North American Motoring

North American Motoring (https://www.northamericanmotoring.com/forums/)
-   JCW Garage (https://www.northamericanmotoring.com/forums/jcw-garage-230/)
-   -   JCW stock tune (https://www.northamericanmotoring.com/forums/jcw-garage/303843-jcw-stock-tune.html)

gsfent 06-13-2016 01:49 PM

JCW stock tune
 
I took my new to me R52 fJCW for a couple of dyno pulls. On a dynojet, hot Florida day, medium humidity, it put down a very respectable 183. The hp and TQ curves were very flat.


But about 4000 rpm, the car goes pig rich (down to 10.5 AFR at redline). After tuning back to the high 12's, is it reasonable to expect to see about 200 hp at the wheels? Will I need a retune if I get an underdrive (17%) pulley from one of the board vendors?


Thx.


Regards
Jerry

Swimbaxter 06-13-2016 02:26 PM

Your title confused me a bit. I think you have a r52 jcw not a fjcw(FJ's are the current model). Not sure you will see 200 whp with just a 17% pulley and tune but you should get close. What Injectors are you running? 380cc jcw's?

gsfent 06-13-2016 03:37 PM


Originally Posted by Swimbaxter (Post 4217097)
Your title confused me a bit. I think you have a r52 jcw not a fjcw(FJ's are the current model). Not sure you will see 200 whp with just a 17% pulley and tune but you should get close. What Injectors are you running? 380cc jcw's?

Thanks.


I thought fJCW was shorthand for Factory JCW in the 1st gen cars. Mine is a factory JCW Sidewalk.


Yes, 380cc's. Trying to get it running right before I make it run better.


Regards,
Jerry

Mini Mania 06-13-2016 03:55 PM

R52 jcw
 

Originally Posted by gsfent (Post 4217087)
I took my new to me R52 fJCW for a couple of dyno pulls. On a dynojet, hot Florida day, medium humidity, it put down a very respectable 183. The hp and TQ curves were very flat.


But about 4000 rpm, the car goes pig rich (down to 10.5 AFR at redline). After tuning back to the high 12's, is it reasonable to expect to see about 200 hp at the wheels? Will I need a retune if I get an underdrive (17%) pulley from one of the board vendors?


Thx.


Regards
Jerry


Hi Jerry!

Here are a couple of background articles that may help in the tuning process!

http://new.minimania.com/Search_Results/tune/Articles

Drive Hard. Drive Safe. Keep Grinning.

gsfent 06-13-2016 07:11 PM


Originally Posted by Mini Mania (Post 4217125)
Hi Jerry!

Here are a couple of background articles that may help in the tuning process!

http://new.minimania.com/Search_Results/tune/Articles

Drive Hard. Drive Safe. Keep Grinning.



Thanks!!


Regards,
Jerry


All times are GMT -7. The time now is 10:39 AM.


© 2024 MH Sub I, LLC dba Internet Brands