North American Motoring

North American Motoring (https://www.northamericanmotoring.com/forums/)
-   R56 :: Hatch Talk (2007+) (https://www.northamericanmotoring.com/forums/r56-hatch-talk-2007-136/)
-   -   R56 Glove Box Organizer doesn't seem to fit? (https://www.northamericanmotoring.com/forums/r56-hatch-talk-2007/125571-glove-box-organizer-doesnt-seem-to-fit.html)

ehart13169 Jan 13, 2008 12:33 AM

Glove Box Organizer doesn't seem to fit?
 
I just got a glove box organizer for my '07 MCS, and it doesn't seem to fit the glove box...a touch too wide. Is there a trick to putting this in, or am I missing something obvious? :confused:

goaljnky Jan 13, 2008 12:55 AM

Just force it in. Push hard.

ehart13169 Jan 13, 2008 01:11 AM

I will try that tomorrow...would I be correct in assuming it goes in so that the short tabs are against the top of the glove box?

Nimcosi Jan 13, 2008 06:37 AM


Originally Posted by ehart13169 (Post 1978826)
I just got a glove box organizer for my '07 MCS, and it doesn't seem to fit the glove box...a touch too wide. Is there a trick to putting this in, or am I missing something obvious? :confused:

It fits, but in a very particular way. The easiest way I found was to open the glovebox and remove the stuff inside (duh). Holding the unit with the divider on top and the tapered end facing you, flip the unit vertically so the divider faces the glove box front of the car. Now move it forward into the glovebox. The unit should need to be tilted (45 degrees or so) down towards you as it is placed into the glove box. Once placed, when you let go of it , the unit will lay flat on the glove box door and you can close it. However, you will need to adjust the contents of the glove box forward and backward to ensure it closes corrrectly. Honestly, while it does do a good job of keeping the glove box organized, the odd shape causes a bit more space loss than most people will be willing to accept. Still it works well for me.

kevshootz Jan 13, 2008 01:05 PM

I found the item to be worthless and even the dealer couldn't figure out a sure fit.

Minidrivr Jan 13, 2008 02:08 PM

Mine worked fine. Dropped right in. :confused:

https://www.northamericanmotoring.co...0&d=1197426603

1QukMINI Jan 13, 2008 02:16 PM

The SA here at my local dealer advised against buying the R56 organizer, saying it was not a good fit at all, and was not the best purchase.

ehart13169 Jan 13, 2008 07:08 PM

Still not able to get it to fit....push hard, or following the instructions from Nimcosi. Mine looks completely different than the one shown in the pic above though....looks like this:
http://www.hartautomotive.com/pics/h...ovebox_org.jpg
This is not a pic of mine, it is a pic I found on the web....doesn't look anything like the one I ordered. Did they send me the wrong one?

Minidrivr Jan 13, 2008 07:20 PM


Originally Posted by ehart13169 (Post 1980021)
Still not able to get it to fit....push hard, or following the instructions from Nimcosi. Mine looks completely different than the one shown in the pic above though....looks like this:
http://www.hartautomotive.com/pics/h...ovebox_org.jpg
This is not a pic of mine, it is a pic I found on the web....doesn't look anything like the one I ordered. Did they send me the wrong one?

That picture isn't a R56. The one in the pic I posted is the OEM model for a R56.

TheBigNewt Jan 13, 2008 07:24 PM

You guys actually paid money for that? I'm amazed.

Nimcosi Jan 13, 2008 07:27 PM


Originally Posted by Minidrivr (Post 1980048)
That picture isn't a R56. The one in the pic I posted is the OEM model for a R56.

Sorry my instructions were for the R56. :sad:

T-Horn67 Jan 13, 2008 07:42 PM

You should try the organizer from GoMiniGo. You can find them on the vendor list. I absolutely love mine!

Minidrivr Jan 13, 2008 08:56 PM


Originally Posted by TheBigNewt (Post 1980050)
You guys actually paid money for that? I'm amazed.

Technically I had to buy the car to get it, so yes I guess so.

Kelly Girl Jan 14, 2008 09:28 AM


Originally Posted by ehart13169 (Post 1978826)
I just got a glove box organizer for my '07 MCS, and it doesn't seem to fit the glove box...a touch too wide. Is there a trick to putting this in, or am I missing something obvious? :confused:

i cut mine down with a hacksaw... fits perfectly now!

Minidrivr Jan 14, 2008 04:00 PM


Originally Posted by Kelly Girl (Post 1980915)
i cut mine down with a hacksaw... fits perfectly now!

How about posting a picture to see where you cut it?

ehart13169 Jan 14, 2008 10:12 PM


Originally Posted by Nimcosi (Post 1980061)
Sorry my instructions were for the R56. :sad:

Mine is an R56. However, after looking at the different ones available, I bought it from Minspeed (they sell the GoMiniGo organizer), but it looks like they mistakenly sent me the one for the R53 instead of for the R56. :sad: I'm in the process of working that out with them now. That would explain why it doesn't fit! :)

Minidrivr Jan 15, 2008 04:48 AM


Originally Posted by ehart13169 (Post 1982381)
Mine is an R56. However, after looking at the different ones available, I bought it from Minspeed (they sell the GoMiniGo organizer), but it looks like they mistakenly sent me the one for the R53 instead of for the R56. :sad: I'm in the process of working that out with them now. That would explain why it doesn't fit! :)

No wonder it didn't fit! I like the glovebox on the R53 better than the R56.

The Meal Jan 15, 2008 07:53 AM

Stealing Minidrivr's picture, I make sure my OEM R56 organizer matches up with the indicated indentation prior to closing. That works for me. However, I'm not impressed with the OEM organizer, and think that T-horn's GoMiniGo suggestion is probably the better way to go.

http://www.the-meal.com/onlinepix/MI...xorganizer.jpg

~Neal

Minidrivr Jan 15, 2008 05:36 PM


Originally Posted by The Meal (Post 1982799)
Stealing Minidrivr's picture, I make sure my OEM R56 organizer matches up with the indicated indentation prior to closing. That works for me. However, I'm not impressed with the OEM organizer, and think that T-horn's GoMiniGo suggestion is probably the better way to go.~Neal

Why kind of material is the GoMiniGo one? I just recently pulled my out due to all those tiny fibers getting all over everything I put in there...but then I'm a little OCD. :eek2:

mini-rolls Jan 15, 2008 08:53 PM

Our GbT is ABS plastic and the flat areas covered with felt. We can also match the felt to the color of your car. Yellow Felt would look nice.

Minidrivr Jan 15, 2008 09:55 PM


Originally Posted by mini-rolls (Post 1984319)
Our GbT is ABS plastic and the flat areas covered with felt. We can also match the felt to the color of your car. Yellow Felt would look nice.

Does the felt "shed" like the OEM one?

mini-rolls Jan 16, 2008 09:57 AM


Originally Posted by Minidrivr (Post 1984407)
Does the felt "shed" like the OEM one?

Have not had any shedding issues. We buy a quality felt.

gokartride Jan 16, 2008 10:14 AM

My OEM glovebox organizers never had any shedding issues...this is my second (first on an '03, and now on my '07). I like the finished edges of the OEM unit and the elastic hold-downs are very useful given that the unit moves up and down with the glovebox door. That said, for me the secret of making it work was getting it centered. If mine wasn't centered it seemed to hit some internal part of the glovebox as I closed it. It's not a precision thing, but one I got it roughly centered it's worked great. I just use it all the time and never give it a second though which, afterall, is what you should do with a glovebox organizer. :nod:


All times are GMT -7. The time now is 07:23 AM.


© 2026 MH Sub I, LLC dba Internet Brands