Here’s a copy of a post from 10/26/19 elsewhere:
Drove the front up on Rhino ramps and put on some Ultra Racing chassis braces on this am. Lower front and lower mid. Feels a bit more solid on rough roads and a little quicker steering response on good roads. You have to take the plate under the mid exhaust off to put the mid brace’s back 4 bolts on, but it’s much more solid than the OEM plate that you remove. About 2-2.5” tall, but tucked up so I’m only losing a little more than an inch of ground clearance, and I’m not lowered, so no worries there. pics are a bit limited as not much room to get a good view on ramps. Note: I tried loading these pics several times, and each time it flipped the images upside down. Go figure...I give up. https://cimg3.ibsrv.net/gimg/www.nor...825d5cc1e.jpeg https://cimg5.ibsrv.net/gimg/www.nor...e6ba90189.jpeg https://cimg6.ibsrv.net/gimg/www.nor...add5c5f0e.jpeg https://cimg8.ibsrv.net/gimg/www.nor...0f44f6665.jpeg https://cimg9.ibsrv.net/gimg/www.nor...11a80b726.jpeg |
All times are GMT -7. The time now is 08:20 PM. |
© 2024 MH Sub I, LLC dba Internet Brands