|
Anyone else's car do this, remote fob not pop trunk. Comfort access/alarm option
Hello everyone
I recently picked up my 2013 MCS yesterday and as I have been using the car this weekend I noticed the trunk won't pop using either of my remote fobs. Now my car has both the comfort access and the alarm option. If I lock/arm the car and just press the release button above the rear license plate the comfort access allows me to open it. The trunk release above the rear plate works as well with the car unlocked However either locked or unlocked the remote fob will not pop it open. I tried the 1 sec push as in the owners manual and it didn't work and If I hold the trunk release button on the fob it triggers the panic mode of the alarm. Is it because I have both comfort access and the alarm and now that feature is disabled on the remote? Again I tried this with both of my key fobs and nothing. Thanks |
Mine does the same thing. I have an '07 S with both alarm and comfort access. Would definitely like to know why this happens....
|
Originally Posted by Bob Saget
(Post 3667860)
Mine does the same thing. I have an '07 S with both alarm and comfort access. Would definitely like to know why this happens....
|
I've been able to do it two or three times since I bought my car. The rest of the time I just set the alarm off.
|
I think this was asked somewhere and the factory alarm replaces the hatch pop for the key fob. It's because of that panic alarm feature.
|
Originally Posted by Bob Saget
(Post 3667877)
I've been able to do it two or three times since I bought my car. The rest of the time I just set the alarm off.
Originally Posted by calforhelp
(Post 3667879)
I think this was asked somewhere and the factory alarm replaces the hatch pop for the key fob. It's because of that panic alarm feature.
|
My '12 MCS has comfort access and the alarm, and I can pop the hatch from the fob. It's more like a 2-second press & hold than the 1 sec. they say in the manual, but after about a week of setting of the alarm every time, I got the hang of it.
|
Weid. I just went and checked mine to see if I could solve anything. I also have comfort access and the factory alarm and have had this problem. I used to have a clubman, so I had to hold the boot button down until the barn door popped open, and, like the OP, I had the alarm go off. My recent attempt had the hatch open every time, locked or unlocked, if I held down the boot release button on the key fob for a second or so. I tried just giving it a press and letting go, but that didn't work, I actually had to hold it down for a second and then a second after I let go, it would pop open.
|
Scooter09, that's exactly how mine works -- I should have mentioned that it doesn't pop until you let go of the button. So if you just hold it down waiting for it to pop, the alarm will go off every time. You just have to hold for a sec. or two and let go, and then it will pop as soon as you let go of the button.
|
Hmm ill try that in the morning then. I did the 1 sec and nothing and got confused and then did the constant hold and the alarm sounds. I never trued the 2 sec hold and release.
|
No comfort access, but coded for factory alarm here, I have the same issue as you. It is like 2 seconds to get the trunk to pop, any less and nothing, any more and the alarm trips into panic mode. It normally takes me 2-3 tries to get it to pop when I take the MINI for quick grocery runs. I'm guessing the 2 second thing is intentional to prevent accidental pocket presses.
|
Artmem that worked! Thanks for clarifying the right sequence. Like said I have to get used to it because I did set the alarm off lol but it will pop open.
|
I tried this last night when I walked out to my car after work, it worked with not setting off the alarm. Push and hold the far right keyfob button w/pic. of Boot Door Open, heard a almost click sound and sure enough I was able to open the Boot.
|
Hey so here's an option I just found in NCS Expert. The option is described as "Pressing Remote Control Trunk Lid Button Stops Automatic Trunk Lid Opening With Comfort Access".
It's in the CAS module and it's listed as: Code:
HKL_LIFT_BEI_CANo guarantee that it'll work but it's worth trying. |
Originally Posted by calforhelp
(Post 3675885)
Hey so here's an option I just found in NCS Expert. The option is described as "Pressing Remote Control Trunk Lid Button Stops Automatic Trunk Lid Opening With Comfort Access".
It's in the CAS module and it's listed as: Code:
HKL_LIFT_BEI_CANo guarantee that it'll work but it's worth trying. Thank you tho for the info. |
Solved
If your MINI Cooper is equipped with factor alarm system, the truck release WILL NOT work while the vehicle is locked.
In order to open the hatch or truck in the case of the coupe and roadster (which I own) you need to unlock the vehicle first. Then press and hold the truck release button for 2-3 seconds. Once released the truck will pop open. If the vehicle is locked, and you have comfort access, the truck will not release as well. You must unlock the vehicle first. In the case of comfort access you can press the button on the driver and or passenger door. I know this sounds illogical but this is how it was designed by the crazy Germans. Once unlocked you can press the truck pad on the car or you can use the key fob. In a panic situation, you can press the truck icon on the key fob and it will sound the alarm because the button is defaulted to panic when the factory alarm is optioned on the vehicle. Hope this helps.
Originally Posted by M'Cooper
(Post 3667785)
Hello everyone
I recently picked up my 2013 MCS yesterday and as I have been using the car this weekend I noticed the trunk won't pop using either of my remote fobs. Now my car has both the comfort access and the alarm option. If I lock/arm the car and just press the release button above the rear license plate the comfort access allows me to open it. The trunk release above the rear plate works as well with the car unlocked However either locked or unlocked the remote fob will not pop it open. I tried the 1 sec push as in the owners manual and it didn't work and If I hold the trunk release button on the fob it triggers the panic mode of the alarm. Is it because I have both comfort access and the alarm and now that feature is disabled on the remote? Again I tried this with both of my key fobs and nothing. Thanks |
Originally Posted by M'Cooper
(Post 3667785)
Hello everyone
I recently picked up my 2013 MCS yesterday and as I have been using the car this weekend I noticed the trunk won't pop using either of my remote fobs. Now my car has both the comfort access and the alarm option. If I lock/arm the car and just press the release button above the rear license plate the comfort access allows me to open it. The trunk release above the rear plate works as well with the car unlocked However either locked or unlocked the remote fob will not pop it open. I tried the 1 sec push as in the owners manual and it didn't work and If I hold the trunk release button on the fob it triggers the panic mode of the alarm. Is it because I have both comfort access and the alarm and now that feature is disabled on the remote? Again I tried this with both of my key fobs and nothing. Holding the button for 2 seconds is probably one second longer than it will take me just to reach down and press the button. Thanks |
| All times are GMT -7. The time now is 09:07 PM. |
© 2026 MH Sub I, LLC dba Internet Brands