R60 Drive Cycle
#1
Drive Cycle
Have a Maniac Stage II tune.
Does anyone know the MINI drive cycle?
A couple of monitors show (INC): Oxygen Sensor Monitor and EGR System Monitor. All others are ready or have completed.
I am not sure what part of the drive cycle starts these tests. I cannot find MINI specific info and I could not find it in the manual.
Thanks!
Does anyone know the MINI drive cycle?
A couple of monitors show (INC): Oxygen Sensor Monitor and EGR System Monitor. All others are ready or have completed.
I am not sure what part of the drive cycle starts these tests. I cannot find MINI specific info and I could not find it in the manual.
Thanks!
#2
#3
#4
Unfortunately from what I understand you will not get it to read a readiness state with Manic. The code out the CEL, but it will fail the readiness test. RPM has fixed this with their tune, but that doesn’t do much for you. As far as I know you can fail one readiness test for emissions testing in most states, but only one, so if there’s nothing else wrong it should pass emissions if that was the concern.
I do t know if this is what you were looking for or not. Good luck
I do t know if this is what you were looking for or not. Good luck
#5
Correct :( Nothing will set the O2 sensor as it's about heat and a catless downpipe simply will not generate the heat needed. No spacer solution would work. RPM fixed it? That is really interesting! I will have to ask about that.
The EGR sensor is also failing to set. I have no idea where this sensor is.
The EGR sensor is also failing to set. I have no idea where this sensor is.
Thread
Thread Starter
Forum
Replies
Last Post