When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Polyurethane has a very low melting point (around 100C depending on mix), plus it is a thermoplastic and will soften as it reaches its melting point. Your poly hangers would probably melt.
Polyurethane has a very low melting point (around 100C depending on mix), plus it is a thermoplastic and will soften as it reaches its melting point. Your poly hangers would probably melt.
I used a hose clamp around each front hanger to lift up my exhaust to keep it from rubbing before I can get it welded together. Hose clamps can be adjusted too, so they might help with alignment/fitment if you ever have that trouble.