R59 just starting to mod my r59 please help
#1
just starting to mod my r59 please help
Hello fellow roadsters. I wanted to say Hi and also have a few questions for you guys.
I want to start modding my roadster s and was thinking of starting with the NM air charge pipe and the NM discharge pipe. Then also getting the Forge alloy intercooler. Possibly the NM oil catch can too.
Do you guys think is a good starting point or should i start in another direction?
Thank you everyone and thank you for your replies.
I want to start modding my roadster s and was thinking of starting with the NM air charge pipe and the NM discharge pipe. Then also getting the Forge alloy intercooler. Possibly the NM oil catch can too.
Do you guys think is a good starting point or should i start in another direction?
Thank you everyone and thank you for your replies.
#3
#4
If your Roadster is a MCS you have a N18 motor. You would need to have a 2012 JCW to not have one. The torque arm insert stops your engine from moving around. Helps with shifting and will give a better feel, also it's cheap. The BMS JB+ is a tune that plugs into your MAF and tricks your engine into having more boost, HP, and torque
#7
MAF = Mass Air Flow sensor (http://en.wikipedia.org/wiki/Mass_flow_sensor). Measures the amount of air going into the engine so the computer can calculate how much fuel to inject.
The JB+ connects in-line in the wiring between this sensor and the computer.
The JB+ connects in-line in the wiring between this sensor and the computer.
Trending Topics
#9
Vendor
iTrader: (10)
Like jkapinos said the NM torque arm bushing is the perfect first mod.
http://www.waymotorworks.com/nm-engi...nt-insert.html
After that it will depend on your goals. Please feel free to give us a call and we'll work with you on putting together parts to fit what you want.
For power a Forge intercooler is a perfect start that won't void your warranty.
But for handling an Hsport Comp rear sway bar is the best bang for the buck.
http://www.waymotorworks.com/nm-engi...nt-insert.html
After that it will depend on your goals. Please feel free to give us a call and we'll work with you on putting together parts to fit what you want.
For power a Forge intercooler is a perfect start that won't void your warranty.
But for handling an Hsport Comp rear sway bar is the best bang for the buck.
The following users liked this post:
BlueCooperS (06-17-2017)
#10
#11
#12
#14
If your Roadster is a MCS you have a N18 motor. You would need to have a 2012 JCW to not have one. The torque arm insert stops your engine from moving around. Helps with shifting and will give a better feel, also it's cheap. The BMS JB+ is a tune that plugs into your MAF and tricks your engine into having more boost, HP, and torque
So your saying a '12 jcw roadster has the N14 motor?
Thanks
#16
#17
Like jkapinos said the NM torque arm bushing is the perfect first mod.
http://www.waymotorworks.com/nm-engi...nt-insert.html
After that it will depend on your goals. Please feel free to give us a call and we'll work with you on putting together parts to fit what you want.
For power a Forge intercooler is a perfect start that won't void your warranty.
But for handling an Hsport Comp rear sway bar is the best bang for the buck.
http://www.waymotorworks.com/nm-engi...nt-insert.html
After that it will depend on your goals. Please feel free to give us a call and we'll work with you on putting together parts to fit what you want.
For power a Forge intercooler is a perfect start that won't void your warranty.
But for handling an Hsport Comp rear sway bar is the best bang for the buck.
The following users liked this post:
WayMotorWorks (06-18-2017)
#18
Vendor
iTrader: (10)
If you want power do the intercooler first, and then we can do a tune for you as those will be the best bang for the buck mods for you.
The following users liked this post:
BlueCooperS (06-22-2017)
#19
Hi, I also own R59s, and as recommended by many others from here, I have JB+ and NM Torque arm insert on my car.
Dude, with NM TAI, your car will be totally different one when you put it on sport mod, and try to accelerate when you are stopped. It shoots out without any hesitation.
Here is a video I uploaded on youtube for idling engine. You may not see the big difference from the video, but for sure it's worth of money.
Dude, with NM TAI, your car will be totally different one when you put it on sport mod, and try to accelerate when you are stopped. It shoots out without any hesitation.
Here is a video I uploaded on youtube for idling engine. You may not see the big difference from the video, but for sure it's worth of money.
#20
Will all facelift intercoolers fit a 2011/2 n14 jcw roadster
Seems a lot are sold as pre or upto 2010 (assuming general N18 upgrade)
I'm keeping my eye out for a second hand one and have already missed out on a forge and evolve, if I miss out by mid summer I might end up with something Unbranded from China
I'm looking to buy cheap in this area and support with a aquamist hfs4,
My rationale being this will give a better bang for buck than a top level intercooler and perhaps no budget left even for a Point and squirt kit
Seems a lot are sold as pre or upto 2010 (assuming general N18 upgrade)
I'm keeping my eye out for a second hand one and have already missed out on a forge and evolve, if I miss out by mid summer I might end up with something Unbranded from China
I'm looking to buy cheap in this area and support with a aquamist hfs4,
My rationale being this will give a better bang for buck than a top level intercooler and perhaps no budget left even for a Point and squirt kit
#21
Will all facelift intercoolers fit a 2011/2 n14 jcw roadster
Seems a lot are sold as pre or upto 2010 (assuming general N18 upgrade)
I'm keeping my eye out for a second hand one and have already missed out on a forge and evolve, if I miss out by mid summer I might end up with something Unbranded from China
I'm looking to buy cheap in this area and support with a aquamist hfs4,
My rationale being this will give a better bang for buck than a top level intercooler and perhaps no budget left even for a Point and squirt kit
Seems a lot are sold as pre or upto 2010 (assuming general N18 upgrade)
I'm keeping my eye out for a second hand one and have already missed out on a forge and evolve, if I miss out by mid summer I might end up with something Unbranded from China
I'm looking to buy cheap in this area and support with a aquamist hfs4,
My rationale being this will give a better bang for buck than a top level intercooler and perhaps no budget left even for a Point and squirt kit
Thread
Thread Starter
Forum
Replies
Last Post
igzekyativ
MINIs & Minis for Sale
34
07-16-2020 12:54 PM
ECSTuning
Vendor Announcements
0
08-19-2015 12:51 PM