Interior/Exterior GP2 Steering Wheel?
#1
GP2 Steering Wheel?
What's up guys
Not sure if am the first one to ask this question, but I can't find anything.
As you know I have a 2008 R56 auto. And I wanted to get a new steering wheel with more grip and because my current one is too old as well.
So I was looking at the GP2 Steering Wheel and on the description it says "Not designed for use with automatics unless modifications are performed. Professional installation recommended due to airbag removal."
Now about the paddle shifters "The ability to use the paddle shifters with this steering wheel will be lost." is is something to live without? Lol, I mean I can't down shift with my left paddle shifter it shift up a gear for some reason....
Not sure if am the first one to ask this question, but I can't find anything.
As you know I have a 2008 R56 auto. And I wanted to get a new steering wheel with more grip and because my current one is too old as well.
So I was looking at the GP2 Steering Wheel and on the description it says "Not designed for use with automatics unless modifications are performed. Professional installation recommended due to airbag removal."
Now about the paddle shifters "The ability to use the paddle shifters with this steering wheel will be lost." is is something to live without? Lol, I mean I can't down shift with my left paddle shifter it shift up a gear for some reason....
#2
I installed a JCW suede wheel on my car, and installed the paddle shifters. The steel frame of the wheel is the same, but the foam is not 'notched' for the paddle shifters. You can use your old wheel for a template, and trim out the foam with some sharp x-acto blades. There are a few 'how-to' articles around this forum.
The Bentley manual describes how to take off the airbag and wheel, it isn't that bad. just remember to disconnect the battery so you don't get any suprises.
I highly recommend the alacantara wheel, it feels great in your hands compared to the regular MCS wheel. Check out some of the vendors here, you should be able to get a wheel for about $400.
Have fun,
Mike
The Bentley manual describes how to take off the airbag and wheel, it isn't that bad. just remember to disconnect the battery so you don't get any suprises.
I highly recommend the alacantara wheel, it feels great in your hands compared to the regular MCS wheel. Check out some of the vendors here, you should be able to get a wheel for about $400.
Have fun,
Mike
#3
I installed a JCW suede wheel on my car, and installed the paddle shifters. The steel frame of the wheel is the same, but the foam is not 'notched' for the paddle shifters. You can use your old wheel for a template, and trim out the foam with some sharp x-acto blades. There are a few 'how-to' articles around this forum.
The Bentley manual describes how to take off the airbag and wheel, it isn't that bad. just remember to disconnect the battery so you don't get any suprises.
I highly recommend the alacantara wheel, it feels great in your hands compared to the regular MCS wheel. Check out some of the vendors here, you should be able to get a wheel for about $400.
Have fun,
Mike
The Bentley manual describes how to take off the airbag and wheel, it isn't that bad. just remember to disconnect the battery so you don't get any suprises.
I highly recommend the alacantara wheel, it feels great in your hands compared to the regular MCS wheel. Check out some of the vendors here, you should be able to get a wheel for about $400.
Have fun,
Mike
The JCW Alcantara Steering Wheel looks nice do they have more than one design? Like with the red stitching and act?
#4
You can mod the GP2 steering wheel for paddles , it shares the same set up as the JCW alcantara Thicker steering wheel .
JCW GP2 Leather Steering Wheel - Red Stitching
http://www.ecstuning.com/Search/SiteSearch/32306858010/
And the JCW thicker alcantara / leather 32300416251
http://www.ecstuning.com/Search/SiteSearch/32300416251/
Linked for Mod.
https://www.northamericanmotoring.co...-shifters.html
Install:
https://www.northamericanmotoring.co...tallation.html
Thanks
JCW GP2 Leather Steering Wheel - Red Stitching
http://www.ecstuning.com/Search/SiteSearch/32306858010/
And the JCW thicker alcantara / leather 32300416251
http://www.ecstuning.com/Search/SiteSearch/32300416251/
Linked for Mod.
https://www.northamericanmotoring.co...-shifters.html
Install:
https://www.northamericanmotoring.co...tallation.html
Thanks
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Last edited by ECSTuning; 02-10-2015 at 07:07 AM.
#5
You can mod the GP2 steering wheel for paddles , it shares the safe set up as the JCW alcantara Thicker steering wheel .
JCW GP2 Leather Steering Wheel - Red Stitching
http://www.ecstuning.com/Search/SiteSearch/32306858010/
And the JCW thicker alcantara / leather 32300416251
http://www.ecstuning.com/Search/SiteSearch/32300416251/
Linked for Mod.
https://www.northamericanmotoring.co...-shifters.html
Install:
https://www.northamericanmotoring.co...tallation.html
Thanks
JCW GP2 Leather Steering Wheel - Red Stitching
http://www.ecstuning.com/Search/SiteSearch/32306858010/
And the JCW thicker alcantara / leather 32300416251
http://www.ecstuning.com/Search/SiteSearch/32300416251/
Linked for Mod.
https://www.northamericanmotoring.co...-shifters.html
Install:
https://www.northamericanmotoring.co...tallation.html
Thanks
The following users liked this post:
ECSTuning (08-28-2017)
#6
The back of the suede wheel looks like the paddle shifters would bolt right up, maybe minor trimming. Maybe they changed this because they started offering JCW automatics? My wheel looked like the GP2 on the back, which is why I needed to cut out foam.
Again, ECS to the rescue....
Have fun,
Mike
Again, ECS to the rescue....
Have fun,
Mike
#7
Trending Topics
#8
The GP wheel leather/Alcantara wheel is one of the best mods I ever added! (Plus, its a dead perfect match for the Recaro seats in my Clubman!)
(Ok, well the big RSB is a really great upgrade as well..)
#9
#11
Phil at www.detailersdomain.com has special alcantara foam cleaner for this. I use it on my JCW steering wheel. If memory serves, it's a SONAX product. Works great !
#13
You might consider going the route I am, which is buying a cheap used steering wheel off eBay and then ordering a custom leather cover in any color and thread you want from redlinegoods. Additional padding optional. I'm planning on getting black Nappa leather on the top and bottom with perforated black Nappa on the sides and cream (off white) thread. I've already got black Nappa with cream "M style" stitching on my boots and armrest, so I figured the steering wheel would be best if it had matching leather and thread. The used steering wheel only cost $75 shipped so the whole deal should end up being less than $250.
#16
What's up guys
Not sure if am the first one to ask this question, but I can't find anything.
As you know I have a 2008 R56 auto. And I wanted to get a new steering wheel with more grip and because my current one is too old as well.
So I was looking at the GP2 Steering Wheel and on the description it says "Not designed for use with automatics unless modifications are performed. Professional installation recommended due to airbag removal."
Now about the paddle shifters "The ability to use the paddle shifters with this steering wheel will be lost." is is something to live without? Lol, I mean I can't down shift with my left paddle shifter it shift up a gear for some reason....
Not sure if am the first one to ask this question, but I can't find anything.
As you know I have a 2008 R56 auto. And I wanted to get a new steering wheel with more grip and because my current one is too old as well.
So I was looking at the GP2 Steering Wheel and on the description it says "Not designed for use with automatics unless modifications are performed. Professional installation recommended due to airbag removal."
Now about the paddle shifters "The ability to use the paddle shifters with this steering wheel will be lost." is is something to live without? Lol, I mean I can't down shift with my left paddle shifter it shift up a gear for some reason....
As for the left paddle not downshifting, you need to read the book. In there you will find that pulling either paddle engages an upshift while pushing either paddle engages a downshift. It's a little like the old Porsche tiptronics where you pushed a button to downshift and pulled the button to upshift. So remember, push - downshift; pull - upshift.
#17
I just spent two weeks driving an automatic that didn't have the paddle shifters on the wheel and I can say the paddles are definitely needed to enjoy the driving experience. It's something I would not eliminate just to get a new steering wheel. FYI I have the paddle shifters on my 08 auto and love it.
As for the left paddle not downshifting, you need to read the book. In there you will find that pulling either paddle engages an upshift while pushing either paddle engages a downshift. It's a little like the old Porsche tiptronics where you pushed a button to downshift and pulled the button to upshift. So remember, push - downshift; pull - upshift.
As for the left paddle not downshifting, you need to read the book. In there you will find that pulling either paddle engages an upshift while pushing either paddle engages a downshift. It's a little like the old Porsche tiptronics where you pushed a button to downshift and pulled the button to upshift. So remember, push - downshift; pull - upshift.
Yes i love the paddle shifter yesterday I took the mini for a ride , it was down to 55 down in Miami and that's a miracle lol ; and I was using them yesterday night and I wouldn't take them out . I'll mod the new steering wheel so I can keep them.
And is there a manual that you can point me to do I can look at the downshifting problem
Thanks
#18
This is from the owner's manual on pages 47-48:
Shifting on the steering wheel*
With the selector lever in position D, automatic
drive, you can shift gears using the shift paddles
on the steering wheel. The transmission automatically
switches to manual mode.
If you do not shift gears with the shift paddles or
accelerate for a certain amount of time, the
transmission automatically returns to D, automatic
drive.
> Pull one of the shift paddles.
Transmission shifts up.
> Push one of the shift paddles.
Transmission shifts down.
M1 to M6 is displayed in the gear indicator.
Shifting on the steering wheel*
With the selector lever in position D, automatic
drive, you can shift gears using the shift paddles
on the steering wheel. The transmission automatically
switches to manual mode.
If you do not shift gears with the shift paddles or
accelerate for a certain amount of time, the
transmission automatically returns to D, automatic
drive.
> Pull one of the shift paddles.
Transmission shifts up.
> Push one of the shift paddles.
Transmission shifts down.
M1 to M6 is displayed in the gear indicator.
#19
This is from the owner's manual on pages 47-48:
Shifting on the steering wheel*
With the selector lever in position D, automatic
drive, you can shift gears using the shift paddles
on the steering wheel. The transmission automatically
switches to manual mode.
If you do not shift gears with the shift paddles or
accelerate for a certain amount of time, the
transmission automatically returns to D, automatic
drive.
> Pull one of the shift paddles.
Transmission shifts up.
> Push one of the shift paddles.
Transmission shifts down.
M1 to M6 is displayed in the gear indicator.
Shifting on the steering wheel*
With the selector lever in position D, automatic
drive, you can shift gears using the shift paddles
on the steering wheel. The transmission automatically
switches to manual mode.
If you do not shift gears with the shift paddles or
accelerate for a certain amount of time, the
transmission automatically returns to D, automatic
drive.
> Pull one of the shift paddles.
Transmission shifts up.
> Push one of the shift paddles.
Transmission shifts down.
M1 to M6 is displayed in the gear indicator.
#20
would you mind sharing some pics? I'm actually planning on going with cream thread as well, since I've already got black nappa boots and arm rests from them with cream stitching
#22
looks good. did you order the stitching in that configuration? The majority of pics I've seen have shown "BMW M stitching", which is what I want, with some write-ups saying you can stitch it any way you want when installing it. However, the way yours is stitched would mean I'd have to do all of the line stitching myself, which would be a pain... Other pics I've seen have shown that the cover is pre-stitched on either edge, which would allow you to simply run a thread inside the existing stitches to complete the M pattern.
#23
i think am just going to do this
http://www.ecstuning.com/ES2590704/
i couldn't find the horn one but i just want it to be black, all the other steering wheels look the same to me.
http://www.ecstuning.com/ES2590704/
i couldn't find the horn one but i just want it to be black, all the other steering wheels look the same to me.
#24
looks good. did you order the stitching in that configuration? The majority of pics I've seen have shown "BMW M stitching", which is what I want, with some write-ups saying you can stitch it any way you want when installing it. However, the way yours is stitched would mean I'd have to do all of the line stitching myself, which would be a pain... Other pics I've seen have shown that the cover is pre-stitched on either edge, which would allow you to simply run a thread inside the existing stitches to complete the M pattern.
#25
You can mod the GP2 steering wheel for paddles , it shares the same set up as the JCW alcantara Thicker steering wheel .
JCW GP2 Leather Steering Wheel - Red Stitching
http://www.ecstuning.com/Search/SiteSearch/32306858010/
And the JCW thicker alcantara / leather 32300416251
http://www.ecstuning.com/Search/SiteSearch/32300416251/
Linked for Mod.
https://www.northamericanmotoring.co...-shifters.html
Install:
https://www.northamericanmotoring.co...tallation.html
Thanks
JCW GP2 Leather Steering Wheel - Red Stitching
http://www.ecstuning.com/Search/SiteSearch/32306858010/
And the JCW thicker alcantara / leather 32300416251
http://www.ecstuning.com/Search/SiteSearch/32300416251/
Linked for Mod.
https://www.northamericanmotoring.co...-shifters.html
Install:
https://www.northamericanmotoring.co...tallation.html
Thanks