn't really even that wide at all, but also my BIG SIGG (1.5L) water bottle and my sons Camelbak water bottle (those two are pretty wide).
Original:
SIGG:
Camelbak:
Don't have a pic of the Klean Kanteen, but it is smaller in diameter then the two pictured.
I really like the dark ring as well. Really makes me want to change out the Mickey and the air vents
#66
Picked up my parts today for the larger cup upgrade install.........
Center Trim Panel (51-16-9-811-185) $27.48
Shifter Trim Ring (51-16-9-810-002) $14.34
Cup Holder Rubber Disc Inserts (51-16-9-811-184) $5.69 each
Ofcourse I should of looked a bit closer before dis-assembling
Center Trim Panel, Part # (51-16-9-811-185 is for a non-nav. console....
Oh well, did a bit of house cleaning while everything was apart
I believe the correct part # for the center console with connected/Nav.
(Joy Stick) is 51-16-9-811-186, but I will confirm that with parts tomorrow..
Other than that it fit like a glove...the cup holders are noticeable larger without the spring like clips of the older style, but with new bendable rubber tabs...
By chance anyone install a center console with the connected/Nav. Joy Stick...
Center Trim Panel (51-16-9-811-185) $27.48
Shifter Trim Ring (51-16-9-810-002) $14.34
Cup Holder Rubber Disc Inserts (51-16-9-811-184) $5.69 each
Ofcourse I should of looked a bit closer before dis-assembling
Center Trim Panel, Part # (51-16-9-811-185 is for a non-nav. console....
Oh well, did a bit of house cleaning while everything was apart
I believe the correct part # for the center console with connected/Nav.
(Joy Stick) is 51-16-9-811-186, but I will confirm that with parts tomorrow..
Other than that it fit like a glove...the cup holders are noticeable larger without the spring like clips of the older style, but with new bendable rubber tabs...
By chance anyone install a center console with the connected/Nav. Joy Stick...
#67
Better then the original ones. They are slightly to the side and don't press against them at all. I can snap a pic from the side tomorrow.
#68
#69
I ordered the set of parts from BavAuto 6 weeks ago. I've been waiting patiently but asked them for the status update yesterday which resulted in them shipping out everything but the shifter trim ring today. Wondering why they're having an issue getting that part since that doesn't seem to be the trouble one for some of the other people here.
#70
2nd Gear
iTrader: (-1)
Join Date: Jul 2012
Location: NYC
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
I ordered the set of parts from BavAuto 6 weeks ago. I've been waiting patiently but asked them for the status update yesterday which resulted in them shipping out everything but the shifter trim ring today. Wondering why they're having an issue getting that part since that doesn't seem to be the trouble one for some of the other people here.
I waited almost 3 months for all my parts to arrive..
#71
#72
I ordered the set of parts from BavAuto 6 weeks ago. I've been waiting patiently but asked them for the status update yesterday which resulted in them shipping out everything but the shifter trim ring today. Wondering why they're having an issue getting that part since that doesn't seem to be the trouble one for some of the other people here.
#73
#74
I am still showing a ship date of 8/2, but I ordered n 7/1 so theSeptember time frame is probably true.