R58 OEM MINI LED DRL's installed!
#101
Looks like CinderFPV just posted a response, but i dont see anything here?
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#102
Now it looks like it poped up. Must have been delayed, thanks for the update and glad you got it figured out.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#103
-Lights On: Crescent
-Parking Lights: Crescent
-Off: Halo
-Fogs: Crescent
Any ideas?
Thanks!
#104
Hello,
For technical stuff just shoot me a PM as email can get backed up with all the emails we get. Sounds like you have not hooked up the fog part rigt, MINI made a mistake and flipped the PDF around. We attached an updated and corrected one to the product, here it is and double check your work. Most of the time its a wire flipped.
http://bd8ba3c866c8cbc330ab-7b26c6f3...NI_LED_DRL.pdf
For technical stuff just shoot me a PM as email can get backed up with all the emails we get. Sounds like you have not hooked up the fog part rigt, MINI made a mistake and flipped the PDF around. We attached an updated and corrected one to the product, here it is and double check your work. Most of the time its a wire flipped.
http://bd8ba3c866c8cbc330ab-7b26c6f3...NI_LED_DRL.pdf
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#105
Ok, so the plot thickens. I checked the fog light wiring per the 'updated' wiring diagrams from the instructions and the left side (driver) looks correct. I then checked the right (passenger) side and this is what I found. The enclosed screenshot is from the updated wiring diagram:
We are looking at modules X769 (side marker-upper bulb connection) and X136 (fog light bulb connection). The color of the wires that are supposed to go to them are Yellow and Green respectively.
This is the yellow wire obviously. Notice how the pins are vertical
This is the green wire obviously. Notice how the pins are horizontal
This is unit X136 to the fog light bulb. Notice how the pin receiver is vertical
This is unit X769 to the side marker/upper bulb. Notice how the pin receiver is horizontal
So according to the "updated" wiring diagram I need to shove the round peg into the square hole and the square peg into the round hole? Any ideas?
We are looking at modules X769 (side marker-upper bulb connection) and X136 (fog light bulb connection). The color of the wires that are supposed to go to them are Yellow and Green respectively.
This is the yellow wire obviously. Notice how the pins are vertical
This is the green wire obviously. Notice how the pins are horizontal
This is unit X136 to the fog light bulb. Notice how the pin receiver is vertical
This is unit X769 to the side marker/upper bulb. Notice how the pin receiver is horizontal
So according to the "updated" wiring diagram I need to shove the round peg into the square hole and the square peg into the round hole? Any ideas?
#106
#107
ECS Tuning shows the kit as being discontinued.
However, there is a kit on Ebay listed by ECS Tuning:
https://www.ebay.com/itm/Genuine-MIN...MAAOSwDn5bRwS2
However, there is a kit on Ebay listed by ECS Tuning:
https://www.ebay.com/itm/Genuine-MIN...MAAOSwDn5bRwS2
#108
ECS Tuning shows the kit as being discontinued.
However, there is a kit on Ebay listed by ECS Tuning:
https://www.ebay.com/itm/Genuine-MIN...MAAOSwDn5bRwS2
However, there is a kit on Ebay listed by ECS Tuning:
https://www.ebay.com/itm/Genuine-MIN...MAAOSwDn5bRwS2
THANK YOU SO MUCH MAN! The tons of ebay listings made me crosseyed! #nicesave
#110
https://www.ecstuning.com/b-genuine-...d/63122338554/
#111
These are nla for the kit, its a error on ebay site and we sent it to them to fix it. We made our our in house kit Links to the one above on our site.
Thanks
So you can make your own kit here:
These are still there : https://www.ecstuning.com/b-genuine-...l/63122348833/ x 1
https://www.ecstuning.com/b-genuine-...h/63122348832/ x 2
Thanks
So you can make your own kit here:
These are still there : https://www.ecstuning.com/b-genuine-...l/63122348833/ x 1
https://www.ecstuning.com/b-genuine-...h/63122348832/ x 2
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Last edited by ECSTuning; 03-02-2021 at 10:54 AM.
#112
EDIT: Realized this is R58 specific channel. Moved this question to more general 2nd gen Electrical Modifications: https://www.northamericanmotoring.co...ml#post4612671
I have had the LED daytime running light retrofit kit (#63122338554) installed since 2015 and it was working fine until recently.
Just a few days ago I noticed the halo rings are not working any longer. No full circles when switch is in off position, no upper arch in other switch positions.
Fogs are working as expected, except no upper arch. Since both of lights exhibit the same behaviour I am not convinced it's the lights themselves.
Are there any fuses I need to check? Is it the control module gone bad?
Any advise it greatly appreciated!
I have had the LED daytime running light retrofit kit (#63122338554) installed since 2015 and it was working fine until recently.
Just a few days ago I noticed the halo rings are not working any longer. No full circles when switch is in off position, no upper arch in other switch positions.
Fogs are working as expected, except no upper arch. Since both of lights exhibit the same behaviour I am not convinced it's the lights themselves.
Are there any fuses I need to check? Is it the control module gone bad?
Any advise it greatly appreciated!
Last edited by maccoder; 02-07-2022 at 10:03 AM.
#113
Module sounds like for both to go bad, i would disconnect and reconnect everything also check the fuse that goes to that location in the LKM.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#115
Thanks, see it was that fuse.
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#116
Yes, thankfully the LEDs and control unit were fine. Needed to install new fuse holder since original one was damaged. Everything works again as expected now!
I love these DRLs. They give a totally new character to the car, so super happy they are back in working condition!
I love these DRLs. They give a totally new character to the car, so super happy they are back in working condition!
#117
Thats great!
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#118
Has anyone had a bulb go out on part of your LED DRLs? I can not remember 8 yrs ago when installing these if its a sealed unit or not and before taking the bumper off I want to be sure it is something that can be accessed. Also any idea the bulb styles and wattage etc on all the different lights? I know my halo on one side is out.
#119
#120
One of my halos went out after only 1 year, just outside the 12 month / 12,000 mile warranty
Verified it was the fog housing by plugging it into the other side harness, and operation was the same. After that, I coded my DRL's to the actual fog light, and ran it that way for the next 2 years, when I replaced them with some Ebay specials.
Verified it was the fog housing by plugging it into the other side harness, and operation was the same. After that, I coded my DRL's to the actual fog light, and ran it that way for the next 2 years, when I replaced them with some Ebay specials.
Thread
Thread Starter
Forum
Replies
Last Post
Interior/Exterior LED mirror puddle lights and LED interior reflector
11I1I1I
Interior/Exterior
3
12-11-2011 12:00 AM
Interior/Exterior I finally did it.. AUDI style LED on my MINI foglight
ngweibing
Interior/Exterior
41
04-16-2010 05:12 AM