R57 Restraint System Malfunction
#1
Restraint System Malfunction
Hi folks!
Looking at buying a 2012 r57, problem is - when you start it up an error comes on the screen stating "Restraint System Malfunction".
I'm a bit worried that if I buy the car, it's gonna cost me a few thousand to fix this issue.
I've looked around regarding this but don't see any fixes. Has anyone cured this seemingly common problem?
Thanks for any input!
T
Looking at buying a 2012 r57, problem is - when you start it up an error comes on the screen stating "Restraint System Malfunction".
I'm a bit worried that if I buy the car, it's gonna cost me a few thousand to fix this issue.
I've looked around regarding this but don't see any fixes. Has anyone cured this seemingly common problem?
Thanks for any input!
T
#3
In FL unfortunately....
i have coded my R53 for all of the extra functions using NCSExpert - but wasn't able to figure out turning off the airbag light that popped on thanks to me switching my seats out. On R53 you would do that in INPA, although I couldn't get it to work. How would I do it in NCSExpert for either of these cars?
Gonna try "Carly" Monday if the car is still there.
undortunately Carly doesn't work on R53, Sure looks easier than NCSExpert.
I haven't looked at the CARFAX yet, waiting to go back Monday. Guy says car was never in an accident / clean carfax.
T
#4
once you update the SpDaten of the airbag using WinKfp, you load NCS expert and do a Sg-codren. if you want to mess with the specific code lines, then you need to "read the module". Using NCS dummy, load the file and enable/disable what you want. once done, export the new code file into the "work" folder. then do sg-codren.