What did you do to your mini today?
escape from New York
Today is a nice overcast day. Mini could not stay still and wanting to go drive in the twisties. I thought why not go get a New York style pizza. I used to live close to Escape From New York Pizza, but no more. It dawn on me that instead of fighting the bad traffic of Portland, I can take another route which consists of a section of twisties up the hill and down to where the Pizzeria is.
It was not the best time so I drove cautiously despite Mini kept wanting to go faster. We had the headlights on for the trip. You just don't know what can pop out of the blind curves. We got there within the minute the Pizza is scheduled to be ready. 20 minutes there and 20 minutes for the return trip. Most of the challenge is dodging bad potholes.
Escape From New York is one of the very few places that I would want a pizza.
It was not the best time so I drove cautiously despite Mini kept wanting to go faster. We had the headlights on for the trip. You just don't know what can pop out of the blind curves. We got there within the minute the Pizza is scheduled to be ready. 20 minutes there and 20 minutes for the return trip. Most of the challenge is dodging bad potholes.
Escape From New York is one of the very few places that I would want a pizza.
Hitch isn't connected to any wheels and is outside of the wheelbase. Zero performance benefit.
The following users liked this post:
WayMotorWorks (09-04-2017)
Speaking of this --- I've inherited an RV (van w engine, not a towable) that hasn't been run for 4 years. Does one need to do anything special to an engine before starting it?
(Starting it isn't an option anyway, since the battery is totally flat. Plus, the brakes were shot when parked; it was towed into place.)
(Starting it isn't an option anyway, since the battery is totally flat. Plus, the brakes were shot when parked; it was towed into place.)
Speaking of this --- I've inherited an RV (van w engine, not a towable) that hasn't been run for 4 years. Does one need to do anything special to an engine before starting it?
(Starting it isn't an option anyway, since the battery is totally flat. Plus, the brakes were shot when parked; it was towed into place.)
(Starting it isn't an option anyway, since the battery is totally flat. Plus, the brakes were shot when parked; it was towed into place.)
as long as it has oil and coolant in there I wouldn't stress too much if it's just turning it over, but best practice would be fresh oil and fuel at least.
Oh -- you ARE in my area! I'm looking for $13,000 for a 2004 Roadtrek 190 Popular, about 83k miles. Needs brakes, battery .... and all RV functions are unknown (AC, heater, generator, plumbing, refrig, gas stove, microwave). They list for about twice this (and with 125K miles, too). But this needs a lot of work ....
Just about finishing up on my upgrades to my mini since I blew up the turbo.
Here is the list of added/replaced parts
Catless downpipe heat wrapped
New turbo exhaust manifold heat wrapped
New K04 dominator gt45 turbo
Radiator and all new hoses
Sneed speed oil cooler
WMW turbo heat blanket
Fabricated tower brace
2 1/4" aluminum cold side boost tube
Set of 2 degree colder spark plugs
6UL 15x8 wheels with 225/50ZR15 Toyo Proxes RR race tires (13lbs lighter than old 18" wheels)
Still lacking the last few pieces of piping for my CAI. Mariokart I haven't forgot about you this just took longer than I thought. I'll be calling you in a few weeks for that ECU tune.
Then on the scales for a corner balance and out to the track for testing. Can't wait!
Here is the list of added/replaced parts
Catless downpipe heat wrapped
New turbo exhaust manifold heat wrapped
New K04 dominator gt45 turbo
Radiator and all new hoses
Sneed speed oil cooler
WMW turbo heat blanket
Fabricated tower brace
2 1/4" aluminum cold side boost tube
Set of 2 degree colder spark plugs
6UL 15x8 wheels with 225/50ZR15 Toyo Proxes RR race tires (13lbs lighter than old 18" wheels)
Still lacking the last few pieces of piping for my CAI. Mariokart I haven't forgot about you this just took longer than I thought. I'll be calling you in a few weeks for that ECU tune.
Then on the scales for a corner balance and out to the track for testing. Can't wait!
The following users liked this post:
ECSTuning (09-08-2017)
Just about finishing up on my upgrades to my mini since I blew up the turbo. Here is the list of added/replaced parts Catless downpipe heat wrapped New turbo exhaust manifold heat wrapped New K04 dominator gt45 turbo Radiator and all new hoses Sneed speed oil cooler WMW turbo heat blanket Fabricated tower brace 2 1/4" aluminum cold side boost tube Set of 2 degree colder spark plugs 6UL 15x8 wheels with 225/50ZR15 Toyo Proxes RR race tires (13lbs lighter than old 18" wheels) Still lacking the last few pieces of piping for my CAI. Mariokart I haven't forgot about you this just took longer than I thought. I'll be calling you in a few weeks for that ECU tune. Then on the scales for a corner balance and out to the track for testing. Can't wait!
Thanks
Mario
mQubed Motorsport, Manic Tuning Dealer
__________________
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
2013 GP2 #295, 270whp/310wtq, KO4 47mm Turbo, 18" NM Wheels, Alta intake, Manic Stage III+, HFS-3 Meth, 30% E85 Blend, Forged IC, Alta Hot Pipe, P&P/Ceramic Exhaust Manifold, m3 Extreme Ceramic DP, Vibrant mid res, 4" Double walled Tips, WMW/KW V3 CO, Alta Rear CA, CREE Fogs, Black out F/R Rings and Gas Cap, M7 CF Front Splitter, and No Stickers. MORE TO COME!! Previous 04Triple Black 17% Alta, MM Air/H2O, CAI, OBX Header, FBT Head, Shrick Cam, 234whp
The following users liked this post:
MiniBeemer (08-12-2023)
Kudos on your fun drive, but that pizza looks very disappointing.
Moderator
iTrader: (3)
Just about finishing up on my upgrades to my mini since I blew up the turbo.
Here is the list of added/replaced parts
Catless downpipe heat wrapped
New turbo exhaust manifold heat wrapped
New K04 dominator gt45 turbo
Radiator and all new hoses
Sneed speed oil cooler
WMW turbo heat blanket
Fabricated tower brace
2 1/4" aluminum cold side boost tube
Set of 2 degree colder spark plugs
6UL 15x8 wheels with 225/50ZR15 Toyo Proxes RR race tires (13lbs lighter than old 18" wheels)
Still lacking the last few pieces of piping for my CAI. Mariokart I haven't forgot about you this just took longer than I thought. I'll be calling you in a few weeks for that ECU tune.
Then on the scales for a corner balance and out to the track for testing. Can't wait!
Here is the list of added/replaced parts
Catless downpipe heat wrapped
New turbo exhaust manifold heat wrapped
New K04 dominator gt45 turbo
Radiator and all new hoses
Sneed speed oil cooler
WMW turbo heat blanket
Fabricated tower brace
2 1/4" aluminum cold side boost tube
Set of 2 degree colder spark plugs
6UL 15x8 wheels with 225/50ZR15 Toyo Proxes RR race tires (13lbs lighter than old 18" wheels)
Still lacking the last few pieces of piping for my CAI. Mariokart I haven't forgot about you this just took longer than I thought. I'll be calling you in a few weeks for that ECU tune.
Then on the scales for a corner balance and out to the track for testing. Can't wait!
Nice!, So rare to see that BMC CF intake
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
pizza
The photo does not do justice to the cheese pie from this place. Their pizza is the only one that I would order. I drove over the hills on the back roads to the other side of town just to get one. They have much better dough, sauce, and ingredients over the run of the mill places nearby my home.
Seriously read what they say on the box:
Seriously read what they say on the box:
performed air filter test
I want the best for my street car named Desire. Today I devised a simple test fixture to compare the flow restriction between the stock air filter, and a K&N drop-in panel filter. I chose K&N because it is made of high quality cotton gauze - like those used in aviation.
my neighbor wanted to see the result of my experiment
And you can find out which is the winner here.
my neighbor wanted to see the result of my experiment
And you can find out which is the winner here.
The photo does not do justice to the cheese pie from this place. Their pizza is the only one that I would order. I drove over the hills on the back roads to the other side of town just to get one. They have much better dough, sauce, and ingredients over the run of the mill places nearby my home.
Seriously read what they say on the box:
Seriously read what they say on the box: