North American Motoring

North American Motoring (https://www.northamericanmotoring.com/forums/)
-   R52 :: Cabrio Talk (2005-2008) (https://www.northamericanmotoring.com/forums/r52-cabrio-talk-2005-2008-152/)
-   -   R52 2007 Mini R52 Convertible bumper (https://www.northamericanmotoring.com/forums/r52-cabrio-talk-2005-2008/332387-2007-mini-r52-convertible-bumper.html)

RobSamek 10-11-2018 08:03 AM

2007 Mini R52 Convertible bumper
 
Hi to all my new friends! Just bought an 07 convertible. I had no idea how awesome minis were. I test drove one and fell in love immediately! Anyway. I have the non-sport version with the single exhaust cutout on the right for the tail pipe. I want to upgrade to the dual pipes in the center. Does anyone know which bumper if any is a direct fit. I'm thinking the R53 S but am not sure. Thanks!

RB-MINI 10-11-2018 09:37 AM

Welcome! For a direct fit you'll need a bumper from an '05 - '08 cabrio as they have slots in the bumper for the hinges. An R53 will possibly work if you cut the slots in the bumper.

If you go with a factory exhaust it'll also need to be for a cabrio as they have extra bracing under the car. The later JCW exhausts will fit an R52 S or R53 as they were changed when the cabrios came out. Not sure if the stock S exhaust was changed, or if it already fit both without changing.

RobSamek 10-11-2018 09:57 AM

Great Advice
 
Thanks RB-MINI! That helps a lot and certainly saved me a bunch of research time.

RB-MINI 10-11-2018 10:30 AM

You're welcome. Check with ECS Tuning as he knows a lot about the early cabrio's. He should be able to tell you if just cutting an R53 bumper will work, or if there are extra brackets or mounting tabs in that area, and which exhausts should work for your conversion.

Mineeee 10-11-2018 12:55 PM

Im also really enjoying my "new to me" first gen "Justa" convertible:)

You can probably figure out the correct OEM part numbers you will need for this project if you feed the last 7 digits of the VIN in here and then try the other engine (W11) option
http://www.realoem.com/bmw/enUS/select

Is it possible that its only the "spoiler" under the bumper that is "S" or Justa specific? Its not clear to me if these are interchangeable with the justa bumper or if the whole bumper needs to be swapped as well to accommodate the center pipe.

"Justa"
https://www.ecstuning.com/b-genuine-...r/51127127962/

"S"
https://www.ecstuning.com/b-genuine-...r/51126800234/

It seems a lot of hassle either way, for what it might end up costing Id rather swap out the exhaust header if the end result is anything like the HP boost claimed for a 2nd gen mini in a recent thread here:)

ECSTuning 10-12-2018 01:51 PM

^^ +1


All times are GMT -7. The time now is 08:51 PM.


© 2024 MH Sub I, LLC dba Internet Brands