Stock Problems/Issues Discussions related to warranty related issues and repairs, or other problems with the OEM parts and software for MINI Cooper (R50), Cabrio (R52), and Cooper S (R53) MINIs.

Evap emissions P0456

Thread Tools
 
Search this Thread
 
  #1  
Old 03-28-2017, 05:33 PM
coopermike29's Avatar
coopermike29
coopermike29 is offline
3rd Gear
Thread Starter
Join Date: Jul 2016
Posts: 218
Likes: 0
Received 10 Likes on 10 Posts
Evap emissions P0456

2006 R50 auto . 87,000 miles

The Mini sat for a couple weeks.

Started right up...service engine light came on. ( stayed on)

OBD reader stated " Evaporative Emissions VERY small leak".

Does anyone have any idea what it could be/ is ?

Appreciate any and all help
 
  #2  
Old 03-28-2017, 08:55 PM
Minnie.the.Moocher's Avatar
Minnie.the.Moocher
Minnie.the.Moocher is offline
OVERDRIVE
Join Date: Jun 2014
Location: earth PNW
Posts: 5,390
Received 570 Likes on 486 Posts
More often than not, gas cap seal is shot. If it's original buy a new one. $22 15000 miles ago never had the issue again.
 
  #3  
Old 03-30-2017, 06:16 AM
coopermike29's Avatar
coopermike29
coopermike29 is offline
3rd Gear
Thread Starter
Join Date: Jul 2016
Posts: 218
Likes: 0
Received 10 Likes on 10 Posts
Thanks minnie!!!

Was you gas cap cracked ? Could you SEE where it was worn ?

Or just that the seal is too soft/worn to " seat" properly ?


Did you get an OEM gas cap ?


Thanks again for your input
 
  #4  
Old 03-31-2017, 11:40 AM
coopermike29's Avatar
coopermike29
coopermike29 is offline
3rd Gear
Thread Starter
Join Date: Jul 2016
Posts: 218
Likes: 0
Received 10 Likes on 10 Posts
I checked the gas cap. The rubber seal has more splits than rubber almost.

Picked up an OEM gas cap at the dealer today!!!

Hopefully should fix
Thanks again MM

Michael
 
  #5  
Old 03-31-2017, 02:29 PM
Minnie.the.Moocher's Avatar
Minnie.the.Moocher
Minnie.the.Moocher is offline
OVERDRIVE
Join Date: Jun 2014
Location: earth PNW
Posts: 5,390
Received 570 Likes on 486 Posts
My gas cap looked to be in good shape, but obviously the rubber wasn't sealing perfectly. If yours was split than 99.9% chance that was it. Might have to run a few drive cycles for the code to go away, although mine went off immediately.
 




All times are GMT -7. The time now is 09:29 PM.