North American Motoring

North American Motoring (https://www.northamericanmotoring.com/forums/)
-   MINI Parts for Sale (https://www.northamericanmotoring.com/forums/mini-parts-for-sale-387/)
-   -   FS:: Side Mirrors Power Folding Heated Pair with Original Mini Union Jack Mirror Caps (https://www.northamericanmotoring.com/forums/mini-parts-for-sale/340477-side-mirrors-power-folding-heated-pair-with-original-mini-union-jack-mirror-caps.html)

Thelockwoods.steve 07-08-2019 04:43 AM

Side Mirrors Power Folding Heated Pair with Original Mini Union Jack Mirror Caps
 
Replacement Power Folding Heated Mirrors fitted with Original Mini Union Jack Caps

Selling as a PAIR - LH (Driver Side) & RH (Passenger Side) for LHD vehicles.

Fitted once. Basically unused. Bought in error for RHD R52 and then realised my mistake.

Note...the caps are glued in position

Postage with USPS IS $21 anywhere in the continental US, or free local pickup in Virginia Beach







https://cimg7.ibsrv.net/gimg/www.nor...8fff1551a.jpeg
https://cimg8.ibsrv.net/gimg/www.nor...939d34659.jpeg

JAB 67 07-08-2019 11:34 AM

Is the necessary wiring harness pre-installed in all Gen 1? And, where do you place the switch?

Thelockwoods.steve 07-08-2019 11:47 AM

https://cimg8.ibsrv.net/gimg/www.nor...f55189b52.jpeg

Originally Posted by JAB 67 (Post 4481260)
Is the necessary wiring harness pre-installed in all Gen 1? And, where do you place the switch?


The switch sits to the right of the mirror adjustment switch under the e-brake handle. I am not sure is the wiring is pre-installed...we bought the car with the option

Mr_Mooses 07-10-2019 12:00 PM

i never knew 1st gens had power folding.. that's cool

05MCSR52 07-11-2019 07:20 AM

Just when I thought having power folding mirrors wasn't possible for my 2005 R52... :eek:

Now to find out if I have the appropriate wiring in place in the doors...

... and find the switch too...

EDIT

found the switch w/ heated seat option:
https://www.allmagautoparts.com/prod...hoCwNMQAvD_BwE

05MCSR52 07-14-2019 04:41 PM


Originally Posted by JAB 67 (Post 4481260)
Is the necessary wiring harness pre-installed in all Gen 1? And, where do you place the switch?

I pulled my driver's door mirror off and it was hooked up to a wire loom, so I will "assume" that the cars are wired by default...

or...

Are the mirrors actually power folding and the switch is the "option"?? Hmmm...

deepgrey 07-15-2019 12:08 PM

All cars have a loom running to the mirrors for the power adjustment feature. Power fold was a separate option, and there is a different part number for the power fold mirrors than manual fold ones.

I don’t know if any cars were pre-wired for power fold, but I know of at least one person on the forums who retrofitted the power folding mirrors and had to run more wires. It looked like a real pain to do.

05MCSR52 07-15-2019 01:09 PM

Duh, the mirrors are "powered"... sheesh...

https://www.dictionary.com/e/wp-cont...5/facepalm.jpg


All times are GMT -7. The time now is 11:08 PM.


© 2024 MH Sub I, LLC dba Internet Brands