Navigation & Audio Need new phone mount
Thread Starter
|
3rd Gear
Joined: Sep 2007
Posts: 158
Likes: 4
Of course I could always look at alternative cases.
Thread Starter
|
3rd Gear
Joined: Sep 2007
Posts: 158
Likes: 4
I can help with that!
It probably just ended up behind the kick-panel. The section in front of your knees when you drive is on hinges like a cabinet. If you grab at the top of it and pop it out of the clips it will open up for you and the bit should be in there.
-=Kellen
It probably just ended up behind the kick-panel. The section in front of your knees when you drive is on hinges like a cabinet. If you grab at the top of it and pop it out of the clips it will open up for you and the bit should be in there.
-=Kellen
Thread Starter
|
3rd Gear
Joined: Sep 2007
Posts: 158
Likes: 4
http://a.co/h4058JF
Installation of the CravenSpeed mount will need to wait. Someone damaged my bumper a week after I got my car. It's at the shop. The good news is we may have figured out who did it.
Left side, its against the door, when the door is closed
Part #4
http://www.realoem.com/bmw/enUS/show...diagId=51_9609
Thread Starter
|
3rd Gear
Joined: Sep 2007
Posts: 158
Likes: 4
You need to pull the side panel first!
Left side, its against the door, when the door is closed
Part #4
http://www.realoem.com/bmw/enUS/show...diagId=51_9609
Left side, its against the door, when the door is closed
Part #4
http://www.realoem.com/bmw/enUS/show...diagId=51_9609
I'm ordering a torx T15 screwdriver. One that doesn't have a removable tip.
If not, it will live inside the Mini for the rest of its existence.
__________________
Thread Starter
|
3rd Gear
Joined: Sep 2007
Posts: 158
Likes: 4
I ordered a new case. We'll see if that helps. It will arrive tomorrow.
http://a.co/h4058JF
Installation of the CravenSpeed mount will need to wait. Someone damaged my bumper a week after I got my car. It's at the shop. The good news is we may have figured out who did it.
http://a.co/h4058JF
Installation of the CravenSpeed mount will need to wait. Someone damaged my bumper a week after I got my car. It's at the shop. The good news is we may have figured out who did it.
Thread Starter
|
3rd Gear
Joined: Sep 2007
Posts: 158
Likes: 4
I spoke too soon about the magnet holding with the new case. It slowly rotates around until the phone is upside down. Then it's steady. That's a workaround for now. The CravenSpeed clamp broke and they're sending me a new one. Their customer service is as good as everyone says.
1st Gear
Joined: Jan 2013
Posts: 26
Likes: 0
Air vent cell phone mount
I’ve been struggling to find the perfect way to mount my iPhone in my 2013 Countryman. I’ve looked at all the suggestions here (craven, pro-clip etc.) I’ve been avoiding an air vent mount because I’m often in hot weather and need all the A/C I can get 😊. However, I just ordered and received this little thing, the OHLPRO magnetic air vent mount for $13.67! I am very pleasantly surprised. (I also ordered the Magic Mount air vent holder at the same time, which also works well.) But what I like about the OHLPRO is that it sits off-center on the vent, so it can be positioned so that it doesn’t block the whole vent. It also comes with a larger magnet that can hold my iPhone 8 Plus. (I just put the magnet inside my case.) I know everyone has different preferences on phone placement, but for the price, this really can’t be beat. (Side note: I ordered rose gold plates from Magic Mount to use inside my clear case so it looks much better than a black rectangle on the back of my ohine
😊.) Just thought I’d share since I’ve found helpful advice on this forum in the past!
😊.) Just thought I’d share since I’ve found helpful advice on this forum in the past!
Thread
Thread Starter
Forum
Replies
Last Post
nlerias
F55/F56 :: Hatch Talk (2014+)
3
Aug 17, 2014 07:41 AM
Flyer53
1st Gen Countryman (R60) Talk (2010-2015)
22
Apr 19, 2011 11:22 AM
BellePepper
R50/R53 :: Hatch Talk (2002-2006)
3
Jan 12, 2003 08:21 PM
