Interior/Exterior Colored LED Dome Lights
#251
kyriian, you might want to try taping some foil to the housing behind the light bulb. i did that to the footwells and the difference in the light output is pretty great like someone already mentioned in this thread. it looks GREAT in red and i LOVE it
i used the 9 led festoon bulb for the dome, which was much brighter then the previous one i ordered. used the foil, and was a bit brighter. ill try to post pictures up this weekend!
i used the 9 led festoon bulb for the dome, which was much brighter then the previous one i ordered. used the foil, and was a bit brighter. ill try to post pictures up this weekend!
#253
I went to the site, where are the 10 blubs you listed? I counted on my 06 MCS
2 next the dome, 2 in the front by the mirror, 2 in the footwells, and 2 in the puddle lights on the doors. What am i missing?
EDIT: Nevermind, i noticed you said there was one for the glovebox and the boot light, so if i dont need some of these cause i already have them can i get a partial kit?
2 next the dome, 2 in the front by the mirror, 2 in the footwells, and 2 in the puddle lights on the doors. What am i missing?
EDIT: Nevermind, i noticed you said there was one for the glovebox and the boot light, so if i dont need some of these cause i already have them can i get a partial kit?
Last edited by IrishCooper; 05-15-2007 at 09:37 AM.
#254
--Dan
Mach V
FastMINI.net
#256
Here's a picture of one of the multi-directional ones. (It's not in a MINI.)
--Dan
Mach V
FastMINI.net
--Dan
Mach V
FastMINI.net
#259
#260
It's pretty easy, but a little tedious. The map light bulbs, in particular, are a real PITA to get out. I ended up completely disassembling my overhead switch/lamp cluster, partly because I couldn't get the bulbs out, and partly because I just wanted to see what was in there.
Next time I'll just use a little pick and get the bulbs out that way...
A small flat screwdriver (or your fingernails) will pop the cover off all the bulb housings in the doors, footwells, glove box, and the boot.
I also wrote up a little FAQ about LEDs, which might help.
--Dan
Mach V
FastMINI.net
#261
#262
--Dan
Mach V
FastMINI.net
#266
We put together LED lamp kits for both generations of MINI. I put Super White ones in our shop car:
You can find the kits HERE.
--Dan
Mach V
FastMINI.net
You can find the kits HERE.
--Dan
Mach V
FastMINI.net
#267
--Dan
Mach V
FastMINI.net
#268
Another LED exterior light: See the little bumper marker lamps below. (Stock bulb on passenger side, LED bulb on driver side.) The LED matches the HID color pretty nicely. But, as I mentioned above, the resistance is different than the stock bulb so I'm working on a resistor for it.
--Dan
Mach V
FastMINI.net
Last edited by Mach V Dan; 05-23-2007 at 10:46 AM.
#270
AWESOME NEW PRODUCT!
Oznium just put out a 4 chip, 16 or 25 LED dome light wafer! These things look incredible! Every LED unit comes with an adapter set which allows you to use them with 194 plugs, festoon-type sockets - basically any dome light area. These could easily be used as 194 replacements as well with a little imagination. Given the LEDs he chose to use, these babies must be VERY bright, and they're available in many different colors. Makes me wish that I had a real dome light...
Oznium just put out a 4 chip, 16 or 25 LED dome light wafer! These things look incredible! Every LED unit comes with an adapter set which allows you to use them with 194 plugs, festoon-type sockets - basically any dome light area. These could easily be used as 194 replacements as well with a little imagination. Given the LEDs he chose to use, these babies must be VERY bright, and they're available in many different colors. Makes me wish that I had a real dome light...
#271
--Dan
Mach V
FastMINI.net
#272
Those are cool, but I don't think there's any way they'll fit in any of the MINI dome or map light fixtures.
--Dan
Mach V
FastMINI.net
--Dan
Mach V
FastMINI.net
#273
I'm not sure either - my cabrio only has space for a single 194 5 LED bulb, but I know that the hard tops have a more traditional plastic dome light shield. Just thought I'd mention it since the product could very easily be used as footwell accent lighting (just use the 194 adapter and the OEM lamp housing, then stick the array anywhere you like) or even in the boot (use a festoon or 194 adapter depending on your car, then adhere the array to the underside of the privacy tray... Uses are only limited by imagination with something like this.
#274
I'm not sure either - my cabrio only has space for a single 194 5 LED bulb, but I know that the hard tops have a more traditional plastic dome light shield. Just thought I'd mention it since the product could very easily be used as footwell accent lighting (just use the 194 adapter and the OEM lamp housing, then stick the array anywhere you like) or even in the boot (use a festoon or 194 adapter depending on your car, then adhere the array to the underside of the privacy tray... Uses are only limited by imagination with something like this.
Last edited by Rally@StanceDesign; 05-24-2007 at 08:46 AM.
#275