Interior/Exterior To Dremel. Or NOT... ?
#1
To Dremel. Or NOT... ?
If anyone notices. There is one missing switch in the Mini Cooper (Some). The Rear Fog light switch. Is there anything electrical under that portion where the switch is Supposed to be? Thinking about moving my bass **** OR little whistle button there. If there is at least 3 CM of space behind "it". "it" will be possible. Please let me know before so (later today)
EDIT: Right now is 12:28AM
EDIT: Right now is 12:28AM
#2
#3
Pull toggle switch bank (remove downtubes, unscrew)
Disassemble switch bank (just snaps apart, top and bottom)
Drill (better than dremel) hole in blank spot
Then comes the tricky part - access through/around the PCB
There's a thread around here somewhere that demonstrates someone installing their Aux-in port in the empty toggle spot.
Disassemble switch bank (just snaps apart, top and bottom)
Drill (better than dremel) hole in blank spot
Then comes the tricky part - access through/around the PCB
There's a thread around here somewhere that demonstrates someone installing their Aux-in port in the empty toggle spot.
Thread
Thread Starter
Forum
Replies
Last Post
TyrolSport
Vendor Group Buys
21
05-20-2015 08:02 AM
TyrolSport
Drivetrain (Cooper S)
17
03-04-2011 10:50 AM
OctaneGuy
R55 :: Clubman Talk (2008+)
6
08-08-2010 02:05 PM
Reinheim
R50/R53 :: Hatch Talk (2002-2006)
16
01-17-2006 09:30 PM