MacroPolo I sent you a PM
|
Originally Posted by soundman2
(Post 4397791)
wow! thanks a lot man!
i'll keep looking after the correct hardware calalog serials: 65129394552 headunit - 1200$ 65829381679 controller - 260$ 65509367674 8.8" screen - 250$ only coding expert needed 65129394552 headunit - 1200$ 65829866932 touch controller (the one above is the non-touch) 400$ 65509387452 8.8" display unit 3000$ TOTAL COST 4600$ any advice having these parts in cheaper price would be great... |
Originally Posted by MarcoPolo
(Post 4397929)
i have a lot of these parts for sale. reach out if interested. was a project i was working on but realized that unfortunately, BMW has 2 part numbers for the dash, 1 for the regular radio and 1 for both 6.5 and 8.8" screens. since i have the basic radio, it would require me to cut up my dash to fit the 8.8"....so the project, after buying all the parts, is over.
if anyone has any interest, PM me. |
Originally Posted by soundman2
(Post 4406258)
attaching correct serials for public use
65129394552 headunit - 1200$ 65829866932 touch controller (the one above is the non-touch) 400$ 65509387452 8.8" display unit 3000$ TOTAL COST 4600$ any advice having these parts in cheaper price would be great... Pulled from a 2016 model, so no CarPlay, but it has the 8" screen and touchpad along with the head unit. |
Originally Posted by soundman2
(Post 4406258)
attaching correct serials for public use
65129394552 headunit - 1200$ 65829866932 touch controller (the one above is the non-touch) 400$ 65509387452 8.8" display unit 3000$ TOTAL COST 4600$ any advice having these parts in cheaper price would be great... |
touch screen is a must as that's the purpose of carplay.
in addtion the upgraded system hardware is a requirement for the connection |
i recently spoke with one of the bimmer coders .
he claims that he can code a used headunit (with navigation ofc) to enable in my vehicle. still looking for ECE headunit. will update |
Originally Posted by soundman2
(Post 4412607)
touch screen is a must as that's the purpose of carplay.
in addtion the upgraded system hardware is a requirement for the connection |
Like @6FT6 said the touchscreen isn’t necessary for CarPlay, as you can use the controller mostly just a preference. The important part is having the actual NBT EVO id5 head unit that allows for CarPlay to be used. I’ll leave here a link to the marketplace in which I’m selling my unit and non touch display so you can see CarPlay working. https://www.northamericanmotoring.co...t-evo-id5.html |
understood.
thanks for the info guys :) that why forums exist. btw i see your HU was superseded by cat number 65128802925. do you know of any changes ? i am asking in order to choose better between the ECE ones in ebay |
The only change I can possibly think of is the ability to use a touch screen. Everything else seems the same. |
do you know how can one know if NBT has touch functionality ?
for example : https://cimg4.ibsrv.net/gimg/www.nor...6c63ba0f1b.jpg |
It's a little hard for me to read, but for sure HW needs to be 3.1 and build date should be late 2017. Currently shipped out my unit to get coded but my part number is 65128792249 and that has touch. Of course also important to make sure its a Mini one and not a BMW just because BMW doesn't have the blue gps antenna connector and instead uses an ATM module for that.
|
I have swapped my 6.5” screen for an 8.8” screen and coded without any issues. The thing is the led central instrument is not illuminating. I am not sure if it needs coding; wiring reconfigured in the plug or it is faulty. |
Put the old one back in and check, there is no coding for the led ring. Maybe a faulty cable or ring. |
My old ring is definitely working, just wanted to rule out coding and possibly the wiring configuration different between the 6.5” ring and the 8.8” version. |
Originally Posted by cage911
(Post 4432538)
My old ring is definitely working, just wanted to rule out coding and possibly the wiring configuration different between the 6.5” ring and the 8.8” version. |
Originally Posted by 6FT6
(Post 4432611)
Cool, they are both the same. I did the exact same swap.
|
I have a 2017 S Convertible with the 8.8" visual boost. I would love to be able to swap out my unit for the touchscreen with ApplePlay. Has anyone successfully done this? The dealership says it can be done, but then again, they aren't able to tell me much about the unit that is in my car to begin with. It seems there is little to no support for MINI Connected. Kinda sucks!
|
Upgrade 6.5" monitor to 8.8" F60 MINI Countryman
Hi, My Mini Cooper CoiuntryMan F60 Radio VisualBoost came with a 6.5" faceplate and i wish to upgrade it to the 8.8" faceplate.Will this be a simple plug & play connection?.Will i face any issues since the connectors on the back of both units look the exact same.Has anyone done this?.Please advice & share your experiences.
|
Originally Posted by varmaTrini1986
(Post 4473637)
Hi, My Mini Cooper CoiuntryMan F60 Radio VisualBoost came with a 6.5" faceplate and i wish to upgrade it to the 8.8" faceplate.Will this be a simple plug & play connection?.Will i face any issues since the connectors on the back of both units look the exact same.Has anyone done this?.Please advice & share your experiences.
Code Changes HU_NBT > 3000 HMI > DISPLAY_SIZE_RESOLUTION = 8.8_1280x480 HU_NBT > 3001 EXBOX > DISPLAY_VARIANTE = breites_display |
Upgrade 6.5" monitor to 8.8" F60 MINI Countryman
I want to upgrade the screen from 6.5" to the 8.8".I checked the connectors at the behind of both and they look exactly similar.I want to keep the head unit/radio and just swap the display from 6.5" to 8.8".Should this be possible?.Are the screens VIN locked?.Has anyone done this?.Is this a simple plug & play?.Should i expect any issues?.Please advice.Thanks.
|
Originally Posted by varma1986
(Post 4474642)
I want to upgrade the screen from 6.5" to the 8.8".I checked the connectors at the behind of both and they look exactly similar.I want to keep the head unit/radio and just swap the display from 6.5" to 8.8".Should this be possible?.Are the screens VIN locked?.Has anyone done this?.Is this a simple plug & play?.Should i expect any issues?.Please advice.Thanks.
On another note, are you from 🇹🇹 |
How to do the coding?.
|
Yes.I am from Trinidad & Tobago.I have no information on the coding.Do they sell the code on a USB drive or something?.Can it be downloaded on a USB stick from online to update my cars computer?.Please enlighten.Thanks.
|
All times are GMT -7. The time now is 12:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands