KW V2 Coilover Front Rubbing on 2010 MCS
Guys,
I searched on the forum but was hoping to get some clarity on the particular issue I am having after installing KW V2 Coilovers on my 2010 MCS. I'm running stock 17" S-Lite wheels (+48 offset) with 205/45/17 tires. What spacers do I need for the front so that the back of the front tires do not rub/hit against the KW springs? Plan to drop to about 1-2 finger gap. What's safe for clearance? 12mm spacers? Would I need any for the rear? I am also running a 19mm Hotchkis rear sway bar. Thanks. Denny |
Any help here would be much appreciated. Thanks.
|
|
Thanks. Looks like a 12mm spacer would work according to that thread.
Any particular brand you guys recommend? Or are they all about the same? |
Just make sure the spacer is hub-centric and use proper length bolts.
|
All times are GMT -7. The time now is 09:55 PM. |
© 2024 MH Sub I, LLC dba Internet Brands