So I did not retrofit but had the headlights replaced.

Long sad story (Sort of, but not really)

Since having them replaced they point at the ground about 15-20 ft in front of the car and thats where the cut off ends. Even though they are self leveling I feel there has to be some sort of manual adjustment, can someone tell me where this is?

Once they are installed there is a manual leveling. Its easier to do it on a flat level surface pointing towards a building of garage.

Leveling manual adjustment 25w Xenon kit.

https://www.northamericanmotoring.co...fit-kit-6.html

with the oem retrofit, can i still use high beam, or does it get disabled?

Hello,

The OEM lights are Bi Xenon, that means there is a a high and low beam combination, so yes you will have high and low beam Xenon's.

:thumbsup:

https://www.ecstuning.com/b-genuine-...63102347698kt/

https://c1552172.ssl.cf0.rackcdn.com/522529_x800.webp


Just an update, looks like we are the last to have these in the USA. Once we cant get them anymore they will be gone.