Navigation & Audio Finalized my Project!
#1
The following 8 users liked this post by minicooperjp:
cjv2 (12-18-2021),
Clutch Wotan (09-13-2019),
DDominick (04-29-2020),
McFred (01-20-2022),
mini_marcmarc (07-09-2020),
and 3 others liked this post.
#3
#4
These parts are what I needed as I had the regular radio, if you already visual boost, which is the 6.5" display, the cost will be less and less work will be required.
Part #s and links:
Touchscreen: 65506820386
CID cable: https://www.ebay.com/itm/BMW-F10-F20...-/253205196176
NBT EVO Unit: 65128708270
Controller: 65829866934
Touch Unit: 65829371374
Emulator:https://www.ebay.com/itm/Plug-and-pl...19.m1438.l2649
USB Cable: https://www.ebay.com/itm/BMW-CIC-NBT...72.m2749.l2649
Wi-fi antenna: https://www.ecstuning.com/b-genuine-...n/61119308571/
Or
https://www.ebay.com/itm/BMW-CIC-NBT...72.m2749.l2649
Bluetooth: https://www.ebay.com/itm/BMW-CIC-NBT...72.m2749.l2649
2nd microphone: https://www.ebay.com/itm/BMW-CIC-NBT...EAAOSw~0paRLt1
GPS antenna:
FSC Codes: CarPlay and activation of navigation services ($250)
Create harness for audio control panel
My cost was about $2,000-$2,500
Part #s and links:
Touchscreen: 65506820386
CID cable: https://www.ebay.com/itm/BMW-F10-F20...-/253205196176
NBT EVO Unit: 65128708270
Controller: 65829866934
Touch Unit: 65829371374
Emulator:https://www.ebay.com/itm/Plug-and-pl...19.m1438.l2649
USB Cable: https://www.ebay.com/itm/BMW-CIC-NBT...72.m2749.l2649
Wi-fi antenna: https://www.ecstuning.com/b-genuine-...n/61119308571/
Or
https://www.ebay.com/itm/BMW-CIC-NBT...72.m2749.l2649
Bluetooth: https://www.ebay.com/itm/BMW-CIC-NBT...72.m2749.l2649
2nd microphone: https://www.ebay.com/itm/BMW-CIC-NBT...EAAOSw~0paRLt1
GPS antenna:
FSC Codes: CarPlay and activation of navigation services ($250)
Create harness for audio control panel
My cost was about $2,000-$2,500
The following 6 users liked this post by minicooperjp:
6FT6 (08-27-2018),
Banner28 (04-01-2019),
markbam (10-10-2018),
Nino781 (10-21-2022),
reidmefirst (03-03-2019),
and 1 others liked this post.
#7
Trending Topics
#10
#11
If you want CarPlay then you will have to get the 8.8” screen with trim and the nbt evo headunit
#12
#13
#14
#15
https://rover.ebay.com/rover/0/0/0?m...2F253905696186
Ita different, the other one is if they’re both newer generation. It would be like the one on top. What you do is you use the same cid wire but replace the 2 voltage pins as shown on the pics.
Ita different, the other one is if they’re both newer generation. It would be like the one on top. What you do is you use the same cid wire but replace the 2 voltage pins as shown on the pics.
#17
I am in the midst of this of this retrofit from Visual Boost to Media XL (NBT EVO 2 head-unit). I have already installed the 8.8" screen, touch ecu and touch iDrive controller. I am planning to get my VO coded properly, so I don't need to use an emulator.
Is it okay to install the head-unit prior to coding and updating the VO; or is it better to code the head-unit on a bench prior to installation. I do not want to brick the head-unit.
@minicooperjp Where did you mount your GPS aerial and the WiFi aerial for Car Play.
Is it okay to install the head-unit prior to coding and updating the VO; or is it better to code the head-unit on a bench prior to installation. I do not want to brick the head-unit.
@minicooperjp Where did you mount your GPS aerial and the WiFi aerial for Car Play.
#19
Bench is better .. I had to send it to one guy he generated fsc codes under my vin and unlock it and updated maps to 18,2 or so and I just put it in and change the vo and all is working fine. We where trying to do it by pendrive but there was problem with usb ... also remotely with esys was problem because I do have just lite version not full so he wasn't able to find file for update .
#21
I also need to get a wiring diagram to retrofit the armrest/telephone cradle.
#23
@minicooperjp does your retrofit head unit show animations and images of an F56 or an F60? I got my retrofit done but the images are all F60.
#24
@markbam did you have to do anything special? Istep update? I installed an Nbt EVO id5, hw3.1 from a 2017 f60.
Update
Dont worry, I noticed from one of your previous posts that you got it coded in Bulgaria and was plug and play.
Do you think they can remotely code from Bulgaria?.
Update
Dont worry, I noticed from one of your previous posts that you got it coded in Bulgaria and was plug and play.
Do you think they can remotely code from Bulgaria?.
Last edited by 6FT6; 09-09-2019 at 08:51 PM.