R58 JCW Exterior Bodyparts
#1
JCW Exterior Bodyparts
Hello!
I’ve just pulled the plug on a 2013 R58 Cooper S today.. Shes a manual with around 44k kms. This car will be a project car with big Long term plans as I won’t be using it for a daily driver.
I would like to find out if the R56 and R58 front and rear
bumpers are identical.
I would like to have this Cooper S look like the JCW. From initial looks, it’s the front bumper, rear bumper & diffuser and sideskirts? What other items differ cosmetically from the Cooper S to the JCW on the R58?
Is there also an independent parts shop that can order these items in and ship them to Australia so I don’t have to order them at bmw/mini which will cost a bomb..
Thank you in advance for all your inputs! I would like very much to share my build journey on this site here.
I have owned a R58 JCW steptronic before and have never forgotten the car once it left me. Looking forward to starting the journey again and more!
I’ve just pulled the plug on a 2013 R58 Cooper S today.. Shes a manual with around 44k kms. This car will be a project car with big Long term plans as I won’t be using it for a daily driver.
I would like to find out if the R56 and R58 front and rear
bumpers are identical.
I would like to have this Cooper S look like the JCW. From initial looks, it’s the front bumper, rear bumper & diffuser and sideskirts? What other items differ cosmetically from the Cooper S to the JCW on the R58?
Is there also an independent parts shop that can order these items in and ship them to Australia so I don’t have to order them at bmw/mini which will cost a bomb..
Thank you in advance for all your inputs! I would like very much to share my build journey on this site here.
I have owned a R58 JCW steptronic before and have never forgotten the car once it left me. Looking forward to starting the journey again and more!
Last edited by Kenny Woo; 07-15-2019 at 08:42 AM.
The following users liked this post:
Dantastic (08-03-2019)
#2
Hello and congrats.
We can ship down under 3/2012+ R56 is the same as the factory JCW R58. They changed the design of the front bumper a little with the bottom. I heard the Aero II kit works fine also.
R58 JCW owner and past R56 MCS owner here.
We can ship down under 3/2012+ R56 is the same as the factory JCW R58. They changed the design of the front bumper a little with the bottom. I heard the Aero II kit works fine also.
R58 JCW owner and past R56 MCS owner here.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#4
I have typed a message before this but it seems to have disappeared when I attached a picture!
A big thanks for all the quick responses! Appreciate it very much.
@ECSTuning could I please get an email address or some contact details? Thanks!
This is my former JCW when I lived in Malaysia! 2013 with Steptronic.
This is the one I’ve just committed to here in Kangarooland. Expect to pick her up in a couple of days..
Basically id like to get the new one looking like the old one.. 😁
the parts i would need to swap would seem to be
front bumper
rear bumper
diffuser
side skirts
please correct me if I’m wrong
Much thanks for the quick response once again! Getting very excited for this new journey.. (or old journey again?) haha
A big thanks for all the quick responses! Appreciate it very much.
@ECSTuning could I please get an email address or some contact details? Thanks!
This is my former JCW when I lived in Malaysia! 2013 with Steptronic.
This is the one I’ve just committed to here in Kangarooland. Expect to pick her up in a couple of days..
Basically id like to get the new one looking like the old one.. 😁
the parts i would need to swap would seem to be
front bumper
rear bumper
diffuser
side skirts
please correct me if I’m wrong
Much thanks for the quick response once again! Getting very excited for this new journey.. (or old journey again?) haha
Last edited by Kenny Woo; 07-15-2019 at 06:28 PM.
#5
#7
Thanks for the responses! I had typed 2 messages prior to this but it seems to not have been posted..
my previous 2013 JCW Steptronic when I was living in Malaysia!
The one I’ve just committed to here in Australia...
I would basically want to get the new one looking like the old one.. I am still very much taken by the looks of the JCW..
seems i I would need to replace
front bumper
rear bumper and GP diffuser
side skirts
would that make the complete set?
@ECSTuning could I get an email so we can start the dialogue on these parts?
thanks again and I look forward to sharing my build as it progresses! Think forged pistons, rods, new cams!
my previous 2013 JCW Steptronic when I was living in Malaysia!
The one I’ve just committed to here in Australia...
I would basically want to get the new one looking like the old one.. I am still very much taken by the looks of the JCW..
seems i I would need to replace
front bumper
rear bumper and GP diffuser
side skirts
would that make the complete set?
@ECSTuning could I get an email so we can start the dialogue on these parts?
thanks again and I look forward to sharing my build as it progresses! Think forged pistons, rods, new cams!
Trending Topics
#8
thank you!
#9
It seems my posts needed to be approved by a moderator as I attached photos perhaps?
Nonetheless the good folks at ECS have emailed me and I look forward to moving this project!
Thanks again for all the responses!
i will post back with the photos and progress once I start kicking with it. I see the workshop tomorrow for the mechanical side of things
Nonetheless the good folks at ECS have emailed me and I look forward to moving this project!
Thanks again for all the responses!
i will post back with the photos and progress once I start kicking with it. I see the workshop tomorrow for the mechanical side of things
#10
" I have typed a message before this but it seems to have disappeared when I attached a picture!
A big thanks for all the quick responses! Appreciate it very much.
ECSTuning could I please get an email address or some contact details? Thanks!
This is my former JCW when I lived in Malaysia! 2013 with Steptronic.
Image:
This is the one I’ve just committed to here in Kangarooland. Expect to pick her up in a couple of days..
Image:
Basically id like to get the new one looking like the old one.. ��
the parts i would need to swap would seem to be
front bumper
rear bumper
diffuser
side skirts
please correct me if I’m wrong
Much thanks for the quick response once again! Getting very excited for this new journey.. (or old journey again?) haha"
I reposted it for you. You can contact me via PM for a list or you can contact our sales.
A big thanks for all the quick responses! Appreciate it very much.
ECSTuning could I please get an email address or some contact details? Thanks!
This is my former JCW when I lived in Malaysia! 2013 with Steptronic.
Image:
This is the one I’ve just committed to here in Kangarooland. Expect to pick her up in a couple of days..
Image:
Basically id like to get the new one looking like the old one.. ��
the parts i would need to swap would seem to be
front bumper
rear bumper
diffuser
side skirts
please correct me if I’m wrong
Much thanks for the quick response once again! Getting very excited for this new journey.. (or old journey again?) haha"
I reposted it for you. You can contact me via PM for a list or you can contact our sales.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Thread
Thread Starter
Forum
Replies
Last Post
REHATLGA
Stock Problems/Issues
12
05-20-2020 11:16 PM
amazingrando
How to
8
08-15-2014 04:31 PM
scott48
All other MINI parts and items for Sale (archive)
3
07-23-2007 11:20 PM