Keith's Run, Mt. Hamilton photos
Originally Posted by Califzeph
Geez, I'm embarrassing myself... please try this link for my movie:
http://rosevillepointenw.org/MINIrun02-12-06.mov
http://rosevillepointenw.org/MINIrun02-12-06.mov
This worked for me. Awesome!! A little video editing too.
Too bad it's missing the part between the fire truck and the pub. I wanted to relive that incredible road.
thanks for all the efforts,
francois
Originally Posted by goldcountrymini
Do you need a place to host this?

I pay for the space on the place it's at now...
Originally Posted by francois
This worked for me. Awesome!! A little video editing too.
Too bad it's missing the part between the fire truck and the pub. I wanted to relive that incredible road.
thanks for all the efforts,
francois
Too bad it's missing the part between the fire truck and the pub. I wanted to relive that incredible road.
thanks for all the efforts,
francois
Califzeph,
I just got the camera mount. It works great. Easy to install. I was sooooo busy driving that I never had time to start the video cam. I'll psot some photos and where I got it tomorrow.
I just got the camera mount. It works great. Easy to install. I was sooooo busy driving that I never had time to start the video cam. I'll psot some photos and where I got it tomorrow.
Originally Posted by francois
Hello Yumhaggis, We spoke briefly and I got some shots of your car. Yours was one of my favorite cars of the the day. Highly modified yet very clean! Nice family logo too!!
Thank you for not sporting a kilt and sharing some haggis.
francois
Thank you for not sporting a kilt and sharing some haggis.
francois
Originally Posted by mini pooper
RBender,
If you have someone with you, keep the front plate under the floor mat. If you see anything with red lights on top, pull the plate out and place it on the dash. The law says it has to be visable, not more than 60 above the ground, and fastened so that it won't wave/wobble. This covers most of your problem.
If you want to mount your plate Howard Canfield has a great little setup.
Otherwise fasten your front plate to the passenger side shade, and flip it down as necessary.
If you have someone with you, keep the front plate under the floor mat. If you see anything with red lights on top, pull the plate out and place it on the dash. The law says it has to be visable, not more than 60 above the ground, and fastened so that it won't wave/wobble. This covers most of your problem.
If you want to mount your plate Howard Canfield has a great little setup.
Otherwise fasten your front plate to the passenger side shade, and flip it down as necessary.
Thanks for the information. I will try it out.
Califzeph,
Here is the link for the camera mounts: www.ufmotorsport.com/cameramounts.htm
I got the 18.12-0011 BMW Mini Cooper Camera Mount for $109.95.
The mount is simple to install, looks great and works! It's clear plastic and comes with all the stuff you need.
I am happy with mine.
Here is the link for the camera mounts: www.ufmotorsport.com/cameramounts.htm
I got the 18.12-0011 BMW Mini Cooper Camera Mount for $109.95.
The mount is simple to install, looks great and works! It's clear plastic and comes with all the stuff you need.
I am happy with mine.
Originally Posted by yumhaggis
Thanks Francois, I didn't know you were on mtbr my son was at the run as well he drove my 67 Austin Mini 850 he's big time into mtbr too. You can also check him out at dirtybobbysbikes.com, you can see some of the bikes we have together as well. Your photos are abfab, and watch out you never know when we'll show up Big Bad and in Plaid. 

So you got an old and a new Mini and both were in the run. We're not worthy!
francois
Originally Posted by francois
Wow, that's unreal. dansjustchillin is your son? I read his posts on mtbr but haven't actually met him. I checked his site and he lives and breathes bikes like me. He's got all the cycling disciplines covered. I'd like to meet him someday.
So you got an old and a new Mini and both were in the run. We're not worthy!
francois
So you got an old and a new Mini and both were in the run. We're not worthy!
francois
Thread
Thread Starter
Forum
Replies
Last Post
noqmansan
1st Gear
17
Dec 1, 2016 03:53 PM



