GP2 Wheel Fitment
#1
GP2 Wheel Fitment
Please post here on what wheels you have found to fit over the GP2 front brakes as this may make a great reference thread later.
I found my BBS RGRs 17 inch will only fit with a 10mm spacer.
Also Factory JCW R112s also require a 10mm spacer to clear.
Will be test fitting some NM wheels this coming week.
I found my BBS RGRs 17 inch will only fit with a 10mm spacer.
Also Factory JCW R112s also require a 10mm spacer to clear.
Will be test fitting some NM wheels this coming week.
#3
Just a note for anyone checking, as well as checking clearance of the brakes you also need to check clearance from the front suspension. From my experience with bilstein coilovers on my JCW some some rims will clear the brakes with 10m spacers but may need 15mm for the springs. I suspect the GP will probably be the same.
#7
Please post here on what wheels you have found to fit over the GP2 front brakes as this may make a great reference thread later.
I found my BBS RGRs 17 inch will only fit with a 10mm spacer.
Also Factory JCW R112s also require a 10mm spacer to clear.
Will be test fitting some NM wheels this coming week.
I found my BBS RGRs 17 inch will only fit with a 10mm spacer.
Also Factory JCW R112s also require a 10mm spacer to clear.
Will be test fitting some NM wheels this coming week.
Trending Topics
#9
2nd Gear
iTrader: (2)
Join Date: Sep 2010
Location: SF Bay Area
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
What's the factory solution for this? I was under the impression that they shipped with JCW R112 wheels if you specified runflats.
http://www.motoringfile.com/2012/10/...-options-list/
http://www.motoringfile.com/2012/10/...-options-list/
#10
What's the factory solution for this? I was under the impression that they shipped with JCW R112 wheels if you specified runflats.
http://www.motoringfile.com/2012/10/...-options-list/
http://www.motoringfile.com/2012/10/...-options-list/
#13
#16
I also am not a fan of the OEM wheels... I also have a set of 18x9 HRE's that I will be fitting this week- they are definitely more agressive- had an issue with fitting the TPMS sensors today so I have to do a little dremel surgery so they can lay flat on the barrel- those clear as well and will update with photos once I get them permenantly mounted.
#17
I plan to keep them so I can switch them back to stock when the time comes. All my cars are low (minus my SUV) and I have predetermined routes everywhere I go I dont plan to dump it- but want it a little lower... would like the fronts to match the rears in my pics
#19
#20
#21
Just finished test fitting the NM RSe05 17inch wheels fit and clear the brakes fine.
Confirm you don't need a spacer with these NM Wheels?
What is the cost of the TPMS for each wheel? I didn't see them available on your site.
Last edited by Chief_Charlie; 04-08-2013 at 11:14 PM. Reason: additional question
The following users liked this post:
Johnna (05-08-2022)