Wheel size
Hi
Anyone know what size wheels the National Champ in H S ran last year 15, 16 or 17? Both cars at the Dixie National ran 16" Thanks TomT |
I am fairly sure he ran the Kumho V720s in 205/50/15 size.
|
Thanks, Interesting choice. A 205 45 16 would be the same overall size and you could use a 7" wide rim.
Hummmm |
The 2015 Nationals results list Reno's tires as Bridgestone. His listed sponsors also included Bridgestone.
http://cdn.growassets.net/user_files...pdf?1444922039 |
Interesting. He ran Kumhos the majority of the year and even dabbled in the BFG Rival S for a very short time.
|
What wheels was he using? it's tough finding 15x6.5 in et 41. it's either et38 or et 45
|
Originally Posted by JN2k108
(Post 4200933)
What wheels was he using? it's tough finding 15x6.5 in et 41. it's either et38 or et 45
|
Aren't the 16" OEM wheels 48et? A 15x6.5 by SCCA rule is a 16x6.5 minus one inch of diameter.
|
do you know what the 17x7s are? the ET for them at least?
|
Originally Posted by kyoo
(Post 4208652)
If you really wanted to run the 15x6.5, et38 works - we have 7mm of give in either direction from stock, don't we? I personally run 16x7s - I think for street tires the width is important. Reno would win on anything he drove on lol
regardless, I asked a fellow STF national autocrosser, he said that most people get a wheel and shave it down to the correct offset say if it was et40, they would shave it down 1mm.
Originally Posted by hsautocrosser
(Post 4208681)
Aren't the 16" OEM wheels 48et? A 15x6.5 by SCCA rule is a 16x6.5 minus one inch of diameter.
Originally Posted by kyoo
(Post 4208683)
do you know what the 17x7s are? the ET for them at least?
|
Originally Posted by JN2k108
(Post 4208688)
max offset for 15x6.5 is et41- et55
regardless, I asked a fellow STF national autocrosser, he said that most people get a wheel and shave it down to the correct offset say if it was et40, they would shave it down 1mm. You are correct. 17x7 stock offset is et48. |
Originally Posted by kyoo
(Post 4209432)
that's too bad - these wheels - look great but far off in offset. oh well
|
Originally Posted by JN2k108
(Post 4209549)
Well since they are et37, you would need to shave down 4mm. The RPF1 is probably the best bet for 16x7 or the SSR.
|
All times are GMT -7. The time now is 08:31 AM. |
© 2024 MH Sub I, LLC dba Internet Brands