|
How to removed breather hose.
How to removed breather hose from valve cover. I try to squeeze It but It have a lock on both side. I have no idea how to.
https://cimg9.ibsrv.net/gimg/www.nor...1a1a4f186f.jpg https://cimg5.ibsrv.net/gimg/www.nor...bef4336fa5.jpg Clip lock on both side can't squeeze. https://cimg6.ibsrv.net/gimg/www.nor...fced82d478.jpg |
Are you sure you're supposed to squeeze them? They look like the opposite to me, like you have to pry them open.
|
Prying them open does look kind of obvious from those pics....
|
Originally Posted by chrunck
(Post 4462711)
Are you sure you're supposed to squeeze them? They look like the opposite to me, like you have to pry them open.
|
The “official” removal instructions state those tabs get broken off, and new clip used for replacement.
https://www.newtis.info/tisv2/a/en/r...shaft/DcdDjVzJ https://www.ecstuning.com/b-genuine-...w/11127589618/ |
Originally Posted by njaremka
(Post 4463032)
The “official” removal instructions state those tabs get broken off, and new clip used for replacement.
https://www.newtis.info/tisv2/a/en/r...shaft/DcdDjVzJ https://www.ecstuning.com/b-genuine-...w/11127589618/ |
I have taken mine off without breaking anything. It took some careful wiggling of the hose and gently prying the tabs apart.
|
It’s a one time use per bmw, but you can be gentle and pry it open
|
| All times are GMT -7. The time now is 11:25 AM. |
© 2024 MH Sub I, LLC dba Internet Brands