FS:: BC Racing coilovers for R56 Cooper S
#1
SOLD. BC Racing coilovers for R56 Cooper S
Category: Suspension
Price: $1100
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): R56
Location (Region): Texas
Item Condition: Used
Last edited by sludge1300; 08-21-2012 at 08:18 AM. Reason: sold
#3
I forgot to measure ride height while stock, but the BC's at their current setting had my ride height at 23.9" from ground to fender all the way around. This is the setup in my sig pic.
#7
do you have a front view pic with this set up?
so you were almost maxed out in the rear?
so you were almost maxed out in the rear?
Trending Topics
#8
This is the best I can do, tape measure has 1.5" of tape sticking out of the case.
Yes, it was almost all the way down in the rear. I'm not sure, but I think the relationship between actual drop and coil adjustment in the rear is not 1:1. I would imagine you could bring the back down another cm or so.
Yes, it was almost all the way down in the rear. I'm not sure, but I think the relationship between actual drop and coil adjustment in the rear is not 1:1. I would imagine you could bring the back down another cm or so.
#9
Oops, missed your other question. I went with Swift because many agree that they are of much higher quality. Improving both performance and ride. I also wanted to run higher spring rates than the included 7k front, 5k rear.
You can find lots of discussion on the subject in this thread:
https://www.northamericanmotoring.co...-feedback.html
You can find lots of discussion on the subject in this thread:
https://www.northamericanmotoring.co...-feedback.html
#11
no I'm sorry lol, I just wanted to get a good picture of the BC drop because I just ordered myself a pair. but Im not too sure i am happy with the drop. I wanted to slam my car pretty low. -_-
#17
30 way combined rebound/compression ****, front camber, ride height and spring preload are all adjustable.
All the information you could want is in this thread:
https://www.northamericanmotoring.com...-feedback.html
All the information you could want is in this thread:
https://www.northamericanmotoring.com...-feedback.html
#19
Crap. Sorry for the two week delay. Setup is still for sale.
https://www.northamericanmotoring.co...edback-15.html
https://www.northamericanmotoring.co...edback-15.html
Thread
Thread Starter
Forum
Replies
Last Post
ECSTuning
Vendor Announcements
0
08-12-2015 01:24 PM
ECSTuning
Interior/Exterior Products
2
08-07-2015 09:51 AM