North American Motoring - R56 Please help mini won't start

North American Motoring (https://www.northamericanmotoring.com/forums/)

- R56 :: Hatch Talk (2007+) (https://www.northamericanmotoring.com/forums/r56-hatch-talk-2007-136/)

- - R56 Please help mini won't start (https://www.northamericanmotoring.com/forums/r56-hatch-talk-2007/295328-please-help-mini-wont-start.html)

Please help mini won't start

Car won't start is dead. Check beatery and beatery is fine hidden codes 931bh, 9314h, a3c3h, a3a9h.
ObdII code : P0131, P0132, P0012, P0131, P2251, P0130 please help:mad:

Welcome to the board,

A bit more information would be nice, does the car crank but not start or is it a no crank no start?

Background? When did the issue start, what were you doing and what was the weather like?

Quote:

Originally Posted by Camilo A Londono (Post 4140962)

Car won't start is dead. Check beatery and beatery is fine hidden codes 931bh, 9314h, a3c3h, a3a9h.
ObdII code : P0131, P0132, P0012, P0131, P2251, P0130 please help:mad:

P0012- Intake cam over retarded/ possible VANOS solenoid fault.
P0131- Mixture control sensor low voltage bank 1 sensor 1.
P0132- Mixture control sensor high voltage bank 1 sensor 1.
P2251- Mixture control sensor virtual earth, open circuit.
P0130- Again another mixture control fault, temperature implausibility.

Is the mixture control sensor plug full of oil? It sounds a lot like a failure we just had in the shop from oil ingress into the sensor.

Is the car in time? This can only be checked by a qualified tech with the proper timing blocks.