North American Motoring

North American Motoring (https://www.northamericanmotoring.com/forums/)
-   R52 :: Cabrio Talk (2005-2008) (https://www.northamericanmotoring.com/forums/r52-cabrio-talk-2005-2008-152/)
-   -   R52 Top goes into "sunroof stage" but won't unlatch to go down (https://www.northamericanmotoring.com/forums/r52-cabrio-talk-2005-2008/262130-top-goes-into-sunroof-stage-but-wont-unlatch-to-go-down.html)

elyonrivers Dec 3, 2013 09:59 PM

Top goes into "sunroof stage" but won't unlatch to go down
 
FIRST POST.

I have a 2005 Mini Cooper convertible and it's convertible roof only goes until "sunroof stage". When I click the down roof button again, the windows go down, but the passanger side latch won't fully realase. Plus the driver's side latch has to be manually released. And through all this, the top up roof button just flashes red. Does anybody know why my roof won't fully unlatch? Does anybody know what the problem could be? Any help would be appreciated, thanks.

elyonrivers Dec 3, 2013 10:05 PM

.

Rodjockey Dec 4, 2013 07:30 AM

Check in the trunk to ensure the two latches are both locked down. These are the levers on the side that let you lift the back up

Fly'n Brick Dec 4, 2013 07:37 AM

1 Attachment(s)
Also, check the boot tray that it is all the way down and the wee foot on the driver's side is holding down the safety switch.

ECSTuning Dec 4, 2013 08:14 AM

Like said above, check the micro switch is making contact with the rear shelf and its in the correct position.

Here is a thread that I posted with more info and where to look.

https://www.northamericanmotoring.co...-position.html

If this still does not help. Then you will have to start looking at the front lower linkage. These can jam ( not slide ) or snap. at the plastic. Early 2005 convertible will not have the little pegs, if you have the older style, the pegs will just need filed down to install.

Convertible Top Front Linkage - Pair Part # 54347174763


http://www.ecstuning.com/Search/SiteSearch/54347174763/


http://c1552172.r72.cf0.rackcdn.com/237246_x600.jpg
http://c1552172.r72.cf0.rackcdn.com/237248_x600.jpg

Thanks and hope that helps.

elyonrivers Dec 4, 2013 08:48 AM

Thanks ECSTuning, that helps quite a bit. Now that I know what they are called (Front Linkage), I can address the problem correctly.

Well, the Front linkage on the passanger's side isn't fully unlinking. It'll go about halfway through the unlinking process and then it just stops right before I'm able to even manually pull it off. As for the driver's side linkage, I have to manually release it because the plastic snapped.

donnieronald Dec 21, 2013 01:44 AM

Thanks for sharing information,your information are very helpful for me and increase my knowledge.

ECSTuning Dec 23, 2013 07:22 AM

You are both welcome. :)

maytag Aug 10, 2020 12:21 PM


Originally Posted by ECSTuning (Post 3850086)
Like said above, check the micro switch is making contact with the rear shelf and its in the correct position.

Here is a thread that I posted with more info and where to look.

https://www.northamericanmotoring.co...-position.html

If this still does not help. Then you will have to start looking at the front lower linkage. These can jam ( not slide ) or snap. at the plastic. Early 2005 convertible will not have the little pegs, if you have the older style, the pegs will just need filed down to install.

Convertible Top Front Linkage - Pair Part # 54347174763

Thanks and hope that helps.

ECS, This describes PRECISELY a problem I'm experiencing. our '05 R52, driver's side latch broke (the plastic part). These are definitely the parts I need, but is there a tutorial somewhere detailing their installation? I'm a pretty good DIY-er, but I'll admit that the top on these things has kicked my butt more than once. haha. I'd really like to see how it was done before I just tear into it.

Fly'n Brick Aug 10, 2020 06:33 PM


Originally Posted by maytag (Post 4548854)
ECS, This describes PRECISELY a problem I'm experiencing. our '05 R52, driver's side latch broke (the plastic part). These are definitely the parts I need, but is there a tutorial somewhere detailing their installation? I'm a pretty good DIY-er, but I'll admit that the top on these things has kicked my butt more than once. haha. I'd really like to see how it was done before I just tear into it.

Recommend you contact ECS directly. This thread is 7 years old and they may not pick up on your request. If they do, good for them.

ECSTuning Aug 12, 2020 02:04 PM

I am here just hit me up i have an r52. Just saw this.

Info here on the front latch https://www.northamericanmotoring.co...tible-top.html

You pretty much just replace those in the front note" Early 2005 convertible will not have the little pegs, if you have the older style, the pegs will just need filed down to install."

DESUJIK May 21, 2022 02:04 AM

I generally dislike the rooftop on my 54 reg smaller than expected one. The sunroof returns, however at that point stops. Whenever I come to close it, there's a horrendous shrieking commotion coming from the back left. I've supplanted the pressure driven repository and the left hand side water powered slam. Value any thoughts. Good wishes.


192.168.100.1 192.168.1.1



All times are GMT -7. The time now is 10:50 AM.


© 2026 MH Sub I, LLC dba Internet Brands