R60 :: Countryman Talk (2010-2015) R60 Cooper and Cooper S hatchback discussion NOT REPAIR RELATED Discussions.

R60 Help! JB+ Check Engine Light

Thread Tools
 
Search this Thread
 
  #1  
Old 09-10-2016, 03:30 PM
RedCountryS's Avatar
RedCountryS
RedCountryS is offline
1st Gear
Thread Starter
Join Date: May 2016
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Help! JB+ Check Engine Light

Hi, I got the JB+ (n18 burger tuning plug and play) installed in my Mini Cooper S (R60) and as soon as I started the car I got a check engine light, I decided to give it some time and about 2 weeks have passed and I still have the check engine light, car is fine, I don't feel anything wrong rather than the extra power im getting from the JB+. Why do I have the check engine light on and how can i clear it? Btw. I have a NM Engineering intake on my car too. I appreciate your help guys.
 
  #2  
Old 09-10-2016, 03:33 PM
Phillbis's Avatar
Phillbis
Phillbis is offline
1st Gear
Join Date: Aug 2016
Location: Pittsburgh PA
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
Get an OBD reader and see what the error code is? You can also clear CELs with an ODB reader if the issue is resolved.
 
  #3  
Old 09-10-2016, 03:35 PM
RedCountryS's Avatar
RedCountryS
RedCountryS is offline
1st Gear
Thread Starter
Join Date: May 2016
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Phillbis
Get an OBD reader and see what the error code is? You can also clear CELs with an ODB reader if the issue is resolved.
does the $20 wifi one from amazon or ebay works for this?
 
  #4  
Old 09-10-2016, 03:44 PM
MarioKart's Avatar
MarioKart
MarioKart is offline
Vendor
iTrader: (3)
Join Date: Sep 2006
Location: Ventura, CA
Posts: 3,303
Likes: 0
Received 115 Likes on 93 Posts
Where did you buy it? There have been some fake JB+ floating on EBay now

mQubed Motorsport, Manic Tuning Dealer
 
__________________
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
  #5  
Old 09-10-2016, 03:53 PM
Phillbis's Avatar
Phillbis
Phillbis is offline
1st Gear
Join Date: Aug 2016
Location: Pittsburgh PA
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by RedCountryS
does the $20 wifi one from amazon or ebay works for this?
I bought mine at Autozone for $49. It's not the best on the market but it does work for several cars.
 
  #6  
Old 09-10-2016, 03:54 PM
Phillbis's Avatar
Phillbis
Phillbis is offline
1st Gear
Join Date: Aug 2016
Location: Pittsburgh PA
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by MarioKart
Where did you buy it? There have been some fake JB+ floating on EBay now

mQubed Motorsport, Manic Tuning Dealer
Hi Mario, is there a way to determine if the JB+ is fake or not?
 
  #7  
Old 09-11-2016, 10:52 AM
MarioKart's Avatar
MarioKart
MarioKart is offline
Vendor
iTrader: (3)
Join Date: Sep 2006
Location: Ventura, CA
Posts: 3,303
Likes: 0
Received 115 Likes on 93 Posts
Originally Posted by Phillbis
Hi Mario, is there a way to determine if the JB+ is fake or not?
Can you post a picture of it

mQubed Motorsport, Manic Tuning Dealer
 
__________________
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
  #8  
Old 09-11-2016, 11:25 AM
RedCountryS's Avatar
RedCountryS
RedCountryS is offline
1st Gear
Thread Starter
Join Date: May 2016
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by MarioKart
Can you post a picture of it

mQubed Motorsport, Manic Tuning Dealer
Hi Mario, I bought it used from a friend, I doubt that it is fake, ill post a picture later when i get home
 
  #9  
Old 09-11-2016, 11:39 AM
Davers's Avatar
Davers
Davers is offline
2nd Gear
Join Date: Apr 2016
Location: Boise
Posts: 75
Received 11 Likes on 9 Posts
Originally Posted by RedCountryS
Hi, I got the JB+ (n18 burger tuning plug and play) installed in my Mini Cooper S (R60) and as soon as I started the car I got a check engine light, I decided to give it some time and about 2 weeks have passed and I still have the check engine light, car is fine, I don't feel anything wrong rather than the extra power im getting from the JB+. Why do I have the check engine light on and how can i clear it? Btw. I have a NM Engineering intake on my car too. I appreciate your help guys.
Having the same problem on my R57 just got back home in limp mode, scancode came up with P00BD.
 
  #10  
Old 09-11-2016, 11:57 AM
Phillbis's Avatar
Phillbis
Phillbis is offline
1st Gear
Join Date: Aug 2016
Location: Pittsburgh PA
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Davers
Having the same problem on my R57 just got back home in limp mode, scancode came up with P00BD.
P00BD is a MAF error. Can you unplug the JB+ and plug it back in? maybe the connection is loose since it plugs into the MAF.
 
  #11  
Old 09-11-2016, 12:07 PM
Davers's Avatar
Davers
Davers is offline
2nd Gear
Join Date: Apr 2016
Location: Boise
Posts: 75
Received 11 Likes on 9 Posts
Originally Posted by Phillbis
P00BD is a MAF error. Can you unplug the JB+ and plug it back in? maybe the connection is loose since it plugs into the MAF.
Just unplugged the JB+ cleared the error and the motor is running again no problems and no codes.
The car ran fine yesterday when i went for a blast on the freeway
***UPDATE***
So I uninstalled the JB+ and took it out on the freeway no problems ran perfect and normal, so when I got home I went through the whole install procedure locking doors letting it sit for 30 mins or so and then reconnected the unit back in. I then again went back onto the freeway and about 20 mins into the ride in the outside lane the engine lost all power and went into limp home mode at 80 mph.
I had my OBD2 scanner in the car and checked the code again P00BD (MAF error)came up so went disconnected the JB on the side of the freeway let things settle down and cleared the code and set of again and all is well again no codes and problems? I did install a K&N filter in the car this week and a Sprint Booster but i am not sure if either of these would affect the JB+ and throw out a MAF sensor error, any ideas would be appricated thanks
 

Last edited by Davers; 09-11-2016 at 06:24 PM. Reason: Update
  #12  
Old 09-11-2016, 04:54 PM
mattyb13's Avatar
mattyb13
mattyb13 is offline
3rd Gear
Join Date: Jun 2016
Location: Tampa, FL area
Posts: 179
Received 19 Likes on 13 Posts
Had the same thing happen to my 2016 Countryman S last week. The dealership installed the Burger Tuner; check engine light, another Burger Tuner; Check engine light again. The dealership called Burger. Turns out both of the ones they tried to install in my car were bad! Waiting for the dealership to get more this week and try again. Remaining optimistic but not too impressed right now.
 
  #13  
Old 09-11-2016, 04:58 PM
Davers's Avatar
Davers
Davers is offline
2nd Gear
Join Date: Apr 2016
Location: Boise
Posts: 75
Received 11 Likes on 9 Posts
Originally Posted by mattyb13
Had the same thing happen to my 2016 Countryman S last week. The dealership installed the Burger Tuner; check engine light, another Burger Tuner; Check engine light again. The dealership called Burger. Turns out both of the ones they tried to install in my car were bad! Waiting for the dealership to get more this week and try again. Remaining optimistic but not too impressed right now.
Wonder how they determined they were bad ? is there away to test these units or do they have to be sent back for testing
 
  #14  
Old 09-12-2016, 09:05 AM
mattyb13's Avatar
mattyb13
mattyb13 is offline
3rd Gear
Join Date: Jun 2016
Location: Tampa, FL area
Posts: 179
Received 19 Likes on 13 Posts
Originally Posted by Davers
Wonder how they determined they were bad ? is there away to test these units or do they have to be sent back for testing
@Davers... Not sure. The dealership is pro, those guys are great. I trust that they know what they are doing with the Burger Tuners. They install them all the time. Mine was the first 2016 Countryman they had installed one in tho. They contacted Burger and determined that the Tuners were bad. Trying again this week when some more come in off the truck. So anxious to drop the Burger in and get it going in my car!
 
  #15  
Old 09-12-2016, 01:38 PM
Phillbis's Avatar
Phillbis
Phillbis is offline
1st Gear
Join Date: Aug 2016
Location: Pittsburgh PA
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
I bought a used one off of a forum member and installed it today. No CELs and definitely noticed a difference in acceleration.
 
  #16  
Old 09-12-2016, 01:52 PM
Davers's Avatar
Davers
Davers is offline
2nd Gear
Join Date: Apr 2016
Location: Boise
Posts: 75
Received 11 Likes on 9 Posts
I bought a used one but cannot tell if its a bad unit or not? so I bit the bullet and ordered a new one with at least some backup warranty from Burger Tuning if i have any problems with the new unit
 

Last edited by Davers; 09-12-2016 at 06:23 PM.
  #17  
Old 09-12-2016, 06:19 PM
RedCountryS's Avatar
RedCountryS
RedCountryS is offline
1st Gear
Thread Starter
Join Date: May 2016
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by MarioKart
Can you post a picture of it

mQubed Motorsport, Manic Tuning Dealer


so this is my JB+ I doubt it is fake, maybe its a bad unit, i hope not
 
  #18  
Old 09-13-2016, 03:47 PM
Davers's Avatar
Davers
Davers is offline
2nd Gear
Join Date: Apr 2016
Location: Boise
Posts: 75
Received 11 Likes on 9 Posts
This is what I got not looking to good :( Teach me for being a cheapskate



Genuine from the Factory-Front



Genuine-Back nice soldering



Genuine on the left-Back



Genuine on left-Front



Genuine Plug on the left



Ebay Item -Back non factory solder



Ebay item - Front looks like non genuine chipset and missing rubber Grommets
 
  #19  
Old 09-14-2016, 11:08 AM
mattyb13's Avatar
mattyb13
mattyb13 is offline
3rd Gear
Join Date: Jun 2016
Location: Tampa, FL area
Posts: 179
Received 19 Likes on 13 Posts
@davers. Im catching up on this thread. Did you buy a knock-off Burger tuner mistakenly?
 
  #20  
Old 09-14-2016, 02:15 PM
Davers's Avatar
Davers
Davers is offline
2nd Gear
Join Date: Apr 2016
Location: Boise
Posts: 75
Received 11 Likes on 9 Posts
Originally Posted by mattyb13
@davers. Im catching up on this thread. Did you buy a knock-off Burger tuner mistakenly?
Thought I was getting a deal reported to the seller and ebay and have got a refund coming, this is a first for me on ebay but hopefully the photos might give people a little reference to watch out for
 
  #21  
Old 09-15-2016, 03:32 PM
RedCountryS's Avatar
RedCountryS
RedCountryS is offline
1st Gear
Thread Starter
Join Date: May 2016
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
wow man, huge thanks for posting this, I will check mine later to see if it is a knock-off, hope not
 
  #22  
Old 11-15-2020, 04:27 PM
iissac22's Avatar
iissac22
iissac22 is offline
1st Gear
Join Date: Apr 2020
Posts: 23
Received 0 Likes on 0 Posts
I know this thread is old but is this piggy back reliable good!
 
  #23  
Old 11-15-2020, 04:34 PM
Davers's Avatar
Davers
Davers is offline
2nd Gear
Join Date: Apr 2016
Location: Boise
Posts: 75
Received 11 Likes on 9 Posts
Jb+

Originally Posted by iissac22
I know this thread is old but is this piggy back reliable good!
I had no problems with mine, just wanted more than what this was giving me, it’s ok especially if you have a lease or car under warranty.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
LormaD
Navigation and Audio
23
05-08-2020 04:12 PM
98Ekhatch
Stock Problems/Issues
4
08-16-2016 01:56 PM
Fishbreath
Stock Problems/Issues
10
08-16-2016 12:38 PM
mc40#822
MINI Parts for Sale
0
08-12-2016 04:57 PM
nels415
R56 :: Hatch Talk (2007+)
4
08-12-2016 01:26 PM



Quick Reply: R60 Help! JB+ Check Engine Light



All times are GMT -7. The time now is 04:08 AM.