Originally Posted by MannyJimenez
(Post 4295085)
I added the JB+ ✅
I (Finally) changed the stock front lower lip to the JCW Front Lip (Thanks ECS Tuning) ✅ I swapped out the regular brake lines for the Stainless Steel Brake Lines (from ECS Tuning) ✅ I gave it a wash and wax :thumbsup: http://i520.photobucket.com/albums/w...ps5wzfgoka.jpg http://i520.photobucket.com/albums/w...ps8j7ubrwi.jpg http://i520.photobucket.com/albums/w...psl2g3nzus.jpg |
Originally Posted by MannyJimenez
(Post 4295085)
I added the JB+ ✅
I (Finally) changed the stock front lower lip to the JCW Front Lip (Thanks ECS Tuning) ✅ I swapped out the regular brake lines for the Stainless Steel Brake Lines (from ECS Tuning) ✅ I gave it a wash and wax 🔥:thumbsup: |
Originally Posted by ECSTuning
(Post 4295434)
You are welcome. Looks great :thumbsup::thumbsup::thumbsup: Juts that lower lip improves the whole front end.
Originally Posted by 808keith
(Post 4295466)
Looks good man! That JCW lip spoiler totally changes the look of the countryman. I have the JB+ as well as a place holder until I have the parts ready for the Manic Stage2... Just need an intercooler now.
|
Originally Posted by AWD_Rally
(Post 4295273)
There should've been a little gain in low end response since its a lot smoother now, but with the stock tune it may not feel like much. Definitely not going to gain power from this mod. The major difference with this is when you tune your engine and raise your boost, response tends to be much much better.
|
Some things are starting to pile up
|
Originally Posted by Sall4Ken
(Post 4291576)
I actually went through ECS it looks like they offer the same price point its possible it has MAP (minimum advertised price) so vendors generally have the same price. ECS offered free shipping on the competition not sure that wagner does...
Do you have a full on front shot? I think i like it but need to see more. I think it would look good with my red and black but i would need to black out the chrome rings. |
Deleted and started over
|
I turned off a highway onto a gravel road which turned into a grass path. I was going back to see that old steel bridge. Yes, I still need to wax the car to get rid of the shadows of the red stripes I removed in March. I traded a Toyota FJ for this countryman and love the car.
https://cimg9.ibsrv.net/gimg/www.nor...a77b005778.jpg |
Congrats on the new CM, black is a hard car to get the swirl marks out of.
|
Originally Posted by ECSTuning
(Post 4297414)
Congrats on the new CM, black is a hard car to get the swirl marks out of.
Right now I like the black look but may go back to stripes sometime. |
Just picked up a 2012 CMS All4 w only 10k miles on it!
This is my first mini. I've always wanted a mini. I've been looking at them and saw this deal and had to jump on it. I wanted a 2 door but I had to go with a CM due to the bear/dog I have (135lb American Akita). I am liking the CM more and more though. The ground clearance and size is definitely a plus! Anyway, I have had it for 3 weeks now and just got the stripes done. Window tint is scheduled for this Friday. Going with 65% on the front doors, 5% for the back doors, 25% or 50% for the hatch glass, and a 4" 25% stripe across the windshield. just ordered upgraded front cupholders decided to go with a checkered flag theme bc I don't think much else will go with "light coffee". I just ordered checkered flag lower steering wheel piece, checkered paddle shifter "buttons," and the "S" start button It has silver/gray around the dash vents and the "mickey mouse." I want to do these dash pieces in black but just the center accent piece is $300+ from mini! Might just have them painted instead. I was kind of annoyed that it already had that ugly front plate holder on it. The holes are already there, so I will probably get some sort of mini vanity plate. Also not a fan of the chrome. Still contemplating blacking it all out, including the black inserts for the headlights. I'm excited to make this mini mine! $$$$$$$! Ignore the pollen all over the hood. Spring in West Michigan is crazy! https://cimg4.ibsrv.net/gimg/www.nor...976add29bb.jpg https://cimg6.ibsrv.net/gimg/www.nor...75bcf3a5a9.jpg |
Originally Posted by BlakeC
(Post 4298593)
Just picked up a 2012 CMS All4 w only 10k miles on it!
This is my first mini. I've always wanted a mini. I've been looking at them and saw this deal and had to jump on it. I wanted a 2 door but I had to go with a CM due to the bear/dog I have (135lb American Akita). I am liking the CM more and more though. The ground clearance and size is definitely a plus! Anyway, I have had it for 3 weeks now and just got the stripes done. Window tint is scheduled for this Friday. Going with 65% on the front doors, 5% for the back doors, 25% or 50% for the hatch glass, and a 4" 25% stripe across the windshield. just ordered upgraded front cupholders decided to go with a checkered flag theme bc I don't think much else will go with "light coffee". I just ordered checkered flag lower steering wheel piece, checkered paddle shifter "buttons," and the "S" start button It has silver/gray around the dash vents and the "mickey mouse." I want to do these dash pieces in black but just the center accent piece is $300+ from mini! Might just have them painted instead. I was kind of annoyed that it already had that ugly front plate holder on it. The holes are already there, so I will probably get some sort of mini vanity plate. Also not a fan of the chrome. Still contemplating blacking it all out, including the black inserts for the headlights. I'm excited to make this mini mine! $$$$$$$! Ignore the pollen all over the hood. Spring in West Michigan is crazy! https://cimg4.ibsrv.net/gimg/www.nor...976add29bb.jpg https://cimg6.ibsrv.net/gimg/www.nor...75bcf3a5a9.jpg Also, ECS and Mini Parts have the black out light rings pretty inexpensive |
Originally Posted by MannyJimenez
(Post 4299133)
Loving the chocolate color. The cup holders was also the First thing I change
Also, ECS and Mini Parts have the black out light rings pretty inexpensive |
3 Attachment(s)
Finally got everything together. Hadn't posted pics before because everything was kind of being done at the same time. Just washed/waxed her up and took a couple pics.
KW V3 Coilovers Hotchkis rear control arms Milltek cat back exhaust with black MBRP tips Flat black vinyl wrapped head/tail light rings ECS Black Line Tail Lights Outmotoring Smoked Side Markers Outmotoring Smoked Scuttle Turn Signals Joey Mod Head lights Outmotoring LED Driving Lights Enkei T6S 18x8 et42 Wheels Continental ExtremeContact Sport 235/40R18 The hood isn't really debadged. The emblem is off right now, but I used a bit of photoshop to cover up the holes for the sake of the picture. lol. I'm going to order a new hood emblem soon. Attachment 193903 Attachment 193904 Attachment 193905 |
Looks fantastic!! Great job. I'm really digging the wheels. Tirerack only seems to have the T6S in Silver. Where did you get the bronze color?
|
Got the tint done a few days ago. Also washed and waxed since the last photos... much better without a coating of pollen!
I ended up going with 5% on the rear side windows, 15% on the rear hatch window, 15% on the stripe across the windshield, and 50% on the front side windows. The cops are pretty bad around here and made us remove the tint on my wife's focus bc her front windows were too dark, so I thought I'd play it safe. Still like it MUCH better than no tint! https://cimg0.ibsrv.net/gimg/www.nor...daea76a82f.jpg https://cimg5.ibsrv.net/gimg/www.nor...78d6d534a9.jpg https://cimg6.ibsrv.net/gimg/www.nor...0e0da5b0a1.jpg |
Originally Posted by potxoli
(Post 4299852)
Looks fantastic!! Great job. I'm really digging the wheels. Tirerack only seems to have the T6S in Silver. Where did you get the bronze color?
The color is a custom job. I was shooting for the Volk bronze color. They turned out quite a bit darker, but I think I like it even more. |
Originally Posted by HasAnMTBProblem
(Post 4299772)
Finally got everything together. Hadn't posted pics before because everything was kind of being done at the same time. Just washed/waxed her up and took a couple pics.
KW V3 Coilovers Hotchkis rear control arms Milltek cat back exhaust with black MBRP tips Flat black vinyl wrapped head/tail light rights ECS Black Line Tail Lights Outmotoring Smoked Side Markers Outmotoring Smoked Scuttle Turn Signals Joey Mod Head lights Outmotoring LED Driving Lights Enkei T6S 18x8 et42 Wheels Continental ExtremeContact Sport 235/40R18 The hood isn't really debadged. The emblem is off right now, but I used a bit of photoshop to cover up the holes for the sake of the picture. lol. I'm going to order a new hood emblem soon. https://i.imgur.com/LweQHk6.jpg https://i.imgur.com/89zLDXb.jpg https://i.imgur.com/qNOPm8Q.jpg |
Finally got around to installing the Crap Industries 2 inch lift on my 2012 CM All4. The fronts are done (its pretty darn cool looking) and the rears with sway bar will be put on this week. 20mm spacers all around bring out the wheels a bit as well. Will post pics once all done. :thumbsup:
|
Originally Posted by HasAnMTBProblem
(Post 4299772)
Finally got everything together. Hadn't posted pics before because everything was kind of being done at the same time. Just washed/waxed her up and took a couple pics.
KW V3 Coilovers Hotchkis rear control arms Milltek cat back exhaust with black MBRP tips Flat black vinyl wrapped head/tail light rights ECS Black Line Tail Lights Outmotoring Smoked Side Markers Outmotoring Smoked Scuttle Turn Signals Joey Mod Head lights Outmotoring LED Driving Lights Enkei T6S 18x8 et42 Wheels Continental ExtremeContact Sport 235/40R18 The hood isn't really debadged. The emblem is off right now, but I used a bit of photoshop to cover up the holes for the sake of the picture. lol. I'm going to order a new hood emblem soon. for $300 id probably get something like this https://www.waymotorworks.com/led-ta...ryman-r60.html |
Originally Posted by Crazy Airborne
(Post 4299915)
First Ive heard of these Black Line Tail Lights, do you happen to have a pic of them compared to the stock ones? The pics on ECS dont really make it look much different, are they noticiably darker? seems pretty pricey otherwise.
for $300 id probably get something like this https://www.waymotorworks.com/led-ta...ryman-r60.html |
They are here and are dark vs stock. Also, they come with the outside rings in black. Maybe those pics will help.
https://www.northamericanmotoring.co...and-rings.html |
Originally Posted by ECSTuning
(Post 4299919)
They are here and are dark vs stock. Also, they come with the outside rings in black. Maybe those pics will help.
https://www.northamericanmotoring.co...and-rings.html Id love to see a side by side comparison. |
Originally Posted by Crazy Airborne
(Post 4299915)
First Ive heard of these Black Line Tail Lights, do you happen to have a pic of them compared to the stock ones? The pics on ECS dont really make it look much different, are they noticiably darker? seems pretty pricey otherwise.
for $300 id probably get something like this https://www.waymotorworks.com/led-ta...ryman-r60.html |
Originally Posted by HasAnMTBProblem
(Post 4299772)
...
Enkei T6S 18x8 et42 Wheels Continental ExtremeContact Sport 235/40R18 ... [IMG]https://i.imgur.com/LweQHk6.jpg[IMG] [IMG]https://i.imgur.com/89zLDXb.jpg[IMG] [IMG]https://i.imgur.com/qNOPm8Q.jpg[IMG] |
All times are GMT -7. The time now is 08:29 AM. |
© 2024 MH Sub I, LLC dba Internet Brands