North American Motoring

North American Motoring (https://www.northamericanmotoring.com/forums/)
-   Interior/Exterior (https://www.northamericanmotoring.com/forums/interior-exterior-33/)
-   -   Interior/Exterior Bonnet Stripe variations (https://www.northamericanmotoring.com/forums/interior-exterior/27798-bonnet-stripe-variations.html)

kyle00 07-03-2004 09:50 PM

Bonnet Stripe variations
 
Anyone have any different variations of bonnet stripes, im looking to do the viper stripes and also go to the back of the car, but it is highly under debate at the moment. Anyone have any good desings, and also know whaere to get it done or who would do work like this? http://www.mini2.com/gallery/personal/picture34999.html

gt6 07-04-2004 11:40 AM

Check out Cooperflags.com if you haven't already. They can also do custom designs, pretty much anything you could think of.

I have the Shelby stripes on my MCS. Bonnet only for now but am probably going to add the roof and boot as well.


http://home.att.net/%7Eklrhmr/Grill_004.jpg

RLmini 07-04-2004 12:05 PM

What do you guys think would good on an all black MCS with a chrome grill and Cordoba interior? Any pictures?

TWISTER 07-04-2004 01:36 PM

Here is my baby!
 
http://www.gomotoring.com/gallery.html

kyle00 07-04-2004 02:16 PM

That yellow cooper is so sick, that is exactly what I am looking for, what was the cost on that? And where was it done?

OctaneGuy 07-04-2004 02:34 PM

I went for the Uni stripe with pin stripe look. I had seen variations of it before, but never liked the proportions, so I made my own, and got it done and installed at a local sign shop. Turned out to be their first MINI, and biggest nightmare--trying to get the stripe to lie flat over the center bulge, so they worked on it for 3 days ( brought it back each time), and they tried about 5 times before getting it. That's called determination! They did a fantastic job!


http://www.littlemini.us/gallerypix/...r/DSCN9020.jpg

gt6 07-04-2004 04:54 PM


Originally Posted by kyle00
That yellow cooper is so sick, that is exactly what I am looking for, what was the cost on that? And where was it done?

The stripes were $69 and come pre-cut, no trimming to do around the scoop. It was done in my garage by a college kid who used to work for a sign shop. It took him about 30 minutes to do the job. Looks great up close as well as far away, very nice install job.

http://www.cooperflags.com

DSA 07-05-2004 01:42 PM

I had these made from 3M Auto tape they look stock however the actually wrap around the underside of the hood to give it a cleaner appearence.

Note they are black with a metalic pinstripe. Cost was $ 40.00 and 20 min of work.:grin:

The paintball gun is a Carter Machiene Stock Class pump in Electric Blue and Chrome Cost $700.00 Had to have it. Its not everyday you see an "Electric Blue Paintball Gun" that matches your Mini:eek2:


http://www.mcarterbrown.com/images/m...arter_Comp.JPG

10851CS 07-05-2004 02:40 PM


Originally Posted by gt6
The stripes were $69 and come pre-cut, no trimming to do around the scoop. It was done in my garage by a college kid who used to work for a sign shop. It took him about 30 minutes to do the job. Looks great up close as well as far away, very nice install job.

http://www.cooperflags.com

that's exactally what I want done. I have the stripes from Cooper Flags, just need to get them installed. think you college kid would run out to San Diego and put them on for me :grin: :grin: (lots of girls at the beach and guys if the college kid is a girl)

Earl

kyle00 07-05-2004 06:04 PM

The place you got them installed did they remove the old bonnet stripes? Or did you not have any before hand. Mine are still on there at the moment do you guys think the shop could take em off?


All times are GMT -7. The time now is 10:40 AM.


© 2024 MH Sub I, LLC dba Internet Brands