Are BMW headunits convertible to Mini by coding
Hi Miniacs,
I am going through the upgrade of my simple boring Visual Boost (thanks god it is boosted) to a NBT EVO High with Carplay support. I have seen in an eBay listing that the seller claims that a HU is for both Minis and BMWs. I asked the question and he said that they are compatible, you just need to code for one or other brand. Does anyone here know if this is true? Can I just pick the latest BMW ID5 or ID6 HU and just code to Mini? That would be awesome, as there is plenty of options of BMW and less for Mini. I will dig on my own as well, but should any of you guys have experience or knowledge on this I will appreciate. Regards from Catalonia! Joan. |
Yes, I had a BMW ID5/6 headunit coded to work with my F56. It fits and works flawlessly. Be careful about the GPS port though. Most newer BWM units don't have the blue GPS port and you'd need an ATM emulator.
|
Originally Posted by markbam
(Post 4448624)
Yes, I had a BMW ID5/6 headunit coded to work with my F56. It fits and works flawlessly. Be careful about the GPS port though. Most newer BWM units don't have the blue GPS port and you'd need an ATM emulator.
|
|
That is awesome. Probably a budget buster for my needs, but I still want it!
|
Originally Posted by Minnie.the.Moocher
(Post 4448645)
That is awesome. Probably a budget buster for my needs, but I still want it!
There's a very good breakdown in this thread. It wasn't cheap by any means but I feel like it completes my Mini. The Carplay integration with iDrive is just really nicely done. |
Hi, where did you send the unit to get the coding done? Or was it done remotely? Looks like you used an ATM emulator, which did you get? I have an id6 BMW nbt2 evo that I would like mini firmware installed, so just getting as much info necessary if I’m gonna do it myself or not. |
Originally Posted by 6FT6
(Post 4448975)
Hi, where did you send the unit to get the coding done? Or was it done remotely? I have an id6 BMW nbt2 evo that I would like mini firmware installed. |
Originally Posted by markbam
(Post 4448976)
I bought it from an ebay seller in Bulgaria who was able to flash and code it before shipping. It was plug and play. |
Originally Posted by markbam
(Post 4448976)
I bought it from an ebay seller in Bulgaria who was able to flash and code it before shipping. It was plug and play. |
You need to change simply a few parameters under NBT2 for the MINI “theme” ... it isn’t separate software ... i’ll have to pull a few parameters to tell you wha needs to be changed. Be be aware that you will also need to change the amplifier settings, vehicle style and model, telematics ECU type, as well as screen size and type you can use the evo headhunt with or without a new touchscreen :) .... simply code the system for the right size, supply 12v screen power from another source. As apix2 screen is 9v, while a apix1 screen is 12v and only 16bit color vs 24 bit color. simply changing the build date on the vehicle order and then VO_coding the nbt2 evo will be the easiest to make all OEM changes to the unit |
Originally Posted by pillpusher84
(Post 4453294)
You need to change simply a few parameters under NBT2 for the MINI “theme” ... it isn’t separate software ... i’ll have to pull a few parameters to tell you wha needs to be changed. Be be aware that you will also need to change the amplifier settings, vehicle style and model, telematics ECU type, as well as screen size and type you can use the evo headhunt with or without a new touchscreen :) .... simply code the system for the right size, supply 12v screen power from another source. As apix2 screen is 9v, while a apix1 screen is 12v and only 16bit color vs 24 bit color. simply changing the build date on the vehicle order and then VO_coding the nbt2 evo will be the easiest to make all OEM changes to the unit |
To answer the OP's question. Yes you can flash any BMW Evo to run Mini HMI. I only look for evos to buy not Mini Evos.
Just got mine updated today with F55. And the manuals. It was a pleasant surprise. I was using tool32 for something else. Re injected cafd it just magically appeared. I had countryman graphics on my retrofitted id4 to id5 also (another unit). I'm gonna try the same tool32 job on this unit shortly. Will let you know. https://cimg8.ibsrv.net/gimg/www.nor...b76c674942.jpg https://cimg9.ibsrv.net/gimg/www.nor...ffe29ba24b.jpg |
Originally Posted by William Choi
(Post 4514109)
To answer the OP's question. Yes you can flash any BMW Evo to run Mini HMI. I only look for evos to buy not Mini Evos.
Just got mine updated today with F55. And the manuals. It was a pleasant surprise. I was using tool32 for something else. Re injected cafd it just magically appeared. I had countryman graphics on my retrofitted id4 to id5 also (another unit). I'm gonna try the same tool32 job on this unit shortly. Will let you know. https://cimg8.ibsrv.net/gimg/www.nor...b76c674942.jpg https://cimg9.ibsrv.net/gimg/www.nor...ffe29ba24b.jpg May I ask you what's the correct procedure to flash a BMW's evo headunit to have Mini HMI? Thanks in advance :) Cheers |
Hi all,
I'd like to give to the community another feedback about this topic: yesterday my coder was able to successfully flash my BMW's Nbt Evo (coming from a G01 vehicle) and convert it to Mini F54 GUI. He told me he flashed the headunit with my VIN using latest F56 Psdzdata, and then he loaded FSC files without problems at all. Matt |
What software version did he flash to? No need to know the istep.
|
Originally Posted by William Choi
(Post 4514889)
What software version did he flash to? No need to know the istep.
which software version are you asking for? Below some pics of the installation performed today: https://cimg7.ibsrv.net/gimg/www.nor...3bc4a036d.jpeg https://cimg1.ibsrv.net/gimg/www.nor...baa54f529.jpeg https://cimg4.ibsrv.net/gimg/www.nor...817ecff20.jpeg https://cimg9.ibsrv.net/gimg/www.nor...196a27ea4.jpeg https://cimg1.ibsrv.net/gimg/www.nor...befc3d218.jpeg |
Nevermind! Answered my own question while on the bench!
https://cimg6.ibsrv.net/gimg/www.nor...13050d62b.jpeg F57 https://cimg7.ibsrv.net/gimg/www.nor...a7f285438.jpeg F56 https://cimg8.ibsrv.net/gimg/www.nor...bd123aca7.jpeg F60 https://cimg9.ibsrv.net/gimg/www.nor...bcc3e38e4.jpeg F54 https://cimg0.ibsrv.net/gimg/www.nor...1f097e6f9.jpeg F55 |
:thumbsup:
|
Originally Posted by markbam
(Post 4448976)
I bought it from an ebay seller in Bulgaria who was able to flash and code it before shipping. It was plug and play. Marcio.mata@me.com |
Originally Posted by William Choi
(Post 4514961)
Nevermind! Answered my own question while on the bench!
https://cimg6.ibsrv.net/gimg/www.nor...13050d62b.jpeg F57 https://cimg7.ibsrv.net/gimg/www.nor...a7f285438.jpeg F56 https://cimg8.ibsrv.net/gimg/www.nor...bd123aca7.jpeg F60 https://cimg9.ibsrv.net/gimg/www.nor...bcc3e38e4.jpeg F54 https://cimg0.ibsrv.net/gimg/www.nor...1f097e6f9.jpeg F55 thanks a lot |
Originally Posted by William Choi
(Post 4514961)
Nevermind! Answered my own question while on the bench!
https://cimg6.ibsrv.net/gimg/www.nor...13050d62b.jpeg F57 https://cimg7.ibsrv.net/gimg/www.nor...a7f285438.jpeg F56 https://cimg8.ibsrv.net/gimg/www.nor...bd123aca7.jpeg F60 https://cimg9.ibsrv.net/gimg/www.nor...bcc3e38e4.jpeg F54 https://cimg0.ibsrv.net/gimg/www.nor...1f097e6f9.jpeg F55 many thanks! |
Coder in USA
Can someone assist me finding someone who can flash/program/code a head unit for me? (Im willing to pay) I want to retrofit 8.8 touchscreen to a 2017 F57 convertible S, my car is 6.5 visual boost I know is doable... The more I read about how to do this I just realize Im not capable to do it by myself and I don't want to brick this expensive unit... or use a ATM emulator either.
I was able to find a seller on eBay who has the parts including a headunit i need, is HW4.1 not sure if it has GPS but i needs to be configured to my VIN number, activated the CarPlay, put the right graphics for my car... and I don't know what else is need to be done to get the navigation working... Im located in USA. I will appreciate the help.. thanks all
Originally Posted by William Choi
(Post 4514961)
Nevermind! Answered my own question while on the bench!
https://cimg6.ibsrv.net/gimg/www.nor...13050d62b.jpeg F57 https://cimg7.ibsrv.net/gimg/www.nor...a7f285438.jpeg F56 https://cimg8.ibsrv.net/gimg/www.nor...bd123aca7.jpeg F60 https://cimg9.ibsrv.net/gimg/www.nor...bcc3e38e4.jpeg F54 https://cimg0.ibsrv.net/gimg/www.nor...1f097e6f9.jpeg F55 |
All times are GMT -7. The time now is 08:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands